Setting-up the Internet Connection

Hi All, my systems has the following Linksys products:
modem - ADSL2MUE
wireless router 1 - WRT54GS (1st floor)
wireless router 2 - WRT54G (2nd floor)
switch - SR2024 (for cable connections)
I was able to connect all the PC to the internet. My problem is I could not make all the PC be in same Gateway number in which I could not share the network printers and files to all PCs. Is there any way to solve this problem? Below are settings to each device:
ADSL2MUE - Bridge Mode only
WRT54G - IP Address (192.168.1.1), PPPoE
WRT54GS - IP Adress (192.168.2.1), DHCP
* ADSL2MUE Internet Port is connected to WRT54G Internet port
* WRT54G Ethernet Port 1 is connected to SR2024 Ethernet Port
* WRT54GS Internet Port is connected to SR2024 Ethernet Port
* Printer 1 is connected to SR2024 Ethernet port (2nd floor)
* Printer 2 is connected to WRT54GS Ethernet Port (1st floor)
* All PCs in the 1st floor is using 192.168.2.1 gateway number thru WRT54GS wireless connection.
* All PCs in the 2nd floor is using 192.168.1.1 gateway number thru WRT54G and SR2024.
I need your help on this.
Best rgds, joven

It does not matter how you set the internet connection type on the second router when nothing connects to the internet port. The internet connection type is used for the configure of the connection through the internet port. As nothing is connected in the internet port the setting is basically inoperable and makes no difference whatever you set there. You should not set a static IP address as that may affect the routing tables on the router even if the internet interface is down. Thus, just leave it on Automatic/DHCP and it should be fine.

Similar Messages

  • My iPad keeps loosing the internet connection. All of my other devices work. Last time this happened, comcast charged $49 to fix it. They said that it's somethin that I downloaded. How can I get back my internet connection on my iPad ?

    My iPad keeps loosing the internet connection. Last time this happened comcast charged $49 to fix it. They said that the problem was perhaps caused by something that I down loaded. All my other devices still connected to internet. Tried to reset my settings. Still won't work. Any advice ?

    First, changing your DNS settings could not possibly have any effect on this problem.
    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • Please, help me to set up wireless Internet connection. M...

             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?

    Pensive wrote:
             Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
    First, I can’t open password request screen on http://192.168.1.1. 
    Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail. 
    Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
    Tell me please: what’s the matter?
    hi pensive ,
     Seems interesting , first do this -  push the reset button on the back of router .
    push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
    then try to log into , 192.168.1.1 again . with the password "admin".
    see if it reply?
    Else -
    strt>cmd>ipconfig /all - post the result ?
    pe@c3
    Message Edited by meteor on 01-09-2008 05:58 AM
    ~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

  • When i open firefox it runs in background but does not open. if i disable the internet connection immediately it opens. each and every time i do this when i start work. what kind of problem is this

    i am using windows xp profession sp3 os
    when i open firefox it runs in background but does not open(see through task manager or one message "firefox is already running in background" when i again click the icon.)
    if i disable the internet connection, immediately it opens. each and every time i do this when i start work. what kind of problem is this
    == This happened ==
    Every time Firefox opened
    == i every time starts firefox

    I had the same problem and it was because of my firewall settings, which I had set to block all activity and forgot to reset it.

  • Asking to set up an internet connection when we press approve button

    Hi friends can u expalin me
    when i press approve button in the notification it is asking for set up an internet connection wizard
    i am attaching the screen shot can u have a look please
    thanks
    sesh

    Probably you are working on the server itself (windows) i.e the same machine on which you have installed Oracle Applications and the time you press the notification it is trying to send a email for which the wizard comes up.
    Anyways i did not see any screen shot.
    Sam
    http://appstech-sam.blogspot.com

  • HT204053 I have IMac OSX6.8 and have just purchased a iPod Touch. When I enter my Apple ID and PaswordI get "Verification Failed.  The internet connection appears to be off line"  My internet connection via my livebox is not off line so why cant I connect

    I have purchased new iPod Touch from Uk for english use in France. When trying to set up and log into iCloud i get "Verification Failed.  The Internet connection appears to be off line."   My internet is on line via my Livebox so what am I doing wrong?

