Setting up time capsule with existing wireless router and another time capsule

Hello,
I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
Is this true?? I find it hard to believe this issue hasn;t come up before.
Thanks,
Deborah

Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
Would I need to connect my time capsule directly to the router for first time set up?
If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
Thanks, I really appreciate your help!
Deborah

Similar Messages

Using Time Capsule with existing wireless router

I am thinking about getting a TC, but I wanted to know if the following configuration would work:
DSL modem to existing wireless B router. Then have the TC recieve internet from the existing wireless router.
Basically I want to put the old router in the basement where the only wiring is, but put the TC upstairs on my desk so I can connect the printer to it.
Thanks!

Although, you can join an existing network using a Time Capsule as a wireless client, it’s recommended that the existing network is an 802.11n network.

How to connect time capsule to existing wireless router

Hi
I am struggling to set up my time capsule is it possible to connect it to my existing wireless router or does the time capsule have to replace it as I have tried to do that but I cannot get a connection or signal to the WAN port?
I have the set up instructions but its not helping I am a complete novice at this.
Any help or links much appreciated

Yes you can.
Just plug the TC into one of the Ethernet ports on your router. WAN port on the TC.
Before you do that, set the TC up to be in 'bridge mode' in AirPort Utility.

Setting up a Time Capsule with Verizon Wireless Router

I am trying to set up my TC with a Verizon Wiresless Router. I wish to use the TC's wiresless signal and shut off the Verizon signal (can do). I plugged the TC via ethernet, into port 2 on the verizon router and in the WAN connection on the TC. I am getting a blinking amber light. No idea where to go, I cannot access the TC via my iMac and the ethernet port on the iMac doesn't work (broken since new!) Help much appreciated. I will want to use the TC to back up the iMac and two macbooks. THANK YOU!

Ok, I found the TC on the iMac after restarting the airport utility!

Time capsule with Belkin wireless router

I have recently bought a Time Capsule (1TB) and have it set up with my existing Belkin router. This is a F5D9630-4 model which is only G+ MIMO so I've disabled the wireless capability on that and use the TC for wireless. At the moment the TC is in bridge mode allowing the Belkin to handle the DCHP stuff. Everything seems to work fine - I have a PC laptop and iPhone as well as the Mac and all communicate and connect to the internet with no problems.
However, I've just signed up for a MobileMe trial and hoped to try Back to My Mac. Unfortunately, I get a message saying it won't work because "Back to My Mac requires a router that supports NAT Port Mapping Protocol (NAT-PMP) or Universal Plug and Play (UPnP) in order to share services." What's strange is that both are enabled on my Belkin. Should I disable them and set up NAT on the TC or am I missing something else? Should it be the Belkin that is in bridge mode and the TC that handles the DCHP?
Anyone got any other ideas? I find it all very confusing having the two devices - if only apple did a TC with built in modem!

I have a similar set up and it works fine. Make sure your router is up to date and reboot it after enabling the UPNP option. I do get the green light at home with the similar setup.
At work, with the same exact setup, I don't get the green light, only the yellow one like you do. It does work anyway... so have you actually tried it from outside your network?

Setting up Time Capsule as primary wireless router and enabling port forwarding

I am attempting to setup my Time Capsule as the primary router on my wireless network. I have an Actiontec Verizon FIOS router that I am connecting the TC to using ethernet, and I was then going to turn off the wireless function on the Verizon router so that the TC will be the only wireless router. I am not exactly sure how to go about this, and I also have to connect a wireless device to the TC that requires a static IP address and port forwarding enabled so that I can access from my iPhone. I am completely lost on how to do this, any help will be greatly appreciated.

Unless Verizon has made a major change in the last few days, you will not be able to use the TC as the primary router......simply because it is not possible to configure the Verizon router to act as a simple modem......which is what it must do if you want to have the TC act as the primary router on your network.
As LaPastenague has explained. turning off the wireless on the Verizon modem/router will not make it a modem. It will still be a wired modem/router in charge of the network, not allowing the Time Capsule to take over the role of main router for the network.
But, let's assume that I am wrong. Please check with Verizon support and ask them........
1) If it is somehow now possible to configure their modem/router to act as a simple bridge mode modem. If they say that this is not possible (or they will not support this).....
2) Ask them if they can provide you with a simple, bridge mode modem......instead of the modem/router that you have now. A simple modem will have only one Ethernet port, and it will not offer any type of routing or wireless service at all.)

