Setting up WCG200 and WRT54G together

I have a WCG200 router connected to my internet provider cable
and I have multiple computers connected to a WRT54G router.
Is there a way to connect these two linksys wireless routers to
access internet by my computers?
Thank you.
M.-A. Cantin

what you are looking to do cannot be done using a wireless connection.The WCG has to be hardwired to the WRT for it to work the way you want.
Also if you could be a bit more specific as to what it is you wanna do exactly.

Similar Messages

  • Setting up and running iPhoto and Aperture together.

    I'm trying to figure out if it's possible to use iPhoto as my main image library. I want to be able to import pictures from my camera straight to iPhoto. But i would like to also have it set up to be able to edit pictures in Aperture but save them back into iPhoto.
    Basically i would like to have my library contained in iPhoto but edit pictures using Aperture. Also if there is anyway to get this same setup using Adobe Lightroom.
    I just really love the speed you get from iPhoto, But I love the feature set from Aperture and Lightroom.
    Any help is greatly appreciated.

    Here is something I tried when I downloaded the trial version of Aperture 3.
    I had a picture in iPhoto that I liked but had a blemish that spoiled it. The blemish was a dark black line at the top margin. Nothing I tried using the retouch tool in iPhoto removed the blemish. So one of the first experiments I made was to move this particular photo into Aperture 3 and use the retouch tool there. The blemish was gone in one swipe.
    Next I dragged the photo to the desktop, then opened iPhoto and dragged the picture into "Events" and finally into the specific event it belonged to. The Aperture edit held.
    Is this not one way to use the two together? I cannot retest the process because my trial download has long since expired. I didn't have time to really get to know Aperture in the trial period and so have not bought it.
    Further, I recently Googled "integrating iPhoto + Aperture" and found this:
    +iPhoto - Because of the availability of options for books, cards, and calendar templates, you might want to use your Aperture pictures in iPhoto. To access the images from your Aperture Library within iPhoto, click on File > Show Aperture Library. When the window opens, you can browse, select and drag the images you want to use in iPhoto.+
    +The tight integration of all Apple software, and even with some other 3rd-party applications, makes it possible to make the most out of your photos in Aperture.+
    Again, because I don't have Aperture 3, I can't test this process. But I thought it suggested a fairly simple way to do what I want to do. Has anyone tried this?
    (PS. I am interested in Aperture because I shoot exclusively in RAW.)

  • WRT54G is set to moderate and I can't open it.

    I need help in opening this xbox live has be come slow ive tried logining on through the web by typeing admin as a password and it doesnt let me through. i have a wrt54g ver. 3.0 plus this a router that was given to me with no disc and all i have down was hook it up to the cable modem then hooked in my xbox and and it worked fine for a while but the it told me that the NAT was set to moderate and now cant DL new maps for Halo 3. Any ideas on how to fix this would be very helpful. Thank you

    As you are not able to access router set up page .... use default password admin ..... if it is also not working ..... reset the router for few seconds... after reset .... reconfigure the router ....
    Regarding NAT .... access setup page of router ....under setup .... look for MTU .... change the size from 1500 to 1365 ...
    Click save settings ....

  • Having trouble setting up a linksys WRT54GS router with v...

    Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self  but the router will not connect  to the internet when installed like the cd tells you to.
    online help and phone help has been less than helpful,  anyone have any Ideas?

    Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field.  PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas? 

  • How can I create a client console and work together with the Cache Server?

