Setting up the Network Folder through the EWS.

Hi,
I'm having trouble setting up the network folder feature in the EWS. I created a destination folder on my desktop in another folder called (desktopfiles). In the EWS - in the display name field - I called the folder (HP Files).
In the network path field I put (\\myusername\desktopfiles) . I test and get Network connection failed.
note: Under network user name I put in my wireless network and password info.
Am I filling these forms out correctly?

FYI. I keep getting network connection failed after every test.

Similar Messages

Can't set up a network folder with a Hp laserjet M400

I'm trying to set up a network folder on my TimeCapsule so the scannner sends them there right away, I can't get the scanner to find the folder i've created. it just say "can't find the remote server". Any suggestions?

Is the scanner setup on a network connection?
Are all the names in the TC SMB compatible.. ie Short, no spaces and pure alphanumeric.
Any device not using AFP protocol will find Apple names.. long, spaces and strange characters difficult.

Setting up a Network folder so that I can scan from my HP 8600 printer

The HP instructions show the likely address for a windows Network folder but say go to the operating system instructions for a Mac. There is nothing on the HP site that gives me a clue as to the folder address. I cannot find a way to get an address for a folder. I created a folder titled " HP Scan " on my Mac Desktop and turned on sharing. I have tried several possible addresses but nothing works. I am connected to a small network via a new Apple Airport Extreme. There are only three things on the network, my Macbook Air, a smart TV and the HP 8600 printer.
Any help appreciated.

You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

Set Pasword in any folder through java (HELP NEEDED)

hi i want know it is possibel in java i m set password in any folder of my windows if it is so reply me soon .
i m waiting for reply

In java only - no.
If there is a command line tool that does it then you can use Runtime.exec() with an OS specific command. Presumably you are talking about windows so you might look in the appropriate resource kit. That is probably the most likely location for a command. But it could be somewhere else too.
If you can't find a command then you would have to use JNI.

DBACOCKPIT job error when running backup job to LAN network folder

Hello all
I have set up a network location through MSSQL Server Management Studio from
Server Objects -> Backup devices
and using SQL Server Managemnt Studio i can backup Full or Log to that network locaion.
When in SAP using DBACOCKPIT i can see the backup device which i defined in the SQL but when i run a job to backup FULL or LOG then i get the following error :
SQL Job information   ******************************
Jobname:    SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-095438]
Type:       TSQL
DB-Name:    GDW
For Run:    20110725 09:54:38
Job history information *****************************
Stepname:   CCMS-step 1
Command:    declare @exeStmt nvarchar(2000) exec gdw.sap_backup_databases @dbList=
            "master,msdb,GDW",@r3Db="GDW",@bDev="@FisticFULL",@expDays= 27,@jobNam
            e= "SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-09543
            8]",@bkupChecksum="N",@bkupCompress="N",@bkupType="F",@nativeBkup="N",
            @exeDate = "20110725095438",@bkupSim = "N",@format = 0,@init = 0,@bkup
            Db = "master",@unload = 0,@exeStmt = @exeStmt OUTPUT
Status:     (failure)
Message:    2528
Severity:                                                                                15
Duration:   0 hours(s) 0 min(s) 0 sec(s)
Last msg:   Executed as user: NT AUTHORITY\SYSTEM. Must declare the scalar variabl
            e "@FisticFULL". [SQLSTATE 42000] (Error 137) Incorrect syntax near t
            he keyword 'with'. If this statement is a common table expression, an
            xmlnamespaces clause or a change tracking context clause, the previous
             statement must be terminated with a semicolon. [SQLSTATE 42000] (Erro
            r 319) DBCC execution completed. If DBCC printed error messages, cont
            act your system administrator. [SQLSTATE 01000] (Error 2528). The ste
            p failed.
                    <----
End of Job Step History -
>
Job history information *****************************
any ideas?
thx in advance