Using Time Capsule with 2nd wireless router

Hi,
I have been trying to extend my time capsule and have had limited luck.
I have my time capsule in my office which is a separate building behind my house. The cable internet service runs to this location. I purchased an airport express and put that in the house so we would have wireless access in the house. I have tried every location available in the house and it is still really slow. (I get a transmit rate of 270 in the office. In the house it ranges from 7 to 20).
So, I was thinking maybe I could run a 30ft or so ethernet cable from the time capsule to another wireless n router in the house. So when out in the office I would connect to the TC and in the house to the Linksys (or whatever I buy). My question: would this even work? Can I have 2 wireless routers and would the Linksys work if it was connected via ethernet to the timecapsule vs. being connected directly to the cable modem?
Alternatively, can you connect 2 cable modems to one incoming cable line if I could find another cable modem somewhere?

Sure, happy to help.
Temporarily, move the Express close to your computer and connect an ethernet cable from your computer to the Express for the configuration.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your AirPort Express and click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode...set to Create a wireless network
Wireless Network Name...Exact same name as your Time Capsule network
Radio Mode....802.11n (802.11b/g compatible) would be a good choice
Wireless Channel...Automatic
Wireless Security....Exact same setting as your Time Capsule network
Wireless Password....Exact same setting as your Time Capsule network
Wireless
Click the Internet icon
Look for the setting for Connection Sharing at the bottom of the page and set this to "Off (Bridge Mode)"
Click Update at the lower right of the window and close AirPort Utility immediately and disconnect the ethernet cable as soon as you see the message that your settings have been stored.
You can now move the Express to the location you need and connect the ethernet cable and power it up.

How do I use Time Capsule as a wireless router and turn my current one into modem only

I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router.
Question #1
How do I use my Time Capsule as a router?
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house. I am assuming this is possible it is I just dont know how to go about doing this myslef without guidance, and the Airport Installer is confusing to me.
Thanks!

Question #1
How do I use my Time Capsule as a router?
Connect an Ethernet cable from one of the LAN <-> ports on your modem/router to the WAN port (circle of dots icon) on the Time Capsule.
Open AirPort Utility and click Continue to follow the guided setup to configure the Time Capsule to "create a wireless network". Select the "Bridge Mode" option when it appears during the setup. (AirPort Utility will normally do this for you)
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Yes
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
We prefer not to guess at things, but since we do not know the make and model number of your modem/router, and this is an Apple support area, we have little choice.
In general, you would enter the default IP address of the device into your browser to bring up the configuration pages (check your documentatio on the modem/router for this information, or it may be on the back or bottom of the device. An example of a default IP address is something like 192.168.1.254
There will be a wireless settings page that will allow you turn off the wireless function of the device.
If you acquired the modem/router from your service provider, they should be able to tell you how to do this as well, or if you check the manufacturer's website, they will likely have a support area for questions like this.
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house.
You will need to log on to the Time Capsule wireless network from each device and enter the password to connect. Most computers will "remember" the setting so that you do not have to enter the password each time that you connect.

Using Time Capsule as a 'wireless' router and backup using Time Machine

I have a question about backup speed on my 1 TB Time Capsule. I purchased a Time Capsule about a year ago and have an imacg5 and two Mac laptops that I setup to use the wireless router capability and as the backup drive for all three computers.
I was experiencing a problem in that the backups from the imacg5 were never completing even though the Time Machine window said it was only backing up several MBs. In order to 'fix' the problem I finally 'erased' all of the backup files on the Time Capsule using Airport Utility. I had also run Disk Utility on all of the drives to verify and fix any problems.
When I initialized the wireless connections and initiated backups I connected to the imacg5 to the Time Capsule with an ethernet connection as well as via Airport and began 'backing up' my laptops, then started by backing up individually, various disks on my imacg5.
The laptops have rather small disks and backed up rather quickly. The imacg5 has hundreds of GB of data spread across several disks. I had decided to 'backup' the disks individually in case that had been the cause of my original problem.
My systems disk, Macintosh HD, backed up about 110 GB at the rate of 8 GBs per hour. I was encouraged.
My next 'data' disk, LaCie 320 #1, backed up about 209 GB at the rate of 2 GBs per hour. I was confused. This 'backup' took several days to complete. Once it completed, Time Machine has run about every hour as expected and completes the backup in about 3 minutes.
I still have two more disks on the imacg5 to backup. Does anyone have any idea what rate I should expect or should I just add the drives and let it take its course?

