Setting Up Time Capsule Via Ethernet Cable only no wireless involved.

I've just got TC to act just as a hard drive for my PowerBook(its got all the latest softwear)
It seams like all the setup details are in relation to a wireless net works. I don't want it to have anything to do with my wireless net work, that sounds like a accident waiting to happen.
All I want to do is copy my Itunes library on to it via a ethernet cable. I was assured I would be able to do this very easily at the Apple store, well after they stopped trying to sell me a new computer that is.
Any advise would be greatly appreciated, as it just sate there with a flashing amber light on it now.
there was me expecting/hoping it would be as easy as plugging in a new Ipod.
Cheers ..

I also have my time capsule connected via ethernet cable to my i-Mac the ethernet cable from my dsl modem goes into the WAN port. The gurus on the site may correct me but I don't think that you will ever get a green light unless your internet is plugged into the WAN port. Even with the flashing amber light the time capsule should function as a backup drive if everything else is setup right.

Similar Messages

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

Connecting to Time Capsule via Ethernet

Hi,
I'm working on a Tiger OS and I cannot connect to my time capsule. I followed instructions in the manual, but I simply do not see Time Capsule on my desktop, and there is very little info in the manual.
I am working off of ethernet, not airport, and would prefer to used ethernet for the moment. I have it connected via LAN port to my macbook pro. There's only one ethernet port on my computer. Does anyone have any advice? I know about about Macs, but dont have much experience with network specs.
I simply need to archive data, but I cannot see Time Capsule on my desktop. Time Capsule is connected just fine to my modem, but now how do I connect to my computer? I've tried to unplug ethernet from my computer, and into the LAN port on my capsule, but to no avail.
I am absolutely clueless as to how I can use this machine at this point??
Thanks much.

Jean,
You probably don't have the Network Preferences set correctly.
Connecting The Time Capsule Via Ethernet
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>).
Connect the other end to your Macs ethernet port.
Open Network Preferences.
At the top change "Location:" to "Ethernet Connection".
In the list on the left "Ethernet" should be at the top of the list. (If not use the Action Menu (gear button) at the bottom to "Set Service Order".)
Click "Apply" in the lower right.
Give it a moment to acquire an IP address from the TC.
You should now be connected.
Now begin your initial backup.
Now that you are reconnected to the TC, you should still have internet access during the backup.
Let us know if this was helpful. Next time start a new thread, you're more likely to get helpful responses that way.
Cheers!

Connecting Macbook with Time Capsule via Ethernet

Hello!
I have a time capsule and a macbook. I used to backup my data with the time capsule via ethernet. Now there was an update to airport I guess and since then the menue to configure the time capsule looks different and now I have trouble finding out how to set up the connection between macbook and time capsule via ethernet. I dont want the WLAN to be used so I want the ethernet be the connecting part of both esp because i want to backup lots of data now but Im missing the setting that said use use time capsule via ethernet. I just dont know how to set it up now.
I have the ethernet cable in the very left ethernet slot next to the reset button of the time capsule and its also plugged in to the ethernet slot on the macbook. But what are the settings for this connection.
Can someone help please otherwise i think my 23GB backup will take 3 days...
Thanks in advance
Dine

Open the network preferences and make sure the ethernet is getting an IP from the TC.. you do not need to change any settings .. all you need is network connection.. if the ethernet is working just turn off airport for the time the backup is going on. Once you turn off airport in the MBP the connection will be forced to ethernet. You can do it more correctly by rearranging the order of preference for network connection.. but for now.. just turn off airport.

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Connecting Airport Extreme N to Time Capsule via ethernet to extend wireles

Hi, I currently have 2 Airport Extreme N and a Time capsule and would like to connect all three together. I am planning to use the time Capsule as the router and then use the other airport extreme to extend the wireless network. I am planning to have ethernet connection between the three devices ie Airport extreme N (A) is connected to time capsule via ethernet and airport extreme N (B) is connected to time capsule via another ethernet.
I have tried the Extend Wireless network option to connect them, but that seems to generate so much traffic between the airport extreme N and the time capsule that the network is not usable. I have also tried using WDS but that didn't seem to work.
The three wireless networks have some areas of overlap but the signal is weak which is why i prefer to link them up with ethernet.
What is the best wall to configure them? should I set them up so that they're each creating a wireless network but with the same name? Or is there a better solution? Thanks!

