Setting Up Video Delay

Is there a way to set up the software so that you can delay live footage?
Here's what I'd like to do....
I coach volleyball so I would like to set up live video of the players performing skills. It would be set up so the camera would film them and the time delay would allow them to go to a monitor to watch themselves.
I've seen discussions on how to set it up with an older version of Tivo but I would like to use Elements if possible.
Thanks!

There is hardware and software that will allow you to do what you want. My golf coach uses such. Basically, she is able to record to the HDD (like Adobe OnLocation, part of PrPro's suite), and then allow playback, with Frame-by-Frame shuttle, slo-mo, and even a telestrator to add lines, indicating aspects, like club shaft angle. She can alter the display to include, or remove the actual video, so that one can see just the path of the illustrated club, or shoulder angles, or a combo of both. Her console has a shuttle ball to manually control the speed. Her unit has a built-in thermal printer to give you a hard copy of the Frame, or a sequence of stills of Frames. If interested, I can get the make/model of her unit, which fits into a small suitcase, and has detachable legs to stand it up. Her's runs from a motorcycle battery and works very well. The monitor is somewhat small, but has an adjustable hood so that viewing in bright sunlight is still pretty good. She uses a Canon miniDV tape camera, tethered by FireWire. It is a great teaching aid. She can also upload the video to the miniDV tape, so that one can take it home to review.
I've had ski racing clinics, where similar was utilized, and it is portable enough to get up the mountainside on a snow mobile.
Good luck,
Hunt

Similar Messages

In Imovie '11, how can I drag more than one set of video clips to my project?

In Imovie '11, how can I drag more than one set of video clips into my project. I know how to highlight in yellow and drag the set, but can I drag a group of sets? Thanks

To select multiple clips, hold down the command key as you click multiple clips. Then you can drag them all at once.
To drag all clips at once, select one, then Edit/Select All. Then drag them all.

How can I set up a delayed analog trigger on PCI 6115 DAQ

I have an S-Series PCI 6115 DAQ which I’m running with Labview. I’m using it to measure signals from an acoustic emission sensor and two force transducers. I’d like to set up a delayed analog trigger which will start acquisition on all three channels a period of time after a selected channel’s voltage exceeds a threshold.
Currently I’m using the AI Config VI in line with the AI Start VI and AI Read VI to capture data after a analog hardware trigger occurs. A software trigger probably wouldn't work because I have to sample my data at 10MS/sec. My setup works fine for triggering without any delay or skip counts. However, if I set the delay or skip count in the additional trigger parameter field of the AI start VI, there is no effect, and the device still starts capturing data immediately after the trigger is received. What is the cause of this, and how can I get around it?
Also, is it possible to sample the channels of a PCI-6115 DAQ at different rates? Right now, I’m sampling all my channels at 10MS/sec and throwing away data on all channels except one. However, this seems relatively slow and eventually I would like to attempt pseudo-real time control using my data.

rpursley8 is right about needing to get the counters involved if you want a hardware timed delay in your application.
Concerning whether or not you can sample at different rate, check this document out.
Sampling Different Channels at Different Rates with NI-DAQmx
Otis
Training and Certification
Product Support Engineer
National Instruments

How can I set multiple videos to "TV Show"?

I'm importing an entire season and they all default to "Movie". So, I know that I can set the video type to "TV Show", but if I select more than one video, there is no "Video" tab. Does anyone know how to set the types of multiple videos at once?