Hello Marcus
I went to the link which you mentioned and there is nothing mentioned about hot to give rights to the user NTAUTHORITY\SYSTEM in order to do network backup.
I have done the following:
at server A which i my backup server i have a folder which i have it shared with full permissions for everyone.
At the SECURITY there is also full rights for everyone and for local admins.
From Server B i went to services and i stoped the SQL SERVER service and i set it up to log on with a user which has Administrator rights in the DOMAIN.
From server B i logged on with administrator and i defined at the SQL Server Management Studio at Server Objects -> Backup devices a new backup device with the network path.
The thing is that i have to go with windows explorer to the network location of where i want to do backup in order to put my domain username and password and after i can run the backup by the SQL Server Management Studio.
Do you know where do i need to give authority to NTAUTHORITY\SYSTEM in order for my backup to work from the SAP - DBACOCKPIT?
thx in advance.

Computer won't connect to printer through network. How do I set up the fax as well?

I'm new here and just beyond frustrated with trying to get this to work for my office.
My other printer wont work through USB since my computer will give me a warning throughout the day that the USB is corrupted. So anyways, I got a new printer and I'm trying to connect to it through the office network. My iPhone prints through it. My computers operating system is Windows 7 64 Bit.
My printer is HP Officejet Pro 8600 all in one
I want to connect to it from the network and I want to set up the fax. When I plug the line into the printer then the ext phone line into my phone my phone doesn't work.
I'm confused! Someone help! Please!!!!!
This question was solved.
View Solution.

Hi ahagereo,
Follow the steps in the document below to connect printer to your network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02886889
Fax: Make sure you have the phone line plugged into the line 1 port on the back of the printer.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpful

To whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

Where is the hyphen (-) on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck!

Do I have to set up the 5Ghz wireless band network or is it automatic?

I'm hoping someone can give me advice on how I should best proceed.....
I have an old (7 years) Belkin 802.11g F1PI241EGau 'gateway' that was provided by my ISP when I switched over to their service in February 2006, which I use to access the Internet via ADSL. I also have a 500 GB 802.11n Time Capsule Model A1302 which is connected to the Belkin via an Ethernet cable. Until last week my network also consisted of 2 x 802.11g AirPort Expresses that I used to extend the range of my network throughout my house. Getting any of the devices to achieve reasonable 'reach' is challenging because the house is on three levels, has double brick walls and steel-reinforced concrete floors.
Last week I bought an 802.11n AirPort Express and, simultaneously, one of my 802.11g AirPort Expresses 'died' when I tried to re-configure my network to add the 802.11n AX to it.
I have read that the range of the 802.11n devices is much greater than 802.11g. I decided to 'forget' my remaining 802.11g AirPort Express and see if my network would work with just the TIme Capsule and the new AirPort Express (both 802.11n). It does. The signal to my Apple TV is now only 3 bars, not 5, but it doesn't seem to affect its functionality.
As both the Time Capsule and the new AirPort Express are 802.11n they are both capable of functioning on the 5GHz band. Is there an advantage to this? What should I do in AirPort Express to 'turn on' the 5GHz band?
Can the 5GHz band have the same wireless network name as the 2.4GHz band?
Apart from the Apple TV, we have two iPads (version 3), one iPhone 3GS, one iPhone 5 and a MacBook (late 2008 aluminium unibody) as 'clients' on the wireless network.
Lastly, when I set up my network I set the Time Capsule to 'Create a Network' but it is in 'Bridge' mode to avoid double NAT problems with the Belkin gateway. The Airport Express is set to 'Join a Network'.
If someone can tell me whether there is a better way to setup my network I would be very grateful.
Cheers
Tricia