It seems to me the easiest way is to have the Airport Extreme connect to internet using Ethernet, using DHCP and the Connection sharing in off (bridge mode) and then create a new wireless network with the same name... Is that correct? I have previously ran the apple wizard and it did something weird with the network and then both the time capsule and the airport extreme are serving out IP address and both of them have the same IP address 10.0.1.1. which then messes up everything...
Any ideas? thanks!

I want to transfer files from a Win XP PC to a Mac using Time Capsule via Ethernet connection. Is this possible?

I want to transfer files from a Win XP PC to a Mac using Time Capsule via Ethernet connection. Is this possible?

Sure.. the PC connects by SMB.. the Mac connects by AFP or SMB..
But you can simply share SMB directly from the Mac.. there is no need to copy files through the TC. Go to system preference, sharing, and turn on SMB for the folder you want to share files to / from on the Mac.
Make sure you have a common username and password also helps.
If you have a TC already can you copy files to it via the windows machine??

Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
Any help would be greatly appreciated.

Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule xxxxxx
AirPort Utility will suggest a setup, which you want to ignore
Instead, click the Other Options button
Select the Create a new wireless network setting and click Next
In the Network Name box, enter the exact name of your Archer wireless network
In the Base Station name box, enter a name that you want to use for the Time Capsule device
Uncheck the box to use a single password
In the Network Password box, enter the password for the Archer wireless network
Verify on the next line
In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
Verify on the next line
Click Next and wait while the AirPort Utility creates a network
Ignore the step about unplugging the modem and click Next
Do not enable the Guest Network option and click Next
Wait while the network is being set up. When you see the message that the wireless network is available, click Done
The Time Capsule will now appear in AirPort Utility with a blinking amber light
Click on the Time Capsule icon, and then click on Edit in the next small box that appears
Click the Network tab at the top of the window
Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
Click Update at the lower right and click Continue
Wait a full minute for the Time Capsule to restart and you should have a green light
It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption.

How can I set my time capsule to back-up only once a day?

How can I set my time capsule to only back-up once a day. It appears to be backing up several times a day. Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.

tdenny2 wrote:
Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.
Then something is wrong. Changing the schedule will only deal with the symptom (and give up one of the better features of Time Machine's usually quick and unobtrusive hourly backups).
See if the size of the backups makes sense, considering what you've changed since the previous one. If it seems much too large, that may be the problem. See #D4 in Time Machine - Troubleshooting for some common culprits and ways to see just what's going on.
If the sizes seem reasonable, see #D2 in the same link for things that can cause extra-slow backups.

Connecting to Time Capsule via Ethernet AND wireless

I have connectivity through an Ethernet network to which my Time Capsule is connected. I connect wireless to TC, but another Mac which is out of wireless range -but still in the same Ethernet network,- cannot connect to TC via ethernet. Is there a way to have access to TC both wireless and via ethernet?
Thanks
Nilde

Hello Nadjia. Welcome to the Apple Discussions!
Is there a way to have access to TC both wireless and via ethernet?
Yes, the TC supports both wireless and Ethernet clients simultaneously. Let's double-check the Built-in Ethernet settings on the Mac that you are trying to connect via Ethernet.
System Preferences > Network > Show > Network Port Configurations
o Verify that a Built-in Ethernet option exists. If it does not, click "+" to create one. (Note: If you are unable to create a Built-in Ethernet configuration, the Ethernet card in your computer either doesn't exist or it is not recognized.)
o Verify that Built-in Ethernet is at the top of the list. If it isn't, you can drag it to the top.
Advanced > TCP/IP tab
o Configure IPv4: Using DHCP
o Configure IPv6: Off
Advanced > DNS tab
o Verify that your ISP's DNS server(s) appear. If they do not, click "+" add them.
Advanced > Proxies tab
o Configure Proxies: Manually
o Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
o Exclude simple hostnames (unchecked)
o Bypass proxy settings for these Hosts & Domains: <leave blank>
o Use Passive FTP Mode (PASV) (checked)
Ethernet tab
o Configure: Automatically