This is a good question and I haven't found a method yet either. This seems to be an oversight on Apple's part.
Message was edited by: Conal Ho

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

Unable to set up video for editing

I am a novice and am using the trial version of Premiere Elements 8. I have gone through the Using Adobe Premiere Elements 8 product support quite a few times over the past several days and am not able to figure out how to set up videos for editing.
When I am in Elements Organizer, the various files on my hard drive show on the left. Two video files converted to MPEG show in a middle column. I can play them by double clicking on them. However, I am totally lost on how to set them up so that I can edit them (cutting into clips, improving lighting, etc). Would someone please let me know either how to set up my videos for editing or let me know where there are help discussions or tutorials.
Thanks for any help.
Steve Gillings

Steve,
You are in the Elements Organizer, which more like a catalog manager and not a video editor.
One of the ways to start editing is as mentioned by John in the post above.
The other way is to launch Adobe Premiere Elements directly which can be done simply by clicking the desktop icon and selecting new project option
OR you can run the AdobePremiereElements.exe from your install location.
I see that you have installed the tryout version for Elements 8, that is last year's version, Elements 9 is already out, its better that you try the latest version. A lot of us on the forum have started using it.
cheers.

Oracle XE Listener Requiring Service To Be Set To 'Automatic (Delayed Start

Can anyone offer any insight/explanation as to why the Oracle Listener would require the service to be set to 'Automatic (Delayed Start)' When it is set to just automatic, it does not even try to start. No output to the listener log, and nothing to the event viewer. It is as if it never even tries to start. Once switched to 'Automatic (Delayed Start)' it works as expected. Additionally if you manually start the service due to it not starting automatically, it works fine as well.
OS: Windows 7 64BIT
Service is being run by the local system account and is set to allow to interact with desktop. -Local system account is part of the administrator group.

OS: Windows 7 64BITFirst point, win7 isn't on the 10g XE "supported OS" list. The installer is nearly as old as Firefox 1.0. Not to say folks haven't been able to get it working, plenty of other threads cover that topic.
Delayed start, auto start ... how critical is that functionality for your install? My suggestion, set it to Manual, and if you need the database, start the listener and then start the database service. If the database isn't needed keep your RAM and system resources available for other stuff.
Sorry can't be more helpful (esp. for win7, don't have it, don't use it, same for vista) but XE is more of a "playground" environment for test drives, kicking the tires, etc., a practice resource intended as an introduction to managing an oracle instance.
And always start the listener service first, that allows the database to register with the listener as it completes its startup processing. If startup goes the other way around, the Apex might not be immediately available, but a sqlplus system connection and `alter system register;` command will fix that.

External iSight camera video delay in 10.5.2

Since upgrading from Tiger to Leopard, external iSight camera has a short video delay which renders it unusable for video conferencing in iChat AV. Has any one noticed this? The cam has the latest firmware so that is not the problem. The delay is very obvious in Photo Booth as well. The delay is also apparent on my Macbook Pro 17 with built in iSight. Is this normal?

Welcome to Apple Discussions, bzamp1
I do not experience the delay you describe, but I do not have any known solutions to offer. Because the problem is the same on all of your Macs including your MacBook Pro, you can rule out processor speed as the sole problem.
Some iNtel Mac users report poor AV sync in Photo Booth even though they are running no other applications and have plenty of free space on their hard drives. However, you experience the problem with other apps, too. The fact that your problem occurs with multiple software applications remove candidate issues like bad applications software, low internet connection speeds, or improper network configuration.
If you updated to 10.5.2 via your Mac's Software Update... feature, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.5.2 Combo Update.
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

How do i set up video call between two huawei y550

how do I set up video call to two huawei y550

Hi,
When you go into the contact you want to call is there not a little portrait icon/phone as this would be your video calling button.
Thanks,

I am trying to use a microsoft webcam & set up video/...

I am trying to use a microsoft webcam & set up video/voice communication on MSN messenger. I can do instant messaging but have had no success with video. I have a wrt54g wireless router - It seems to be start to connect but then gives off a connection or time out message - Any one have problems doing this or a solution ?
Linksys chat suggested it may be related to the firewall & maybe updating the firmware - but looking at other messages here, am skeptical -- I had similar connection problems with AIM.
otherwise - anyone able to set up video chats using another messenger (or router even). Thanks for any help -

hi... logon to the router's setup page and try reducing the MTU values to 1365,click on the "applciations & gaming" try forwarding 6901 port for Voice communication...and as far as Video communication concern you need to forward the port for the Webcam that you are using, get in touch with the Microsoft and get the port no. of the particular camera that you are using.. and forward it on the router's setup page...also make sure that you have latest firmware installed on the router...check whether it works for you or not and let me know...