I say just do it!
When connected via ethernet I turn off the airport connection on the computer. I found that frequently my mom's macbook pro would choose the wireless connection to her Time Capsule rather than the ehternet connection to do the back up. This was slower than via the ethernet.

Can I use Time Capsule with Broadband wireless router that also feeds a PC?

I have just bought Time Capsule but am afraid to open it in case it stops the wireless broadband connection to my Mac and a PC in another room. Any advice?

There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

HT1178 How do I set-up my Time Capsule to work with my existing Wireless Router?

The existing wireless router is my connection to the Internet and I would like to keep it that way. I really want the TC to fuction as an external Hard Drive/Server, Backup Disc! The TC is where all my Music and Photos are located together with my Backups!
I have tried different configurations and I get it to work for a wile, but after a few minutes it will disappear from my Air Port Utility, a rescan will not bring it back, but if I unplug and then plug it back in it will reappear. However if the TC shows in Air Port Utility or not the TC still shows up on my Desktop.
What Settings should I use in Air Port Utility, Should the Ethernet Cable be plugged into Ethernet or LAN Port?
My Current Settings are:
Ethernet Cable: Connected to the ETHERNET PORT
AirPor Tab:
Wireless Mode: OFF
Connect Using: ETHERNET
Internet Tab: Internet Connection
Connect Using: ETHERNET
Connection Sharing: OFF (BRIDGE MODE)
TCP/IP:
Configure IPv4: USING DHCP

I am Running OS 10.5.8 on a PowerBook G4.
Below you will see the Log (IP Address, AirPort ID, Eternet ID, Subnet Mask, Router Address, DNS Server Info has been removed).
I had the TC was originally set-up connected to a DLS Modem, all worked fine Backups over TM all was ok, but then the Modem died. (I upgraded to a Wireless Router). I did have it set up, but I nolonger know the settings, I wanted to do a backup with TM, which had not been done for a long time (6 months)
I tried to backup, but either it was not working or was taking sooooo long, that I decided to do the Backup over Ethernet (still took the hole day for 8.5 GB). I had read that I nedded to chang my setting to be able to Backup with Ethernet. Did not Save the previous settings hence my problem!
Log:
Nov 21 08:23:26
Severity:5
Initialized (firmware 7.6.1).
Nov 21 08:23:31
Severity:3
No Address for NTP server time.apple.com.
Nov 21 08:23:31
Severity:5
Internet configuration leased [IPv4] -- host <0> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 08:23:33
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 08:23:46
Severity:3
No Address for NTP server time.apple.com.
Nov 21 08:24:01
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +7 seconds).
Nov 21 08:28:05
Severity:5
Connection accepted from [%bridge0]:49362.
Nov 21 08:28:06
Severity:5
Connection accepted from [%bridge0]:49363.
Nov 21 08:28:06
Severity:5
Connection accepted from [%bridge0]:49364.
Nov 21 09:24:53
Severity:5
Initialized (firmware 7.6.1).
Nov 21 09:24:57
Severity:3
No Address for NTP server time.apple.com.
Nov 21 09:24:59
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 09:25:00
Severity:5
Internet configuration leased [IPv4] -- host <> gateway <> dns <> wins <> lease <1814400> domain <Speedport_W723_V_Typ
Nov 21 09:25:02
Severity:5
Connection accepted from [%bridge0]:49884.
Nov 21 09:25:03
Severity:5
Connection accepted from [%bridge0]:49885.
Nov 21 09:25:03
Severity:5
Connection accepted from [%bridge0]:49886.
Nov 21 09:25:12
Severity:3
No Address for NTP server time.apple.com.
Nov 21 09:25:28
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +7 seconds).

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Do you have to set up AE inBridge mode with existing wireless modem router?