I set up time capsule and now can't connect wirelessly

I got home with my new Apple and Time Capsule last Friday and was unable to connect to the net. I called Cox cable and they came out and got me up and running. The yellow light on the Tine Capsule kept blinking but I was able to connect and thought it was just a glitch.
Today I added a printer and, after a few headaches, got it up and running. Then I tried to set up the automatic backup process and thought I was OK. Now, however I can't connect wirelessly at all. I keep getting the message "None of your preferred networks are available." I have a neighbor with a wireless network and it sees that, so something is going on. I also am able to connect directly to my modem and get connected. The yellow light is still blinking!
I have tried re-starting the computer, turning off both the modem and Time Capsule, but nothing works. I am beginning to think I have a defective Time Capsule but the store I got it from is two hours away, so if anyone can offer a suggestion, I would be most grateful.

I just went through the same deal. I'm not exactly sure how I did it, but I eventually got it to work, and even have Back to My Mac in play. For the next ten minutes, anyway.
So here's the deal. These are some of the things I did that you might try.
First, there is a big issue regarding how you presently connect to the internet - DSL modem? Cable modem? A dixie cup and a piece of thread? Time Capsule is both a router and a wireless base station, so whatver you're using now might be performing router duty as well, and screwing things up. I replaced my AT&T 2Wire device (modem, router, and wireless base station in one box) with a DSL modem. Oh, and when I was prompted, I assigned the public IP address for my broadband connection (the one that begins with 70.xxx.xxx.xxx) to the TIme Capsule, instead of having Time Capsule get one of those 192.xxx.x.xxx or 10.x.x.x IP addresses from DHCP.
The modem has to operate in "bridge mode." Whatever the heck that means.
Also, in configuring time capsule, I initially used an ethernet cable attached to a computer (in this case, my MacBook Pro). It seemed easier to get it going that way, and once it had managed to connect, it made it easier to get on just using the wireless connection.
When you're prompted, you want to create a new network, although it might be helpful to take it one step at a time and keep your present network up and running and let Time Capsule join that deploying - initially - just the wireless backup capability.
Oh, and regarding restarting all the hardware, I did that too. But with Time Capsule, if you're not already doing it, you should not just restart the device, but do a reset. On the back of the device if you look carefully toward the right you will see a little pinhole. Get a paper clip and depress the little button inside that little pinhole until the front light begins to blink rapidly. That resets Time Capsule and was the only way I could get the thing to bite at the beginning.
So much for Mac's just working. Although once they do . . . .

Help connecting 2TB Time Capsule to iMac via ethernet cable only

I have an iMac running OS X Version 10.9.3, and a 2 TB Time Capsule, which at our last residence I used both as my wireless router and Time Machine backup (via wi-fi). We recently moved and got Comcast, which provided us with a very, very fast router. As a result, I would like to start using the Time Capsule only as a Time Machine backup, preferably via an ethernet cable connection. I tried connecting the Time Capsule to the iMac via an ethernet cable with no joy. When I did, it seemed to bring back my old wireless network, which I don't want. Any help/advice would be greatly appreciated!

Is it something specific about the Comcast modem/router that makes it so I have to plug an ethernet cable into it too (as opposed to just running an ethernet cable directly from my iMac to the Time Capsule, which is what I assumed was possible and was hoping to do)?
Nothing specific about the Comcast modem/router, but definitely something specific about the Time Capsule in that it needs to connect to the Comcast modem/router over a wired connection to allow backups to occur over the Comcast wireless network. As we have said, the Time Capsule must connect to the Comcast modem/router using an Ethernet cable, as you see illustrated in the TC Setup Guide.
This solution doesn't really work, as our computer/TC is upstairs and the Comcast modem/router is downstairs.
Ethernet cabling can be run 300+ feet, or about 100 meters with virtually no signal loss, so you should be able to locate the Time Capsule anywhere that you want. My Time Capsule is located in a closet, about 60-70 feet away from the main router.
is there a way that I can use the TC as an upstairs wifi extender and still do my Time Machine back-ups wirelessly?
Yes. When the TC connects to the Comcast modem/router using an Ethernet connection, you could use the wireless capability of the TC to create a wireless network with the same wireless network name and password as the Comcast network. Then, you will have the same network upstairs and downstairs with much greater range.
You will be able to backup to the TC using wireless....or, if you prefer a much faster connection....connect an Ethernet cable from your Mac to one of the LAN <--> ports on the TC.
For example, let's say that you are making the first backup from your Mac to the TC when everything on the Mac is copied over to the TC. Typically, this might take 8-10 hours on average using wireless, but Ethernet would require only about 2-3 hours.
Once you have the first complete backup done, you could then perform subsequent backups over wireless, since these will only take a few minutes each time that the Mac backs up with only the changes that have occurred since the last backup.

