Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Similar Messages

  • Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

    Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

    There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

  • Time Capsule with (2) AirPort Express connection problem

    I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

    The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
    The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
    Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

  • Time Capsule with existing Airport Extreme--Help

    I just bought a new 20 inch iMac with a Time Capsule for home. I have an existing Airport Extreme and there are a number of peripherals (2 iBooks, Playstation 3) which feed off of this airport. What I want to do is make the Time Capsule accessible only to my new iMac and keep the other network intact. I disconnected my DSL from my Extreme and connected it to the Time Capsule. It works fine. My thought was then to run an ethernet line from the back of the TC to the Extreme. I did this, got a green reception signal on the ethernet from the TC, but am unable to make the Extreme work as it did before. I know I'm doing something wrong--possibly the config on the Extreme--but I'm clueless as to making this work. Any help would be appreciated.
    Thanks

    Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

  • How to set up time capsule with existing network that uses airport express/extreme

    I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

    I suggest to use your airport express to extend your wireless network that is created by your new time capsule

  • Using Time Capsule With Existing Airport Network

    Hi All,
    I already have an Airport connection and would like to setup TimeCapsule on that network. Do I need to plug in an ethernet cable? Will it conflict with my existing airport base station?
    Thanks in advance,
    Tim

    Hi All,
    I went through the setup on the Airport Utility but honestly I'm very confused as to how to set this up. It's being recognized by the Aiport utility but when I got to configure it, the airport utility says "Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)" I've connected it to my Ethernet port even though I thought I shouldn't have to and it still gives me this message. Thoughts?
    Thanks in advance!!
    Tim

  • Setting up time capsule with existing wireless router and another time capsule

    Hello,
    I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
    Is this true?? I find it hard to believe this issue hasn;t come up before.
    Thanks,
    Deborah

    Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
    Would I need to connect my time capsule directly to the router for first time set up?
    If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
    Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
    I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
    Thanks, I really appreciate your help!
    Deborah

  • Can I extend the range of my Time Capsule with an Airport Express?

    I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

    i think you have the same concern as mine....
    would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
    my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
    i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
    by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
    this is all in preparation to buy a new TC...... is my understanding correct?

  • HOW TO SET UP time capsule with time machine?

    I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?

    What part are you having problems with?  You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility).  Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.

  • How to set up time capsule with BT Infinity

    how to set up time capsule with BT Infinity

    The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
    Method is,
    1. Plug the TC WAN port into the BT supplied modem by ethernet.
    2. Plug the computer you are using for the setup into the TC by ethernet.
    3. Run the airport utility .. go to internet tab on the top menu..
    In the bottom option, Connection Sharing choose off (bridged mode)
    4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
    5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
    6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
    This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
    If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

  • Time capsule with older Airport

    I just got Time Capsule wireless network up and running, and my newer ibook 2 GHz Intel Core 2 Duo with Leopard connects just fine to the network, which I established using that ibook.
    But, I also have an older ibook G3 with wireless Airport card, and would like it to connect as well for use around the house. If finds the networks but says "The password you entered is not correct for the selected Airport network." I am certain the password is the same and correct.
    Will this older ibook and Airport card connect to Time Capsule or are the frequencies somehow incompatible?
    Thanks.

    ...my newer ibook 2 GHz Intel Core 2 Duo...
    That is a MacBook or MacBook Pro... not an iBook.
    What type of wireless encryption are you using? An iBook G3 can NOT connect to a WPA2 protected network.
    The iBook G3 can connect to a WPA protected network IF the iBook is running 10.3 or beyond.
    The iBook G3 can not connect if your Time Capsule is configured to use 802.11n only.
    BTW, the Multicast rate has absolutely nothing to do with it. This is the minimum rate at which the base station should drop the wireless connection.

  • Time Capsule vs. Airport Express via Ethernet

    Air;ort Express is connected to a DSL modem with an Ethernet cable. Time Machine is in turn connected directly to my MacBook Pro, again by Ethernet. Obviously something here is wrong, since the Time Machine persist in showing a blinking yellow light.
    I think that this used to work but no longer. How did I sdrew up?

