Setting up tracks for Stylus in Logic??

I used to do this in Logic 6, but can't seem to remember how now that I'm in Logic 8.
I'm running Spectrasonics Stylus. I want to set up 8 tracks in Logic (arrange) that correspond\slave to 8 tracks of Stylus. Where would I look in the manual to get instructions how to do this?
All ears, thank you...
Ben

It´s really easy to do this nowadays. Simply click on the plus button in the Arrange window to create an new track; choose software instrument. Next to the square where you choose the number of new tracks, check "multi-timbral" and you´re nearly done!
In Arrange you can now see several tracks with the same instrument. Insert Stylus on one of these tracks. Every track is controlled by its own midi channel. So now you can control the different tracks in Stylus independently!
/juhani

Similar Messages

  • T5SSCXSSSERVICES - Set Data Tracking for Individual Self-Services

    Hi,
    We have a requirement for BI Report to fetch data from table :T5SSCXSSSERVICES
    The above table could be filled with data when we perform any activities in ESS and MSS.
    I wanted to know what are all required configuration to get data in to the table T5SSCXSSSERVICES
    I understand below mentioned configuration are required:
    IMG Node 1: Activate Data Tracking for All Self-Services
    IMG Node2: Set Data Tracking for Individual Self-Services
    Is it required to activate Business FunctionS et - HR Administartive Servcices?
    Guide me with more inputs,
    Regards
    Ramanathan

    Hi Ramanathan,
    I am facing the same doubt now, are you able to share your experience on how to populate  T5SSCXSSSERVICES ? Appreciate that, and thank you in advance.
    Regards
    Kir Chern

  • Setting midi channel for ES2 in logic express 9

    i have a track selected with an ES2 patch
    I can play from my midi keyboard, sounds good and I can see the midi coming in from my midi channel
    problem is it's not the midi channel i selected in logic for the track
    it appears everything with logic is in omni mode
    i can play one of my keyboards in channel 3 and the other keyboard in channel 5 and both trigger in logic channel set to midi channel 7
    please, any suggestions?

    Unfortunately it did not work. I am playing in midi channel 6, and it shows properly on the midi in/out panel near the bottom of the screen by the numerator and cpu meter. Shows the midi notes coming in just fine
    I have my software synth track selected as midi channel 3, and it plays this track....while my controller is in channel 6
    I can also set iLogic Express to play an external midi track to any midi channel and it will still play no matter what channel my incoming midi channel is set to (1 - 16)
    Midi is getting into Logic Express just fine
    So why will it not only play in the midi channel I have selected for the track?
    I also want to use an additional midi keyboard (or usb) to play a different track and midi channel, but they all play as if in omni mode regardless of the channel set from the transmitting keyboard and the information showing on the midi in/out panel
    I am using an old Motu 8x8 midi interface into an M-Audio Firewire Audiophile which has one single midi in and out (no midi thru) to the mac.
    Works like a charm except in Logic Express
    Thanks for your help - I'm truly lost..... and I did read the manual cover to cover to try and find the answer
    Thanks

  • Setting track for a captivate course

    Does anyone know if you can set up "tracks" for a captivate course in the LMS.
    I have a course with a lesson that is only applicable to certain group of learners and we dont want the rest of the company to view that information.
    Our LMS does have the capability to set up tracks for courses created directly in the LMS system, but I originally created the course using captivate instead.
    Any advice is greatly appreciated.

    If it is critical that one role does NOT see what the other role should see (e.g. for security reasons) then you need to have three separate versions of the course and set up your LMS to determine which role the person belongs to so that the only choice they get is the one appropriate for them.  Most LMSs allow you to configure role-based learning this way.  You add people to the roles set up in the LMS and that controls the learning options they see.
    Doing what I suggested in Captivate is really just a way to have slightly personalised content for different roles inside the same project file.  But the downside is that when you get to the quiz, everyone has to do the same questions, otherwise your quiz score can never be 100%.  Then you'd need to resort to using a target for points scored instead of a percentage out of 100.

  • How to set up Multiple Playback tracks for a "Set" or "Concert"?

    Hey Gang...so I'm venturing into MS2(2.2.1) now and have a feeling I just need some help understanding the building blocks.  Here is what I'm trying to do:
    I want to set up a concert for solo gigs where I basically will perform saxophone along with backing tracks (audio).  On some tunes I use an EWI, and on others I use different saxes (EQed diff, with diff EFX, so on).  SO, I want to create "patches" for each song, and have that "patch" contain the midi sound (for EWI) or settings for the diff saxes. 
    Here is the important part:  I also need each individual "patch" to playback a different back-track. 
    I have started all this with the tune "Summer Madness", and here is the problem:  When I switch to a new "patch", I still get Summer Madness.  If I load a different BT into playback, that track is then "universal" through ALL "patches".  It must be something simple, but what am I missing?  Do I have to create multiple channel strips with the playback plugin loaded (seems awefully designed, and a waste of resources?) and assign DIFFERENT controller buttons (or whatever) to playback different tracks? (again, aweful, and a complete waste of midi controller real estate).
    If I have explained all that poorly, my appologies.  I just am hoping MS2 has a way of "auto-loading" a new BT everytime I switch to a new "patch".  I cannot seem to figure this one out.  Any help is greatly appreciated!
    Thanks.

    Hi
    Depending on your needs, you may find that Set level offers the best approach:
    Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
    You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
    CCT

  • Set default audio track for playback in Source monitor

    So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
    They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
    My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
    Thanks!

    I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

  • How can I make MainStage2 use tempo tracks for older logic tracks?