How can i connect macbook pro to time capsule via ethernet

I just purchased a Time Capsule to backup my MacBook Pro. I tried to back up the files via wifi but it was taking forever. I tried connecting the Time Capsule to the MacBook via an ethernet cable but it won't recognize it. Any suggestions?

When you plug in by ethernet, make sure you plug into a LAN port on the TC... ie one marked.. <...>
Make sure the connectivity led goes on.. tiny light on the port itself.
On the MBP turn off wireless.
Make sure ethernet is set to auto .. check its status in network preferences.
Finally press and hold the reset button for 10sec to reset the TC.. that usually brings them back to life if it is acting up.
What OS on the MBP?? Lion and ML have issues finding the TC.

Can anyone access time machine backup files by connecting to time capsule by ethernet cable?

I operate an imac connected to a time capsule. It works great. My internet is connected to the time capsule with an ethernet cable and I access the internet on my imac using an ethernet cable connected to the time capsule. I can also connect to the time capsule using wireless.
A colleague of mine wants to connect to the internet and because of location issues the only convenient way is to let him connect to my time capsule using an ethernet cable. He can access the internet fine and he uses a windows PC. Now my question is, will he be able to access my time machine backup files if he connects to my time capsule using an ethernet cable? I have not given him my password.
Any help will be appreciated. I want to help him get online but I want to make sure he cannot access my time machine backup files.
Thanks

There are actually 3 passwords on the Time Capsule - assuming it has the same setup as my Airport Extreme Base Station.
One password for the WiFi connection.
One password to access setup of the device
One password for access to the storage drive - most people leave the check-box to just use the base-station setup password again.
And, as I said before, you also have the option to encrypt your TM backups. So even if somebody runs off with the device and breaks in to the disk, it will all be garbage without the TM password.
This is the screen as it is on my computer:
As you can see, to access my drive I have it set to use the device setup password.
Here is a screen shot of the other options:

Can't connect Time Capsule via Ethernet

I recently installed Montain Lion on a new hard drive, and want to use Migration Assistant to transfer my files and settings from a Time Machine backup on at Time Capsule. In the previous version of AirPort Utility you could change how your computer connected to a Time Capsule, and one of the options was via ethernet. In Mountain Lion this option is no longer available, and when I connect via an ethernet cable my computer doesn't seem to see the drive. Anyway to do this in Mountain Lion?

I can't get the AP TC to add on to an existing network in initial set up as , even though the option is available, the Airport Utility (6.3.2) doesn't seem to keep it selected, and wants to create a new network.
"Add" would be used for a wireless connection....and you indicate that you are using Ethernet to connect the existing modem/router and Time Capsule together....so the correct setup would be to create a new network using the exact same wireless network name and password as your existing network.
Connect an Ethernet cable from one of the LAN <--> ports on the current modem/router to the WAN "O" port on the Time Capsule.
Here, I am assuming that the TC will be located at least a room or two away from your main wireless router. If it is located any closer, there will likely be wireless interference issues between the two routers. The wired connection between the modem/router and Time Capsule must be maintained.
AirPort Utility will suggest a setup that looks somewhat like this.....except you will see a Time Capsule instead of an AirPort Express as illustrated below:
Network Name would be the name of your existing wireless networik
Base Station Name is a device name that you want to call your Time Capsule
Password is the wireless password of your existing wireless network
Verify confirms that password
Click Next and the setup utility will auto configure things for you in a minute or two
When you see the message indicating Setup Complete, click Done and you should have a green light on the TC.

Setting Up Time Capsule Via Ethernet Cable only no wireless involved.

Similar Messages

Maybe you are looking for