Bob said:
"Nothing....if you have the simultaneous dual band version of the AirPort Express. It is already providing both a 2.4 GHz and 5 GHz signal"
I agree that "nothing" should be done but...
FWIW: Using Airport Utility 6.3.2 I get the following options for my Airport Express 1st Generation. There is a similar option for Airport Utility 5.6.1 under the "Radio Mode" pull-down. Using Wi-Fi Explorer ($3 on the App Store) I see that only a 2.4GHz signal is available even when standing directly next to it (vs both a 2.4 GHz and 5GHz signal from my Airport Extreme 802.11ac)
Point being that the Airport Express(n) does not appear to provide both 2.4 and 5 at the same time.
This Airport Express (n) is configured for a "roaming" network, meaning it is connected via ethernet back to the cable modem which also has the Airport Extreme (ac) connected via ethernet.
As an aside, and since I walked all the way over to the barn to check this out, my MacPro appears to still be using the Airport Extreme for its connection even though Wi-Fi Explorer shows a much weaker signal. I am in the barn now. The Airport Express is the top line in the graph which when at the house, disappears on occasion although it is always accessible via Airport Utility. (The Airport Express(n) is the third in the list)
I am using Airport Utility 6.3 which shows that the Airport Extreme (ac) is the AP my Mac is running through.
My MacPro is the third Mac Address in this list 70:56:...
Interesting too, now that I am in the Barn, both Airport Utility applications do NOT have access to the Airport Express (n) even though Wi-Fi Explorer continues to show a strong signal from that system. (BTW, I also have 4 bars of wireless in the menu bar) (FWIW: I also quit and restarted Airport Utility) Based on further information below, it appears that my MacPro is NOT switching to a 2.4GHz network.
As an experiment, I turned off my wireless on the MacBook and turned it back on again. Airport Utility now shows me connected to the Airport Express(n) in the barn.
Here is Wi-Fi Explorer as I return to the house (approximately 125ft) Note the colors have been reallocated and don't match the previous screenshots. The list has also changed.
At this point, my menubar on the MacPro usually shows 2 bars but often rises to 4. However, it is clear my MacPro is still connected to the Airport Express in the barn because response is horrid and Airport Utility still shows that AP is servicing my MacPro. (I cannot show that screen shot since it is a popup that disappears when I move the cursor.)
To switch back to the Airport Extreme (ac), I have to shut the wireless on my Mac off and turn it back on again.
I assume that I am connected to the 5GHz subnet since Airport Utility shows my data rate is 450Mps.
Something I had noticed until now, it also shows that my PHY is 802.11a/n.
This brings up several questions, which I should post somewhere else since my only purpose here was to suggest that an Airport Express (n) does NOT broadcast in both wireless ranges at the same time.

Apple TV cannot see my computer even though I have verified that both are set to the same home sharing network. I can see my music and Netflix but not photos.

Applw TV cannot "see" my computer even though I have verified that both are set to the same home sharing account. The router works OK as Netflix comes through as does access to music.

Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Homesharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes? I want them still on my iTunes as they are only young (8 and 10)? Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes? For example if they want to purchase an App will it still go through my account even if they use their ipod?

How to delete the photos in network folder while deleting photos in iPhoto?

Hi,
How to delete the photos in network folder while deleting photos in iPhoto?
I have emptied the iPhoto Trash but the photos in network folder are still not deleted.
In iPhoto Preferences, Advance, Importing, I have UNCHECKED "Copy Items to iPhoto Library."
http://img.photobucket.com/albums/v432/philipcs/Screenshot2009-10-26at120221AM.p ng
Please help. Thanks.

iPhoto is a relational database management program and manages only items that it controls - items within its library - it does not and will not do anything with any photo that is not in the library except to delete photos from cameras after import - and this is not recommended
You are running a referenced library and it is not recommended - it makes deleting photos more difficult as you are seeing, it makes importing photos more difficult and it makes replacing or upgrading hardware much more difficult
LN

Is there a way to open the /dev/ folder through Finder?

Is there a way to open the /dev/ folder through Finder?
I already have show all files on but it still doesnt show unless you use Terminal.

Joaquin684 wrote:
I need to acess the root_device for testing.
Testing what? Anything in /dev is entirely foreign to the Finder. Stay in Terminal for that stuff.

Setting up the Network Folder through the EWS.

Similar Messages

Maybe you are looking for