Setting up the environment in WLS 7.0 and deplying?

Hi,
Previously I have used WLS 6.1.
I have set up the properties file and the required folders in the mydomain folder for the classes. It worked fine for me.
Now when I am using WLS 7.02.
This looks complicated. I have seen the documentation, it tells about different folders other than config like stage and server.
My question is can I use the same old environment setting as in 6.1 in 7.02 and deploy the applications as before.
If not, am I missing anything.
If anyone has worked on WLS 7.02, please let me know how you have set up the environment and deplyed the applications.
Thanks in Advance
Rama
[att1.html]

"rama" <[email protected]> wrote in message news:[email protected]..
Hi,
Previously I have used WLS 6.1.
I have set up the properties file and the required folders in the mydomain folder for the classes. It worked fine for me.
Now when I am using WLS 7.02.
This looks complicated. I have seen the documentation, it tells about different folders other than config like stage and server.
You dont have to setup anything extra for 7.x deployment. The server and stage directories will take suitable defaults.
See 'Using WebLogic Server 6.x Deployment Protocol' in http://e-docs/wls/docs70/programming/deploying.html
My question is can I use the same old environment setting as in 6.1 in 7.02 and deploy the applications as before.
If not, am I missing anything.
If anyone has worked on WLS 7.02, please let me know how you have set up the environment and deplyed the applications.
Thanks in Advance
Rama
[att1.html]

Similar Messages

Setting up the environment

Hello
I have just started working on Weblogic server 8.1 on a Windows XP machine.
In order to set up the environment I ran the batch file 'setWLSEnv.cmd'.
I noticed that the new settings for PATH and CLASSPATH variables did not reflect
in the values of PATH and CLASSPATH when viewed through the control panel on my
machine. Also WEBLOCIG_CLASSPATH did not show up either on my control panel.
Are these settings visible only to the Weblogic server and does this mean that
I need to run the batch file 'setWLSEnv.cmd" everytime I want to start the Weblogic
server.
Thanks for your help.
Naveen

You don't need to do anything in the environment to use a MIDI keyboard, it just needs to be connected via a MIDI input. If you select an Audio instrument track (as opposed to Audio or external MIDI track) you should see the track strip at the left hand side and a button labelled 'Input'. Click and hold on this and a hierarchical menu appears for you to select an instrument plug in, so select one and then play on your keyboard.

I am trying to set up the ipod to my email account and it keeps saying it won't work, even though we have confirmed user name and password. Any advice?

i am trying to set up the ipod to my email account and it keeps saying it won't work, even though we have confirmed user name and password. Any advice?

Try deleting the account from the iPod and try reentring all the information again. A lot of times it is easier to reenter the information rather than trying to find and correct the error.
Try Googling for how to setup the email account for your provider on an iPhone. You can try for an iPod Touch but frequently that does not exist.

Setting up the environment for a WebLogic Ant task

The documentations always starts:
1.. On Windows NT, execute the setWLSEnv.cmd command, located in the
directory WL_HOME\server\bin, where WL_HOME is the top-level directory of
your WebLogic Server installation.
2.. On UNIX, execute the setWLSEnv.sh command, located in the directory
WL_HOME/server/bin, where WL_HOME is the top-level directory of your
WebLogic Server installation.
How much of what's in those bat files (or sh files on UNIX) do I actually
need? Can I set the environment in Ant without calling the batch files --
i.e. no system environment variables?
TIA,
Robert Snyder
[email protected]

Being a JBoss geek I cannot let it pass to recommend to at least investigate JBoss 7.1 as a possible alternative to Glassfish :)
Also MySQL works fine and is very common and thus very much documented, which is a big plus. But I would not pass up the chance to look into PostgreSQL as well. To me that is basically the perfect balance between the simplicity of MySQL and the power of an Oracle DBMS.
It depends on what you want to do with it of course, a simple web application works perfectly fine on MySQL, but then you probably also don't need the horsepower of a full enterprise container. You can also just use Tomcat 7 which is fast, easy to setup, well documented and doesn't use up so many resources either.

TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

Why did I get three sets of the log in installation info? and none of the pass codes work?

I bought a brand new iMac in June so I qualified for the free upgrade. AFter I submitted my info I received three sets of the emails that are supposed to allow me to download and install. Howver, when I clickon them and try to use the log in and pass code information, the codes are too long and the files won't read them. Any info on this situation? I emailed the help support directly but have not heard

already tried that too I even went to the Apple store and asked about it and they said they heard people had similar problems but have not heard of a resolution......

