Setting up Veritas DMP with a 6140...

Hello!
I'm somewhat experienced with StoreEdge 3510 Arrays and can set them up in my sleep, but I'm having no luck when it comes to setting up Veritas DMP with a 6140 I've somehow become responsible for configuring. Does anyone have any information on ensuring the 6140 array is configured properly so vxvm DMP functions? I've got the luns configured, the host all cabled up, and the luns under vxvm control on a Sun V440 with Solaris 10. I can see the luns, write data to them, but I can't seem to collect the information needed in order to have DMP function. As such, the vxdmpadm command only shows one path to the array despite having four physical FC connections between the 6140 and the V440 server.
Any help is greatly appreciated! I'm sure I'm just "missing something" since this is new hardware to me, but I can't seen to find out what.

All the 6140 setup documentations are on www.sun.com/documentation/.
There is no special step as long as you have a qualified version (for 6140) of VxVM and you install the correct ASL.
At this point, you will need to create the initiators using CAM, with the right host type. In CAM you can select different host type, this defines how the 6140 f/w has to behave when there is failover.
If you use VxVM on the host and DMP, you have to use the host type Solaris DMP for your initiators, at this point the 6140 f/w will not that AVT (Automatic Volume Transfer) has to be turned ON.
Regards

Similar Messages

Questions about setting up my network with my Mac Pro?

I'm trying to set up my network with my Mac Pro. I have two other roommates that need internet and a printer that we all need to access. The modem is with my Mac Pro in room 1, the printer is with another PC in room 2, and another PC with wifi is in room 3. What is the best way to connect all these.
My idea was to install an Airport card in my Mac Pro, then add an Airport Express station w/airtunes to room 2, to connect the PC and printer. That way, room 3 can access with wifi, and room 2 can physically plug into the Airport Express station. Problem with that is that the Airport Express Card must be professionally installed in my Mac Pro and that $80+ charge on top of the Airport Express and Aiport Card itself, turns this into a $200+ endeavor.
I also have a wireless Linksys router and Linksys WiFi USB receiver. Anybody have any other ideas?
Mac Pro Mac OS X (10.4.9)

Your plan wouldn't work anyway. The Mac Pro can not create a WDS compatible wireless network. Therefore the AirPort Express (AX) can not use WDS to wirelessly join the network. Therefore the AX's Ethernet port will not be activated.
The best solution is to buy an inexpensive wireless router [or the AirPort Extreme base station (AEBS)]. Connect the Mac Pro via Ethernet to the router. Add a wireless adapter to the PC in room 2. Therefore the PCs will connect wirelessly while the Mac Pro connects via Ethernet.

Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

I have itunes set up to sync with my Ipod Touch and my Ipad. As of today, it keeps looking for an iPhone to sync with and give me an error message. I don't have an iPhone and don't know how to stop it from popping open with this error message.

I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How do I set up a home with 4 Platform components, 3 v. 10 and 1 v. 9.2?

This is probably simple, but I can't find the answer in the various documents. I want to install a home with all the latest Platform components. Since Integration 10 has been delayed, I want to set up a home with Server 10, Workshop 10, Portal 10, and Integration 9.2. How exactly do I do this? After I install the first 3 components, when I try to install Integration 9.2 the installer wants also to install Server 9.2 and Workshop 9.2.
Or is what I'm trying to do even advisable? Does needing Integration mean I have to use Platform 9.2 MP2? How exactly should I set up my home?
Thanks in advance for your help.

I am considering putting three or more OS's on my
computer. Would someone show me how to set up a
master boot record to give me a choice between
Windows XP Professional Edition, Solaris 10 6/06, Red
Hat Linux 7 (Fedora Core 5), and possibly Knoppix
5.0.1, Snappix, and Morphix?Have you seen this article?
http://www.sun.com/bigadmin/features/articles/multiboot_laptop.html
I want the boot record
to be posted in both Windows' BOOT.INI file and in
GRUB.What do you mean by that? You can only have one thing in the MBR, but of course that thing could chain to something else.
Darren

How do i set up a slideshow with pictures from multiple iphoto libraries?

How do i set up a slideshow with pictures from multiple iphoto libraries? One library is in my Macbook Harddrive, the other 2 libraries are in an external harddrive. Thank you!!

You can't, simply. An iPhoto Slideshow can only draw from a single library, so you'll need to get all the images into one.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync.

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Set up a family with Apple Products

What is the best way to set up a family with multiple apple products?
Equipment:
My wife and I each have iPhone v4s
We have an AppleTV version 1 and an AppleTV version 2
iPad 2
NAS in the closet with iTunes server (which we don't utilize)
iTunes installed on the desktop in our office on a computer that we share. We each have our own user account.
Media:
Ripped 1000s of cd's to itunes on my account
Music bought on wife iPhone, sync'd to her library
Music bought on my iPhone, sync'd to my library
Redeemed music on my iPhone, sync'd to my library
Digital copies of movies from DVD packs in my library
Purchased movies and TV shows on AppleTV version 1 sync'd to wife library
Multiple apps that have been purchased, each different on each of the different iOS devices
Detail questions:
My wife wants to have ALL of the ripped music and movies in her account. How do I set this up so I don't have tons of duplicate files and have to manage importing new rips to multiple libraries?
To have the Apple TVs work, we need to be logged in to wife's account and have her iTunes running. If I dock my iPhone on that computer, then it tries to sync to her account. If I turn off her iTunes, then the TVs don't work. How do I set this up so we don't have to worry about who's iTunes is running to watch AppleTV and to sync our iProducts?

It is not possible to use any D-Link product in an Apple WDS, since none of D-Link's products support Apple's implementation of a WDS.
If you are in the market to buy a non Apple wireless router, get a Linksys WRT54G or WRT54GS - these two models do support Apple's WDS. Use that router as your network's "base station", and use the Airport Express to wirelessly extend the range of its network.
If all you want to do is extend the range of an existing Airport Express that you do not want to replace by a non-Apple wireless router, I recommend you spend the money to buy a second Airport Express.

How do I set up home sharing with I pad

HOw do I set up home sharing with Apple TV on my I pad?

don't believe ios devices support home sharing think only computers support that
with ios devices one can use airplay
if it's an ipad 1g only the audio part of airplay
as in using the appletv as remove speakers

Setting up Veritas DMP with a 6140...

Similar Messages

Maybe you are looking for