    How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
    The following is the cache server file: contacts-cache-server.cmd
    @echo off
    setlocal
    if (%COHERENCE_HOME%)==() (
    set COHERENCE_HOME=c:\coherence
    set CONFIG=C:\home\oracle\coherence\Contacts
    set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
    coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
    set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
    java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
    :exitEdited by: junez on 23-Oct-2009 09:20

    Hi
    To run the console, change DefaultCacheServer to CacheFactory
    Paul

  • Setting Up VLAN and QoS for VOIP on SG200-18

    We recently purchased the SG200-18 smart switch to replace a Netgear unmanaged switch. We're moving our phone service to VOIP through our local ISP as well. 
    I've currently got the VOIP phone plugged into Port 17 on the SG200-18 (it's a Grandstream cordless VOIP phone).
    I want to put the VOIP phone on a separate VLAN from the rest of the network and optimize the QoS settings so that the VOIP phone has exceptional audio quality even during intense network traffic.
    Here's my questions:
    1. Do I need to adjust anything on the type of port for Port 17 (since it looks like some form of Combo port)?
    2. How do I go about isolating the VOIP phone on it's own VLAN (I'm seeing VLAN and Voice VLAN settings, not sure which one to use; I tried setting a VLAN and broke Internet connectivity to the phone until I went in and removed it)?
    3. Do I need to adjust any QoS settings on the switch to better optimize the VOIP phone?
    A couple of additional questions about the GS200-18 in general:
    1. Do I need to adjust any of the System Time Settings on the switch? I'm in Central Time.
    2. Do I need to adjust any of the Green Ethernet/Energy Saving settings or should I stick with the defaults?
    Also, a couple of "getting started" side questions to Cisco:
    1. I've registered a My Cisco account. What do I need to do to register my switch with Cisco and associate it with my My Cisco account?
    2. What are the benefits of taking out a Cisco Small Business Support Contract, and about how much would it cost on the SG200-18 (I ordered it from Provantage)? I'm curious to see if it's worth the money.
    Here's my "specs":
    Switch: SG200-18
    VOIP phone: Grandstream DP715 and 710 expandable handsets
    Plugged into: Port 17 on the SG200-18
    ISP: Local ISP (Direclynx)
    Connection type: 3M down/500k up DSL, moving to a wireless connection coming up which will give us faster speeds
    VOIP backend provider: VOIP Innovations
    Router: Apple Airport Extreme AC model (I run all Macs and iOS devices and OS X Server on the network, so using the Apple router makes setup easier, since it doesn't QoS, trying to QoS and VLAN at the switch level)
    Thanks everyone!