AppleMoblieDeviceHelper.exe - error while setting up the environment...

I am having problems with iTunes 8.2.1.6 on my Vista PC. I am getting the following two errors whenver I try to sync my iphone 3Gs:
(1) 16bit MSDOS subsystem: c:\program files\common files\apple\mobile device support\bin\applemobiledevicehelper.exe - Error while setting up environment for the application. Choose 'close' to terminate the application. This error message continues to show up even when I hit 'close'.
(2) iTunes was unable to load dataclass information from Sync Services. Reconnect or try later.
I have tried running both iTunes and applemobiledevicehelper.exe in administrator mode and that does not help. I have also tried reinstalling iTunes.
Any ideas?

Hi Sahil,
To address your scenario, while creating the configuration, select all the required agreements to create one configuration and then deploy.
Alternatively, you can also apply the latest patch MLR (10.1.2.3)
Regards,
Dheeraj

I upgated my Firefox and neither Firefox or IE can use the Proxie server and the sceen to set up the Proxie server is grayed out and not changable.

I am using windows 7 and have used Firefox many years the last time I upgraded I could not connect to the World Wide Web sites but the direct connect sites ie. LOTRO work fine. Internet Explorer comes up with a "proxy server is not responding" and dose not load the page. When I follow the instructions to change the proxy server settings the page to do that all of the proxy buttons and wording is grayed out, not changeable. The other computers in the house work fine. The Upgrade of Firefox seem to corrupted the program for the proxy control.
jmaraszek

Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
You should check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You do the network.proxy settings show on the <b>about:config</b> page?
network.proxy.type
network.proxy.http
network.proxy.http_port
Do they show as locked (italic)?

My six year old set up the restrictions code on my iPad and he doesn't remember the code he used. How can I find out the code. I already tried reseting the iPad and it did not work.

How can I retrive the passcode for Restrictions? I already tried reseting my iPad to factory settings but did not work.

I believe there is a way to reset the settings only, but I'm not sure if that applies to restrictions. Maybe there is a way on the computer?

Hi, just had my pac code transferred over, but when i call someone my own new sim card number comes up and not my original number. On setting s the sim card number is on and I dont know how to change it. Any ideas?

I took out a new contratc with three and they have imported my number, but my sim card number keeps coming up when I make calls. How to i change the settings on the ipone to reflect my original number. Any ideas please?
Thanks

Are you able to change your number is Settings>Phone>My Number?

Runtime Error setting the 'Environment' when running with TWO executables

Hello,
I'm using XML DB for the very first time, so this problem may be easy to solve.
I'm currently running a test with TWO separate C# Console executables.
One executable correctly sets up the Xml Environment, Manager, and Container and simply adds XML documents to the database.
The second executable simply is supposed to run some XQuery commands. I use the same Environment, Manager, and Container code to do the initialization. However, I'm having trouble with setting up the 'Environment' in this executable. I get the following error:
DbEnv::open: DB_RUNRECOVERY: Fatal error, run database recovery, exception code = DATABASE_ERROR
On this line of code:
Sleepycat.Db.Environment env = new Sleepycat.Db.Environment(envdir, envconf);
I've only seen code examples that run in a SINGLE executable. I'd really like to access the XML DB from multiple threads/executables, but am having trouble.
Can there be multiple 'Environments' and 'Managers' for the one XML Db?
Will provide more data if needed, and thanks for any help!
Matt

I guess you addressing this in the wrong forum. I see tags like "sleepycat" and "C#", probably thats why nobody replied.

How to Set up the variables and others to compile and Run Java Programs

Hello,
I have just downloaded the jdk1.6.0_07 and jre1.6.0_07 and installed it in C:\Program files\Java in my Windows XP ,So please tell me how to sett up the enviroment variables etc to compile and run Java Programs from Command Prompt.
thanks

To set the PATH permanently, add the full path of the jdk1.6.0_<version>\bin directory to the PATH variable. Typically this full path looks something like C:\Program Files\Java\jdk1.6.0_<version>\bin. Set the PATH as follows on Microsoft Windows:
1. Click Start > Control Panel > System on Windows XP or Start > Settings > Control Panel > System on Windows 2000.
2. Click Advanced > Environment Variables.
3. Add the location of bin folder of JDK installation for PATH in User Variables and System Variables. A typical value for PATH is:
C:\Program Files\Java\jdk1.6.0_<version>\bin