    Have you gone into Settings to verify that your ipod is connected to some router?  Have you logged in with the security code (if there is one defined for that router)?  If it says the internet connection is offline, then the ipod is not properly connecting to the internet.  Perhaps the router is the problem - new iDevices require routers have the latest firmware.  Older appliances might connect through them, but many users have found that their routers don't work with newer devices.
    Try doing this again at some public wifi area as a test.

  • My computer loses the internet connection

    hello,
    I have a big problem. When I connect my iPhone, my computer loses the internet connection. Before everything was perfect. I have my iPhone since June 2010.
    I need your help please

    I may have the same/a similar problem.  I got the my WRT54GS v7 router on Wednesday (12/26) but I didn't have a change to install it until Sunday (12/30).  I was able to get it set up just fine (PPPoE access through local SBC DSL)... my wife and I got our computers hooked up (wired) to the router, and our Wii was hooked up wirelessly.  Everything seemed to be working great... but the router seems to be dropping the connection every few hours.  If I power off/power on the router, it finds the connection again... but I don't want to be resetting the router every few hours from now until forever.  I'm not 100%, but this may very well be happening every time we connect wirelessly... the first time was when we got the Wii set up, then when a friend connected wirelessly, and then again with the Wii a few more times.  I know it is not the internet connection myself... we've had this connection for a few years, and used an older Linksys router that worked just fine (we went to WRT54GS to go wireless).  The router is locked down with WPA2-personal encryption, and quite a long random string to get in, so I'm pretty sure it is not outsiders.  I tried a firmware upgrade and that didn't help at all either.  I'd be interested in seeing a solution to this problem soon please!  (I'm not sure I understand the instructions of the one response already on this thread.)

  • My MBP keeps dropping the internet connection

    Since yesterday, my MBP (Late 2011) keeps dropping the internet connection from my Airport Express.  I'm still connected to the network, it just loses the internet connection on the MBP.  I restart the computer, and it works for a few minutes.  I turn off router, and it works for a few mimutes...but no matter what I do, after 2-3 minutes, I get the exclamation mark in the wifi indicator saying there is no internet connection.
    And this is only happening on that single MBP.  All of the other devices in the house, another MBP (mid 2012), an iPad (retina with lightning connector) and 2 iPhones (one 4 and one 5), can all connect.  And the router we have is an airport express. 
    Why is this happeneing only on the one computer, and how can I fix this?
    Thanks.

    First, changing your DNS settings could not possibly have any effect on this problem.
    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • The internet connection is currently in use by another computer

    I am trying to replace my old linksys router with Airport Express. I can get it connected and and I can access the internet on my MacBook but when I try to use WiFi on my iPad, I get the message "The Internet connection is currently in use by another computer (172.16.1.11)" from Earthlink, my ISP.
    I have a Netopia modem from Earthlink. My MacBookPro is running OSX 10.9.4.
    I understand that I need to have the AirPort Express look like the only device attached to the Netopia modern, and then the AirPort Express will handle multiple devices' connections correctly (MacBook Pro, iPad, iPhone). I just can't figure out how to set this up.

    There is nothing you can do.. if you want more than one device connected then you must double NAT. This is common practice with Satellite providers.. I am not sure why they cannot afford to buy a block of public IP.. maybe it is deliberate to prevent people using servers.
    Just select ignore in the airport utility.. for the double NAT problem.. this is the equivalent to sticking your head in the ground and therefore your problems don't exist. (your opponents cannot see you if you have a bird brain!!) Of course when the opportunity comes up.. move. Go to fibre or 3g/4g with a reliable ISP who hands out public IP. Until then tighten your belt.. short commons are the order of the day.

  • I am missing the internet connection icon under my systems.  How do I get it back?