Hi
I've just bought the AE and Apple TV. My plan was to basically use my existing Netgear wireless modem router for the internet only and set up the AE as the wireless router. I also bought the AE to boost the strength, print wirelessly and I thought it might work better with the Apple TV. The other things I use on my home network are ipad, iphone 4, HP DV6 Notebook, Toshiba Notebook and PS3.
I've plugged the Netgear into the AE with an Ethernet cable. I initially started with the "replace existing access point with AE", as I thought I was replacing the Netgear with the AE. This option left me with internet working and a blinking amber light on the AE.
I then did a hard reset and started again. I diabled the wireless on my old modem/router and chose the "create wireless network" option in airport utility. I think it worked because I have internet and a green light but to be honest I have no idea what I did. I know it's in bridge mode but only because I didn't know how to set up the other options.
Also, I've ended up with three networks out of this process. The default network for the AE (but it has one of those yellow error icons next to it in the available network list), the one I set up and a 5ghz of the one I set up. Neither the default network of the 5ghz network show up in the Internet and Networking control panel, which is where I delete them. I just thought this was odd.
What I'd like to know:
Do you have to set it up in bridge mode when you have an existing wireless modem/router?
If not, is there any benefit to setting the AE up as the router instead of using the Netgear?
If I create a new network should the default network still be showing up in my list of available networks or have I done something wrong?
If I have a 5ghz network, does that mean that the other network I created is only 2.4ghz or is it still dual band?
Considering the devices I have would it be beneficial for me to have a 5ghz network for certain devices only like the Apple TV?
As you can probably tell I have no idea what I am doing. I'm basically just clicking stuff and seeing if it works.
Any help/advice is much appreciated
Thanks
Jo

Hello Jo Sugden. Welcome to the Apple Discussions!
Do you have to set it up in bridge mode when you have an existing wireless modem/router?
You don't have to but, most likely, it will be the best configuration choice when you have the 802.11n AirPort Extreme Base Station (AEBSn) connected to your main Internet router by Ethernet. In this configuration, all NAT & DHCP services will continue to be provided by the Netgear router. This will allow all wired or wireless clients connected to the AEBSn to get their IP address (and be on the same subnet) from the Netgear ... and this would allow clients connected to either router to "see" each other.
If not, is there any benefit to setting the AE up as the router instead of using the Netgear?
If, for some reason, you wanted to create a separate subnet, configuring the AEBSn as a router would allow for this.
If I create a new network should the default network still be showing up in my list of available networks or have I done something wrong?
By default, your AEBSn will create two wireless networks with the same Network Name; one broadcasting in the 5 GHz band, and the other in the 2.4 GHz band. The default name for both of these will be Apple Network NNNNNN. You have the option, within the AirPort Utility, to change the names of each network.
When connected by Ethernet, and in bridge mode, it would be beneficial to name your AEBSn's networks the same as that provided by the Netgear. This would create what is called a "roaming" network ... where you literally can roam with a laptop from one router to the other and still be on the "same" network. This also is a way to extend the wireless range of the Netgear.
If I have a 5ghz network, does that mean that the other network I created is only 2.4ghz or is it still dual band?
As a minimum, you will have three wireless networks: one provided by the Netgear and two provided by the AEBSn. By giving them all the same Network Name, they will appear as one to any wireless client. However, they will all show up in a utility like iStumbler or AirRadar.
Considering the devices I have would it be beneficial for me to have a 5ghz network for certain devices only like the Apple TV?
Yes. Operating a wireless network in the 802.11n Radio Mode in the 5 GHz Radio Band offers the best potential bandwidth ... around 300+ Mbps. The only real drawback of the higher frequency band is that the signal strength drops off more rapidly with distance than in the lower frequency band. Also higher frequencies cannot penetrate objects (like walls) as well.
Ideally, you would want to place your Apple TV or other streaming devices in the same room as the 5 GHz network ... or connect them to the router by Ethernet.

How do I setup my Time Capsule as a wireless router?

I bougt a Time Capsule and installed on an existing network to run backup for my Mac. I got it to work succesfully, but.
Now I have moved, and need to use it as a wireless router and still keep running backup.
How do I do this?
Thanks

but I need a modem and connect it to the Time Capsule?
Yes. You need to contact an Internet service provider who will set things up for you and provide you with a modem.

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Setting up time capsule with existing wireless router and another time capsule

Similar Messages

Maybe you are looking for