Adding a track when out of Objects in The Environment

Hi,
I use GarageBand 2 (GB2) to get the idea down quickly when the inspiration strikes. It works perfectly for that purpose. To take a song from that initial idea to the finished product, I import the song into Logic Pro 7.1.1 (LP7).
All in all, LP7 is a very good-, comprehensive- and versatile product, but the one thing that keeps frustrating me beyond belief is "The Environment". I have read and re-read the documentation on "The Environment" several times, but I just hit a road block every time I need to add a track if I'm out of objects in The Environment (Audio, Midi or Audio Instrument). When I choose "Track -> Create With Next Instrument" and there is no "Next Instrument" left, I'm stuck.
My current workaround is that I add plenty additional "Real Instrument" and "Soft Instrument" tracks in GB2 before importing the song into LP7. The import routine takes care of setting up The Environment. But sometimes I don't add enough tracks and then I'm stuck again.
Can anyone suggest a reasonably straight forward way of adding a track once you're out of objects (Audio-, Midi- or Audio Instrument) in The Environment, please?
Thx & brgds,
...tt

Well, I've tried both of those and that's where the problems arise.
If I do "Track -> Create Multiple..." I get the error message "No more tracks available".
If I create an Audio Object in the Environment, double-click on its icon to transform it into a channel strip, and then try to assign the desired channel, only the channels that are already taken appear in the pull-down menu. If I go back to the Arrange Window and choose "Track -> Create" a new track is created given the same name and linked to the same Audio object and channel as the previously last Audio track. Going back to The Environment I still only have the same channels as before to choose from.
In GB2, in Cubase and in Sonar all you have to do is create a new track and choose whether you want it to be an Audio track or a Midi track. I just don't get why it has to be so complicated in Logic?
What am I doing wrong?
...tt

External Midi Instruments in the Environment - Can't get things to work....

I have a MOTU MicroExpressUSB 4INx6OUT MIDI interface that's been defined as follows in my Audio/midi Setup.
1 - Mackie HUI (I/O)
2 - Keyboard (I/0)
3 - Keyboard (I/0)
4 - Roland Elect Drum Kit TD12 (I/0)
5 - Sound Module (0 only)
6 - Sound Module (0 only)
By itself (outside Logic), the interface triggers and appears to work fine
However, in Logic it's a different story. I've read the manual backward/forward and the environment subject is very confusing and what's not clear is how the path is connected (or cabled...) I've defined multi-instruments (with actual patch names) in my environment, I have assigned ports and sub-channels accordingly and all this is fine. Patch names come thru in pull downs, but the problem is nothing is talking to the interface thru Logic.
I've tried putting the "Port IN" object into my MIDI environment which I understand is supposed to emulate the midi interface as configured in your A/M setup. The object I got was a 4-port object that also includes a "sum" port. I'm guessing you're supposed to cable the ports to each multi-instrument assigned a port and I've done this accordingly. However, I see no way to cable the sound modules that are only Midi OUTS of my interface. This makes sense given this is a "Port IN" object, but I see no other object that would allow me to cable the outs and hence I curious how Logic will talk to the sound modules.
The manual also talks about the "sequence" object that everything has to route thru in order for Logic to process MIDI. Since the manual is not clear on how to cable this object either I took a guess and cabled the "sequence" object to the "sum" port on the "Port In" object.
This is as far as I've been able to get, but nothing is working and Logic is not talking to the interface because no interface indicator lights (ie: IN,OUT,trigger, etc). Picking a program from a pull down menu also does nothing.
It can't be that hard to control external instruments, but the manual being clear as mud has not helped. I'm sure it's something to do with this crazy environment, the way things are "cabled" or defined, but I've not been able to figure it out.
Sorry bout the book, but there's a lot of info here. Any help or insight would be appreciated.
thanks in advance...

I think this recent post can help you.. i hope
http://discussions.apple.com/thread.jspa?threadID=2008908&tstart=50
in the thread you download a file tha help a lot about environments windows
feel free to ask for additional question
regards
G

Setting up the environment in WLS 7.0 and deplying?

Similar Messages

Maybe you are looking for