How to set up video call to be able to choose NOT to show or to show my face?

Hello,I have just upgraded to new version of Skype.I would like to set up the video calling for my privacy. I have read the instruction;All saying to go to"tool"but I cannot find "tool" in new version of skype,Please advise how to set up video calling,I just want to talk like a phone, without exposeing my privacy to everybody. Please advise.Nekomilk

Most likely you are using the "modern" (metro) Skype app. You will have all the customization options available if you install Skype desktop version. https://support.skype.com/en/faq/FA12189/what-s-the-difference-between-skype-for-modern-windows-and-skype-for-windows-desktop In any case, the metro app will be disable after July 7 this year. http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/

How to set up video call to be able to choose NOT ...

Hello,
I have just upgraded to new version of Skype.
I would like to set up the video calling for my privacy.
I have read the instruction;
All saying to go to
"tool"
but I cannot find "tool" in new version of skype,
Please advise how to set up video calling,
I just want to talk like a phone,
without exposeing my privacy to everybody.
Please advise.
Nekomilk

Most likely you are using the "modern" (metro) Skype app. You will have all the customization options available if you install Skype desktop version.
https://support.skype.com/en/faq/FA12189/what-s-the-difference-between-skype-for-modern-windows-and-...
In any case, the metro app will be disable after July 7 this year.
http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/

Does AOL get your password when you set up video chat in Messages?

When you set up video chat in Messages you can use your iCloud email address/Apple ID if you select AIM as the chat service. To complete the set up it asks you to enter your iCloud/Apple ID password. By doing so, does AOL/AIM get to know your iCloud password?

HI,
In Messages > Preferences > Accounts you can use the + button lower left under the list of account and Add the same Apple ID as an AIM account as you used for the iMessages account.
AS part of the workings of iChat 6 and Messages the app also logs in to an Apple Server as well as the AIM Server.
The dual Login is so AIM cannot 'read' the password unless you have an iCloud Issued @me.com or @iCloud.com ID logged into the Apple Server as well.
This is a Pop up from Little Snitch checking if I will allow this Login to Apple.
@mac.com names from Apple, issued under the .Mac service and Paid for Accounts or as Trial Accounts or later during MobileMe as "iChat Names" are unaffected.
As you cannot recreate the Dual Login process here you cannot use iCloud issued IDs on this AIM Page.
This does mean some Privacy settings are unavailable to you.
It also means if AIM "Suspend your account" (normally for "Unusual Activity") then changing your Password at Apple has no effect as they can't tell you have changed it.
9:57 PM Saturday; February 23, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have a problem of display live video delay of nearly 10 minutes.

I use FMS 4.5 Interactive.
I have a problem of display live video delay of nearly 10 minutes.
Is there a way to customize or edit it.
Which previously was a regular.
please guide me.

please advise me.

After Effects warning: couldn't set Quicktime video output display mode

After Effects warning: couldn't set Quicktime video output display mode
I'm getting this error when exporting video from after effects. I also get it when the program starts up. I'm using Windows XP. Cannot find anything about a fix anywhere. Does anyone know how to fix this?

Thanks for your reply. I profess ignorance regarding the GDI only mode and have no idea how to access that. Can you give me a little more info on that?
I am using an ATI Radeon HD 3850. I have two monitors on that card, Monitor one is a Trinitron HP 1130 CRT.(set to 1280x1024 16bit) The other is DVI wide screen Ilo 26 inch monitor. (1024x768 at 32 bit)
I have a BlackMagic Design DECKLINK standard definition broadcast card which outputs component video to a sony broadcast Beta deck. 480ix720 standard video.
The machine has a gigabyte motherboard. Intel Core 2 quad cpu 2.66 ghz
2.50 gb ram reported (4gigs installed)
These hasn't been a major issue as I can still output AVI uncompressed but it is annoying.
John

Setting Up Video Delay

Similar Messages

Maybe you are looking for