    I am trying to play a recording live that is 5 years in the making. Obviously, Logic has progressed in this time. Anyway, there are tempo tracks for the songs and I can't get MainStage2 to recognize them so I have been forced to add a click track and make them part of the bounce. I might be better off with the click track method since I can push it to one stereo channel and not the other, but I was wondering if there is a way to try and get the tempo information recognized by MainStage2 (perhaps by transforming the old projects into new projects??). I would like to try for one track and compare the pros/cons of the two methods. Thanks in advance.

    Wouldn't iTunes be more appropriate for this?  There doesn't seem to be any video involved.

  • When you set up tracks what is best to pick for the input and output?

    When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

    First part of the question I don't understand, so could you elaborate please?
    Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

  • Best drum loops for use with Logic? Ease of use, usability, etc.

    Hi,
    I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
    I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
    Thanks

    try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

  • Syncing Fast Track Ultra (Slave) With Logic Express (Master)

    I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?

    Hi,
    1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
    2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
    Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
    Fox

  • How do i set up my yamaha dtxploxer on logic pro 9?

    Hi Apple Community,
    I have an electronic drum kit - yamaha dtxplorer. I'm having an issue setting it up on logic so that I can record a jam in real-time as either an audio or midi file. I don't believe it's an issue with my audio interface (lexicon U22). I think it's because I need to program logic.
    I do get a sound when I plug the kit in via the inteface, but, for e.g, if I hit the low tom it doesn't make a low tom sound, it makes the sound of a crash cymbal, and when I press the foot pedal it doesn't make any sound!!
    If anybody has any suggestions I'd be most grateful.
    Cheers
    Wadders

    I don't think you will need other software.
    I looked at the DTX drum assignments in the manual, it's very close if not exactly set to the GM standard.
    Here they are.
     Input Instrument Note Number 
    1 Snare 31
    1 Snare-open rim 34
    1 Snare-close rim 37
    2 Hi tom 48
    3 Mid tom 47
    4 Low tom 43
    5 Ride 51
    5 Ride edge 52
    6 Crash 49
    6 Crash edge 57
    7 HI-Hat open 46
    7 HI-Hat close 42
    7 HI-Hat foot close 44
    7 HI-Hat foot splash 85
    8 Kick 33
    9 Option 55
    The suggestion at the Apple store was a good one, the Garageband drumset will probably be closest to General MIDI. All you really need is a drumset to match your note output. Be sure to set the track you're using to MIDI channel 10.
    One other suggestion I might make is to use the "transposition" feature in the inspector, you may be able to transpose a drumset to match your note output.

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • How to set-up Mainstage for 2 Keys, 2 patch lists in a single concert?

    Am new to Mainstage and Logic. Need help ASAP for a show, please, and am too lazy to read the manual   How do I set up Mainstage for 2 Keys with 2 performers each controlling a patch/set list of their own in a single concert file? First rehearsal is Monday (Memorial Day) with opening night a week from today, so time is of the essence, and your help is sincerely appreciated! Thanking you in advance. --Jon

    koolzero wrote:
    When I start TI after I pointed it to my repository I get a message that no packages applicable were found.  I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
    Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
    Assuming the items you did download were not already installed on your client with TI it should work.
    Message Edited by zilla on 2009-05-06 10:23 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • How can I set up a sustain pedal in Logic 9?

    I have scoured the forums and Logic Help pages for anything that can help me hook up my sustain pedal in Logic.
    I have a Korg Kontrol49 midi keyboard with two pedals hooked up to it; a "Switch" and "Pedal". In all my previous programs, such as Reason 4 and Cubase 5, the "Switch"-pedal worked as my sustain. I never had to configure it because the program automatically figured that out as the sustain is usually set to Control #64.
    But not in Logic - I never get a sustain on any of my Instruments using either of my pedals. I have clicked on and off on #Control #64 off (sustain)" in Midi Preferences to no avail. Nor I cant find any liturature that lends me a hand in guiding me how to set it up.
    Can anyone out there assist me with this?
    Thanks-a-million

    Im all for the dumb questions, because its probably a dumb mistake I did.
    I have checked that both sus ped and exp. ped are fully plugged in.
    Neither pedals show up in the Midi meter in the transport.
    I dont know how to set a patch for the keyboard, but if both pedals work in other programs (i.e. Reason), wouldn't it not be an issue with a Logic configuration and not in the keyboard's setting? (Unless I have a separate Logic setting that loads automatically when it detects Logic is booted. I dont know how that would work though.)
    Thank you for your prompt help, though. Any other ideas?

  • Missing Functionality -where do I set a budget for a Project?

    Budgeting for Projects is non - existent
    Budget for Profit and Loss for a particular project , How is it done ?
    Does not work , No facility to put in Budget for a project ?
    The report I am trying to run is:
    REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
    The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
    This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
    1 Budget setup screen - this has no facility to setup a budget for a PROJECT
    2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
    PS MailOrder project is just an example.
    Version: SAP BUSINESS ONE 2007 A Patch Level 41
    Description of requirements: As above
    (Valid as of: (Date that this legal requirement is applicable) N/A
    Business needs: Customer cannot set the budget for a project and this effects their accounting.
    Examples: (Please describe a typical example, how the functionality should work.)
    Current Workaround: None.
    Proposed solution: Create a Project and then be able to set a Budget for it
    Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

    Hi Darpal/Kerstin
    Please ignore my previous replies because I have now worked out why this idea will not work:
    Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
    So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
    My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
    Please let me know if you need further illustration of the problem.

Maybe you are looking for