    Hello,
    Lots of different questions here so I'll try to make sure I don't miss anything.
    1. Do I need to adjust anything on the type of port for Port 17 (since it looks like some form of Combo port)?
       The way the combo ports work is you can either use the SFP slot for a fiber connection or the copper ethernet port, but not both at the same time.  Other then that they just function as normal network ports.
    2. How do I go about isolating the VOIP phone on it's own VLAN (I'm seeing VLAN and Voice VLAN settings, not sure which one to use; I tried setting a VLAN and broke Internet connectivity to the phone until I went in and removed it)?
       It sounds like you created the VLAN correctly and assigned the phone, however there wasn't anything doing any routing for that VLAN.  You would need to have a VLAN capable router or a layer 3 switch so that something would act as the default gateway for the voice VLAN and route the traffic for you.  Since there was nothing like this your phone lost it's connectivity to the internet when you placed it in the new VLAN.  I don't think the Airport is VLAN capable, but we will come back to that.
    3. Do I need to adjust any QoS settings on the switch to better optimize the VOIP phone?
       Once you have a seperate VLAN setup for the phone properly you only have to tell the switch what your Auto Voice VLAN is going to be and it will automatically apply recommended QoS settings for the Voice VLAN and prioritize the voice traffic.  There are ways to do this manually and even with the phone in the same VLAN however the are considerably more complicated.
    1. Do I need to adjust any of the System Time Settings on the switch? I'm in Central Time.
       The system time isn't always very important.  You can set the correct time zone, however you should know the switch does not have a battery in it to keep track of time, so if/when it reboots or loses power the clock will reset.  If you would like the switch to maintain accurate time you should setup an NTP server so the time is automatically updated from the internet.  The switch will keep your timezone settings once you save them.  Time is mostly important for logging and things like that, so you can configure it if you like but it is not necessary.
    2. Do I need to adjust any of the Green Ethernet/Energy Saving settings or should I stick with the defaults?
       Green ethernet simply reduces the power usage of the switch slightly, so unless you are having odd issues where ports are disconnecting, I would just leave them at the defaults.
    1. I've registered a My Cisco account. What do I need to do to register my switch with Cisco and associate it with my My Cisco account?
       There isn't really a way to associate your Small Business devices with your Cisco account.  If you ever call in for technical support we will use your Cisco account and your serial number to create a support case, but even then they aren't linked together.  If you decide to buy a support contract, that will be linked to your switch's S/N and your Cisco ID, so in a way that would associate them together.  Devices being associated with Cisco accounts is something more common with Enterprise equipment, and mainly has to do with technical support cases.
    2. What are the benefits of taking out a Cisco Small Business Support Contract, and about how much would it cost on the SG200-18 (I ordered it from Provantage)? I'm curious to see if it's worth the money.
       There are a few advantages to a Support Contact.  Your switch comes with a Limited Lifetime warranty that includes 1 year of technical support and return to factory hardware.  With a service contract you get 3 years of technical support and next business day Advanced Replacement of the switch if it need to be replaced.  I just did a quick google search, and it looks like a contract (part #CON-SBS-SVC2) costs about $50.
    So there are a few other things to consider however.
    As a frame of reference the average VOIP call uses about 64 - 128 kbps max.
    Since you don't have a VLAN capable router or a layer 3 switch, a separate voice VLAN may not be an option.   You also mention that the Apple Airport does not do QoS, meaning we will only be prioritizing the voice traffic while it is on the switch.  When it is passed off to the Airport to be routed out to the internet all of the QoS settings will be lost, and normal network traffic will get the same priority as voice, since that is all up to the Airport.
    With one phone the hassle of getting more equipment and setting up advanced QoS isn't really worth it, especially if the link to the internet isn't going to be participating in QoS.
    One last thing I wanted to mention is you are switching to a wireless internet connection.  I would ask them how their latency and jitter is, as these two network statistics greatly effect voice quality, and usually wireless performs worse when it comes to voice traffic.
    I hope this information helps, if you have any more questions just let me know.
    Thank you for choosing Cisco,
    Christopher Ebert - Network Support Engineer 
    Cisco Small Business Support Center

  • How to keep form field and label together?

    In InDesign Creative Cloud (ID CC), I need to create a 20 page form (a type of questionnaire). As a prelude to doing this, I created a one page form. I am trying to keep labels (text) and fields together, so that if I add a question in the middle of the form, everything else moves down and stays in the correct alignment and relationship. Here is what I tried.
    Option 1: Anchored Fields. I created fields on a "fields" layer and labels on a "text" layer. The text layer generally had tables to help me see where fields should be placed. However, to keep fields and text in the same relationship on the page, I anchored the field to the text. Hoewever, this has the effect of moving the field object into the same layer as the text. When I tried to use the Articles panel to put the fields in correct tab order, I discovered that only fields (unanchored) that were in the forms layer could be dragged into the Articles panel; anchored fields (now in the text layer) could not be dragged into the Articles panel. Why?
    I know that I could also use the Object / Interactive / Set Tabs Order command, but I wanted to use Articles to see how that works.
    In this approach, I also could not figure out how to put underline the text form field
    Option 2: Tabs and Character Styles. I used character styles for underlining by not using tables, but using paragraphs and tabs to align where the fields should be. I applied a character style to a right-justified tab to get the underline. However, using this option, whenever I add a new question (field + label or instruction) in the middle of the form, everything else down on the page goes out of alignment.
    What recommendations do other form designers have? I have been trying to think of how IRS has "dense" or "complex" forms, and how these might be designed in InDesign CC. in order to apply similar techniques to my form design.
    I am running on a Mac, OS X 10.8.4, InDesign CC.