    I am missing the internet connection icon under my systems.  How do I get it back?  I am trying to eliminate an unvalid gmail account and add my new gmail account for work.  It exists already so I don't want to create one.  I can't get my computer to switch from the unvalid account.  Per YouTube I need this application to set up Safari to switch between accounts.   Help please!

    If you are on a Mac, you can connect to a network either using WiFI or an Ethernet cable. These are both available under System Preferences.
    What are you referencing as 'Internet' connection?

  • IMac hogging the internet connection from PC

    I have a serious issue with my iMac hogging the internet connection from my boyfriends PC. If I download he can't even look at a youtube video. Does anyone have a solution or an explanation?
    It's driving us both mad!

    Hmm. Basically it sounds like when you connect you 'steal' the Internet connection and I can think of two ways that would happen. Open System Preferences and select the  Network tab. Now click on the advanced button then in the top tab click on TCP/IP and you'll something like this:
    Note that in the graphic above, next to Configure IPv4 you see Using DHCP. I'm wondering if yours is set differently. For that matter, I'm wondering how his computer is set up too.

  • HT1430 My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • How to fix the internet connection on itunes

    Everytime I run the diagnostics it tells me that the internet connection test and the secure link to itunes store test has failed. And when I try to go to the itunes help it says I need internet connection to do so. My internet connection is fine though. Any ideas on hwo to fix this? I even tried uninstalling and reinstalling itunes.

    PROBLEM SOLVED.
    Another web site tipped me off. Here is their fix:
    We figured out a way to get around this latest set of errors, for Vista users.
    Go to itunes. By default, it installs to c:\program files\itunes. (the shortcut link will not work).
    Right click on the file, and go to properties.
    Click on the compatiblity tab.
    Click on the checkbox for run this program in compatiblity mode for:. By default it will go to Windows XP (Service Pack 2). That is fine.
    Click ok, and then run Itunes. That allowed us to access the Itunes store.
    SOURCE: http://www.geekstogo.com/forum/iTunes-could-not-connect-to-iTunes-Store-t144947. html&st=15

  • Nokia C3 - To interrupt the Internet connection?

    Please how to interrupt the Internet connection? After the off-switch on the phone always online.
    Thank you very much.

    have you email set up on your phone ?
    Menu > Settings > Connectivity >
    Packet data > Packet data connection
    When needed
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How can I sync the calendar and contacts from my icloud account to the new icloud account we set for him.  I have already set up the Family connections.

    How can I sync the calendar and contacts from my icloud account to the new icloud account we set for my husband on his iPad and iPhone 5S?  I have already set up the Family connections but they are not syncing.
    Thanks.
    Jenny

    Oops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.

Maybe you are looking for

  • Manipulating data in Excel inplace via ALV grids

    Hi everybody, I want to create a report which displays data in an Excel file (Excel inplace). To solve the problem I have created a custom layout and uplodaded it via the report BCALV_BDS_MAINTENANCE to the BDS. The written report loads the data into

  • Error in converting exchange rate

    Hi , While trying to create a sales order , I get an error "Condition YAGC : Error in converting exchange rate from KGAG to EUR." while trying to change the amount and the currency for the pricing condition YAGC.By default the currency comes up as EU

  • DG4MSQL: Multiple instances not working (only single instance)?

    Hi I've been successfully using DG4MSQL for months to extract data from a local SQL Server 2005 instance to our 10g Ent 10.2.0.3 instance. Today I was asked to add two more SQL server DB links on separate servers running the same version of SQL Serve

  • Via Floppy 64 bit driver

    Hi anyone know where the link is to create the SATA driver for F6 / S for the 64 bit version of Windows please I had it from here before but Can't find it now, the first copy I had got damaged and became corrupt. Many Thanks

  • Userexits for normal and SAP enjoy transaction

    I have a question - are all user exits that we have used for normal transaction ( Say ME21) are also applicable for the new SAP Enjoy Transaction( Say ME21N). In case there are some user exits which are not applicable for new transaction how can we f