    Does that in turn suggest that I should connect the Time Capsule directly to Airport Express?
    when possible always run ethernet.. it is fast and reliable.. only when there is no other choice use wireless to link routers.. it is always poor.
    You can use wireless from laptop to the Express or the TC.. that is fine.. but keep the wireless usage to something close and just once.. no double hop over wireless.
    If you have ethernet there, use it.
    Simply put the TC in bridge mode.. that is router bridge.
    And make sure you are creating a wireless network on the TC.. same name and same security setting and password as the Express.. then the laptop can connect to whichever it is nearest to.
    If you need complete diagrams or screenshots just ask.
    life is a lot more complicated than it was when I bought my first 128K Mac in 1984.
    Not always.. networking with modems and telephone wires was not always fun.. !!
    You forget what it was like 30years ago.. !!
    I started about that time but could never afford Macs. When I think of all the money I spent on computer gear over the years it is frightening.
    Instructions here for roaming network since Apple has none up to date.
    Setting Up Roaming - New AirPort Extremes and Utility

  • Force 802.11ac Connection To Time Capsule Rather Than Airport Express

    I have a new Time Capsule and a new retina Macbook Pro, both with 802.11ac.
    The Time Capsule is in my main room and my rMBP is in my offce.  In between my office is the kitchen which has an Airport Express.  The reason I have the Airport Express in the kitchen is because some devices such as iPads and iPhones have a hard time connecting to the Time Capsule, so the Airport Express extends the network.
    The rMBP has no such problems.  However, because the AE is closer, it stays connected to the AE rather than the TC.  This of course means I don't get any 802.11ac advantages.
    How can I force the rMBP to connect to the TC and ignore the AE?

    LaPastenague had good advice for you. All that you need to do is use AirPort Utility to enable the option to assign a different name to the 5 GHz band on the Time Capsule.
    Then, move your MBP close to the Time Capsule and "point" your MBP to that network.  Then, check to insure that you have the MBP configured to connect to the 5 GHz network first in the connection priority list.
    Open System Preferences (gear icon on the dock)
    Open Network
    Click on WiFi on the left
    Click Advanced at the lower right
    Make sure that the 5 GHz network name is at the top of the connection order list. If it's not, drag it there
    Make sure that there is a check mark in the box next to "Remember networks this computer has joined"
    No other boxes should be checked
    Click OK
    Click Apply
    Close the windows
    Note.....As you know, 5 GHz  signals are much weaker than 2.4 GHz signals, so 5 GHz works best when wireless devices are in the same room, close proximity, or have line of sight with each other.  If there are several walls or other obstructions in the signal path between the Time Capsule and MBP, the Mac may not connect at high speeds.

  • I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

    Plenty of suggestions.. only you can find out which one is correct.
    What model AE? What firmware?
    Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
    Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
    Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
    Fix the wireless channels.. so it doesn't flip flop like a dying fish.
    There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1  although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
    Lastly is it stable if the distance is 3M direct line of sight?
    If not then get a high power wireless AP and use that instead.

  • I have a Airport Extreme 802.11n and I can't find the disc to install it... how can I install without the disc?

    I have a Airport Extreme - 802.11n  and I'm trying to install it -- but I don't have the disc.  Any help would be so appreciated.

    You don't need the disk, you can download and install the application that you need.
    If you are using Windows 7, the link for the software is just below.  Otherwise, post back to let us know what operating system your computer is using.
    AirPort Utility 5.6.1 for Windows - Apple

Maybe you are looking for

  • Starting Windows 7 Backup : Server execution failed(0x80080005) ????

    A MSFT asked me to post here and here is a link to my original post and some troubleshooting already done. http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/8669451c-772e-4bb4-91b0-9b089bf5c2cd/ My original first post in that for

  • Wildcards in Bash

    Hello, I use the default terminal on Mac OS X 10.4.8, which I'm lead to believe is Bash. In Bash, I should be able to use some rather advanced, and simple, wildcard expressions. However, using something as simple as: ls -a .0* gives the response "ls:

  • Cisco WLC 5508 - NPS Radius

    Cisco WLC 5508 Software Version: 7.4.100.0 Windows Server 2008R2 I've got everything setup on the Windows Server 2008 side of things (certificates, radius clients, etc) I added the radius server on the WLC, and configured a new WLAN to use it. Both a

  • Add Datestamp in Task Notes ?

    Is there already a key combination (shortcut) that allows for adding a datestamp to Tasks>Notes ? I use Outlook to sync my tasks to the BB.  I already have a datestamp app that allows adding datestamps in Outlook, so now I am looking for the same thi

  • RBAPI/RFM for COPA Report

    HI!   Can anybody help in providing Performance oriented <b>RFM made for COPA Report</b>. I am using a Third Party Product to Generate COPA Report and Performance is the main aim. Thanks in Advance