    Unless I am gravely mistaken, isnt this what you want?
    for (int i = 0; i < folderList.size(); i++) {
       String folder = (String) folderList.get(i);
        System.out.println("Folder: " + folder);
        System.out.println ("Messages: " + folderMap.get (folder));
    }

  • Airport Express and WRT54G v8

    Airport express firmware: v6.3
    WRT54G: v8
    I'm unable to get my Airport Express to join my existing wireless network in Client mode. I've been able to get it to join other wireless networks using WPA, but with my new WRT54G v8 I haven't succeeded;
    - Has anyone got an Airport Express to join a WRT54G v8 wireless network?
    - Does the Airport Express support WPA2 when joining a non-Apple 802.11g network? It just shows WPA on the drop-down box for me.
    - Is the channel selection important?
    - For WPA, I've previously had to enter a $ before my ASCII-format password. Is that true in general for WPA and WPA2?
    Having owned this Airport Express for 4 yrs, I have to say I'm dismayed by the level of frustration I've had with it, but I'm locked into it because I used Itunes.

    I have the exact same problem. I purchased the airport express yesterday, and trying to hook it up in client mode, wirelessly to the wrt54g to be a print server. I set it up with the ethernet patch cord attached to the airport express and the wrt54g. It gets set up great and I can print and attach my clients (2 windows and 1 mac) wirelessly to the wrt54g network. If I leave the ethernet connected within 5 minutes my wireless network slows to a crawl and then stops traffic. If I disconnect the ethernet cable instantly the network returns to normal speed. But the airport express is no longer reachable. Granted it doesn't have the same IP and has to re-establish connection. However, it never re-establishes and flashes amber. Seems like it has to be security related as it seems to connect OK when the ethernet cord is attached.
    I assume that to set the airport express up in client mode that the first configuration has to be made with the ethernet cord attached. Then when it resets itself to re-read the new configuration that I am supposed to unhook the ethernet cord. As it should be talking to the wrt54g through the wireless connection rather then the hard ethernet connection.
    The setup steps I go through are:
    - push the hard reset to get to factory settings
    - connect ethernet patch cord from airport express to wrt54g
    - bring up airport utility on macbook pro
    - airport is found and press continue
    - create a password - continue
    - select I have a network - continue
    - select join the network wirelessly - continue
    - select my network from wrt54g
    - select security
    --I have tried the 40bit with the wrt54g 64bit WEP
    --I have tried 128bit WEP on both
    ---neither works...if I try something else I need details on how to set it up
    - continue and wait for when it restarts....
    - If I leave the ethernet cord in, and switch back to the wrt54g wireless network, the airport express shows up in the airport utility very quickly. and seems to work for a while before taking my wireless network down.
    - If I remove the ethernet cord and switch the macbook over to the wrt54g wireless network, the airport express never shows up in the airport utility and the airport express flashes amber. From the manual, this says there is connectivity issues. And through process of elimination, looks like the airport express can't get passed the security with the wrt54g.
    So, I too, look for assistance.
    PS. I have had the wrt54g for a couple of years and have not upgraded firmware so if that is necessary then I can do that.
    PSS. At the very first airport express setup there was a new firmware loaded. Does this have to be re-applied if the airport express is hard reset (ie, paper clip in the reset hole for 10 seconds)?

  • Exporting audio and video together for Mpeg2 dvd

    Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed  multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

    To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • WMP54GS and WRT54GS = dropped connections

    I have had the WMP54GS and WRT54GS setup for around 2 years now. I have version 2 of the router, and everything has been fine up until a couple weeks ago. Lately I have been getting randomly dropped from the router. I already have the latest firmware for the router, and have tried changing the channel, and the operating mode to G only, but nothing helps. Sometimes drops occur ever few minutes, sometimes they are so constant that I cant even connect at all. I will refresh my network list and the network will not show up for a few seconds, and then it will, so I will try and connect and it will say Unable to connect.
    Sometimes when I refresh the network list and it will show my network like 4 times... like this
    SSID
    SSID 1
    SSID 2
    SSID 3
    I have SSID broadcast off if that makes any difference...
    I have no idea what is going on, is this a problem with the router or the network card? What should I do? thanksMessage Edited by jls1986 on 05-03-200709:38 AM

    First of all, give your network a new unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router.  Also, do not use your old SSID.   Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    After you have completed the above stuff, then go into your computer, to your "Preferred Networks"  (sometimes called "Profiles" ) and delete all networks named "linksys", also delete all entries with your old SSID.  While you are there, delete any network that you don't recognize, or that you no longer use.  Add your new network with your new SSID, encryption method (if any), and key (if any).  Reboot your modem, router, and computer.  Then try to connect to your new network.  Once you have connected, return to "Preferred networks" and set your computer to connect to your new SSID automatically.  If you have an option that says, "Connect to any available network", turn it off.
    If you are running any peer-to-peer (P2P) software (BitTorrent, Ares, etc.), this is known to cause disconnection problems.  Go into the P2P software and reduce the number of connections that the software can make.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Hope this helps.
    Message Edited by toomanydonuts on 05-04-200705:02 AM
    Message Edited by toomanydonuts on 05-04-200705:05 AM

  • Using Struts and JSTL together

    I have
    <html:form action="xy.do">
    <c:set var="name" value="shalik"/>
    <html:text property="name" value="<c:out value="${name}"/>"/>
    </html:form>
    How could I put data stored in ${name} to show in the text
    Also, is there a shorter way to access java variables using jstl core
    I would not want to do
    <input type="text" name="name" value="<c:out value="${name}"/>"/>
    which works, because I have to use struts

    No you can't include tags as attributes to other tags.
    Yes, you can definitely use the Struts and JSTL together.
    If you want to use EL expressions with the struts tags, it depends on your server.
    If you have a JSP2.0 container (eg Tomcat 5) its no problem at all. You can use the EL expressions directly with the standard struts tags.
    For a JSP1.2 container, there are specifically written struts-el tags. They let you use EL expressions instead of <%= %> expressions
    <c:set var="name" value="shalik"/>
    <html:text property="name" value="${name}"/>The struts-el tags only have a subset of the struts tags. It is intended for use with the JSTL. For instance the c:if tag easily replaces a lot of the logic conditional ones (equal, lessThan, etc etc)
    The tags are available as part of the standard struts download in the contrib directory.
    However for what you seem to be wanting to do, wouldn't it be more struts-like to have an action that specifically populates the action form, and just have
    <html:text property="name"/>
    The value would then be automagically populated from the form bean.
    Hope this helps,
    evnafets

  • Using swingworker and invokeLater together

    Hi all�
    Anyone knows if there is an appropiate way to use the worker thread through SwingWorker and invokeLater together?
    It maybe sounds a bit weird but I have to launch a thread from EDT with invokeLater utility, otherwise i'd get a block state between EDT and my own thread. In other hand, I need to use SwingWorker utility for try to avoid the awful effect of loosing the visual desktop while transaction is proccesing.
    Obviously, if i use SwingWorker and inside doInBackGorund method, launch my thread with invokeLater it doesnt make any sense since the worker do its work in differents threads...
    I'd appreciate any help concerning this problem.

    Hi Albert,
    I believe that this code might help:
    /*SwinWorker Clas*/
    package swingworker;
    import javax.swing.SwingUtilities;
    * This is the 3rd version of SwingWorker (also known as
    * SwingWorker 3), an abstract class that you subclass to
    * perform GUI-related work in a dedicated thread.  For
    * instructions on using this class, see:
    * http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html
    * Note that the API changed slightly in the 3rd version:
    * You must now invoke start() on the SwingWorker after
    * creating it.
    public abstract class SwingWorker {
        private Object value;  // see getValue(), setValue()
        private Thread thread;
         * Class to maintain reference to current worker thread
         * under separate synchronization control.
        private static class ThreadVar {
            private Thread thread;
            ThreadVar(Thread t) { thread = t; }
            synchronized Thread get() { return thread; }
            synchronized void clear() { thread = null; }
        private ThreadVar threadVar;
         * Get the value produced by the worker thread, or null if it
         * hasn't been constructed yet.
        protected synchronized Object getValue() {
            return value;
         * Set the value produced by worker thread
        private synchronized void setValue(Object x) {
            value = x;
         * Compute the value to be returned by the <code>get</code> method.
        public abstract Object construct();
         * Called on the event dispatching thread (not on the worker thread)
         * after the <code>construct</code> method has returned.
        public void finished() {
         * A new method that interrupts the worker thread.  Call this method
         * to force the worker to stop what it's doing.
        public void interrupt() {
            Thread t = threadVar.get();
            if (t != null) {
                t.interrupt();
            threadVar.clear();
         * Return the value created by the <code>construct</code> method.
         * Returns null if either the constructing thread or the current
         * thread was interrupted before a value was produced.
         * @return the value created by the <code>construct</code> method
        public Object get() {
            while (true) {
                Thread t = threadVar.get();
                if (t == null) {
                    return getValue();
                try {
                    t.join();
                catch (InterruptedException e) {
                    Thread.currentThread().interrupt(); // propagate
                    return null;
         * Start a thread that will call the <code>construct</code> method
         * and then exit.
        public SwingWorker() {
            final Runnable doFinished = new Runnable() {
               public void run() { finished(); }
            Runnable doConstruct = new Runnable() {
                public void run() {
                    try {
                        setValue(construct());
                    finally {
                        threadVar.clear();
                    SwingUtilities.invokeLater(doFinished);
            Thread t = new Thread(doConstruct);
            threadVar = new ThreadVar(t);
         * Start the worker thread.
        public void start() {
            Thread t = threadVar.get();
            if (t != null) {
                t.start();
    /*TestSwingWorker*/
    package swingworker;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class MyApplication {
        public static void main(String[] argv) {
            final JFrame f = new JFrame("Test SwingWorker");
            /* Invoking start() on a SwingWorker causes a new Thread
             * to be created that will run the worker.construct()
             * method we've defined here.  Calls to worker.get()
             * will wait until the construct() method has returned
             * a value (see below).
            final SwingWorker worker = new SwingWorker() {
                public Object construct() {
                    return new ExpensiveDialogComponent();
            worker.start();  //new for SwingWorker 3
            /* The ActionListener below gets a component to display
             * in its message area from the worker, which constructs
             * the component in another thread.  The call to worker.get()
             * will wait if the component is still being constructed.
            ActionListener showSwingWorkerDialog = new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    JOptionPane.showMessageDialog(f, worker.get());
            JButton b = new JButton("Click here to show component constructed by SwingWorker");
            b.addActionListener(showSwingWorkerDialog);
            f.getContentPane().add(b);
            f.pack();
            f.show();
            //The following is safe because adding a listener is always safe.
            f.addWindowListener(new WindowAdapter() {
                public void windowClosing(WindowEvent e) {
                    System.exit(0);
    class ExpensiveDialogComponent extends JLabel {
        public ExpensiveDialogComponent() {
            super("This is the world's most expensive label.");
            try {
                Thread.sleep(10000); //sleep for 10 seconds
            } catch (InterruptedException e) {
    }Hope it helps!

  • Using Airport And Ethernet Together

    Having read Christopher Breen's solution to using Airport and Ethernet together,
    http://www.macworld.com/weblogs/mac911/2006/10/airportswitch/index.php
    I am still wondering if this can apply to my situation. I have an Airport Exteme BS distributing the wireless signal on it's own node. Nothing is physically connected to the BS except an ethernet cable running to a hub which is connected to the cable modem. While my ISP service isn't supplying service faster than Airport will manage, no problem...but, I would like to have the advantage ethernet networking between my machines for all the advantages that ethernet speed can bring to that situation.
    My connection to the internet is from WAN from the cable modem. I have an ethernet connection from the BS that I can run a cable back to say, an iBook. Will this work? I want wireless internet, but ethernet for machine to machine networking.
    JAL
    iBook G3/500 G4/Dual 450 Mac OS X (10.4)
    iBook G3/500 G4/Dual 450 Mac OS X (10.4)

    Helpful response, but I am uncertain this is what I am after. First, the hub is at the other end of the house, inconvenient to run a cable to it in this way. Presently, "Distribute IP Addresses" is turned off. This is way it had to be set since the AEBS is on a separate node. I just wonder why I can't run a cable from the AEBS LAN port back to the iBook. Looking for best possible speed when networking from my studio G4 while keeping the wireless internet setting.
    Any reason making the config the way I am imagining will not work?

  • Can't drag audio and video together?

    I have numerous assets in this dvd project. I'm setting up a button to play 10 commercials in a row, a "play all" button.
    I'm editing the 10 commercials in what looks like a mini-video editor, with the video track and audio tracks shown.
    PROBLEM:
    When I grab the video to change the order of my "play all", the audio doesn't move with it. For instance, I'm shifting commercial #3 to become commercial #1. In order for Audio from Commercial #3 to become audio for commercial #1, I have to shift audio #2-10 over to the right to create space for Audio Commercial #3 to insert there. VERY FRUSTRATING and painstaking. And if you accidentally clip a bit off the end or front of an audio portion (easy to do in these tiny little tracks), the sync' is off for the rest of the spots!
    I called Apple "tech support", and the rep' told me you can't drag audio and video together, and made up some excuse about 'this should already be done in Final Cut'. What? I'm just bringing in QuickTime files as assets. Why can't I lock audio and video together?
    Incidentally, Apple's Tech Support is useless you spend $199, or "$799 for a year". This cost was NOT made clear in the original purchase of the product. I'd prefer spending $1000 for a "PROFESSIONAL APPLICATION" and have good tech support included!
    Arrrrgh!
    G4 dual 1.25 gig - 1 gig ram   Mac OS X (10.3.8)   DVD Studio "Pro" 4

    Once in the track, A and V don't get moved together.
    I usually just rebuild the track order from scratch anyway because you can easily lose sync easilly when you are shuffling clip order.

  • Set as available and not appearing as such

    Hi
    I complain that my son and grandchildren never call for iChat while my son complains that I am never available when they call. My computer is always on, iChat has been always on for some weeks now. My son never appears in my Buddy list as at his computer. Are we just missing each other? I have set energy saver for computer and screen to 'never sleep' and so I do it manually when I leave the computer. Screen saver seems to be unstoppable - could that make a difference? Why does he think I am not there? When we are lucky and coincide we can talk and see each other quite well, so it can work, that I know.
    He runs Leopard on a new Mac Book ( think it is).
    You could save our relationship if you can solve this one for me!
    Best wishes
    Ynys

    There are several possibilities here.
    1) You have an AIM name and he has added you as an @Mac name.
    2) The reverse. (both in names and ends)
    3) a straight forward misspelling of a Screen Name.
    4) The names have become Blocked. (Check: iChat > Preferences > Accounts > Security tab and the list with the Edit button)
    You seem to be saying that he is not in your Buddy List (As an Online person) Check Blocking and spelling and type of Account/screen Name you have him set as.
    You can do this by highlighting his name in the Buddy list and using the Apple Key and i together (Get Info) and looking at the Address card tab).
    In addition you seem to say that you do appear in your son's Buddy List but he never sees you as Available and this seems to be the Screen Saver/Sleep feature possible showing you as Away.
    It sounds as if two things are happening.
    Your computer is showing you as away.
    You have added him as the wrong Buddy Type or misspelt his Screen name.
    3:35 PM Saturday; April 5, 2008

Maybe you are looking for