Setting up web Bex in BWsystem:error com.sap.mw.jco.JCO$Exception:Issuer of

Dear SAP Gurus,
I'm facing an error when seting up web Bex in BW system which is based on AS java patch 14 when i run Diagnostics & Support Desk Tool as described in Note 937697  there is only one red signal which is BI Mastersystem
the error is
RFC connection using properties in Portal System Landscape to ABAP backend has failed. Reason:
com.sap.mw.jco.JCO$Exception:Issuer of SSO ticket is not authorized
thanks in advance
Rgds
George Varghese

thanks Deepika ,unfortunately I posted this a Long back ,time limit was very less ,we were not in a situation to do more R&D on that,it will be a Waste of time ,what I did is that I uninstall ed SAP and installed again with latest available Patches and we were succeed
thanks
George Varghese

Similar Messages

  • Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException

    Dear All,
    please help me, now i'm facing some problem when running BEX broadcaster to generate HTML file in BW Portal,
    every time i rum BEX Broadcaster for schedule, it will took very long running time (+- 3600 second) with no file HTML generated
    when i check to tcode rsrd_log :
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Message no. RSBOLAP014
    is any one have any solution for my problem..
    Thanks
    -Luqman

    Hi Luqman,
    Since issues with Message no.: RSBOLAP are basically JAVA Configuration issues, I would suggest you to run the SAP NetWeaver BI Diagnostics & Support Desk Tool as described in Note 937697 to verify your installation.Please use the Latest version of this NOTE. In the "Advanced mode" of the tool, go to the "Configuration checks" tab and check for potential red traffic lights. To resolve the issues shown there, check the "Remedy" column and follow the instructions given there.
    Also do implement all the correction instructions attached to the NOTE.
    Also to avoid encountering already known issues within the area of BI Java itself, make sure to deploy the latest patches for SCAs BI-BASE-S and BIWEBAPP.
    Also you may refer NOTE 917950 ('SAP NetWeaver 2004s: Setting up BEx Web') .
    Hope this info helps you with the issue.
    Kind Regards,
    Robin.

  • FPN error: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

    Hi, all.
    I am trying to initiate a webdynpro page from the producer to the consume portal via RDL. It works fine for a day. Then it starts giving me the error:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page ...
    This error cannot be cleared by clearning the FPN cache or synchronize with the producer. Of course, you can also delete the page from the consumer and copy it over from the producer again. It will work. But this is not a good workaround for a production system. We also don't know the cause either. Here is the stack trace:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:528)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.portal.fpn.exception.unchecked.FpnUnMarshallingException: Could not find a marshaller for 'com.sapportals.portal.page' from path 'pcd:consumer_content/DEP/portal_content/ca.ottawa.sap.supportcentre/ca.city.ottawa.OttawaRoles/ca.city.ottawa.ManagerInfo/ca.city.ottawa.ManagerInfo-FinanceOnly/ca.city.ottawa.ManagerInfo_MSS_Finance/ca.city.ottawa.Mileage_Parking_Managers'
         at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:323)
         at com.sap.portal.fpn.entrypoint.RuntimeFederatedPersistance.retrieveDLRemoteState(RuntimeFederatedPersistance.java:103)
         at com.sap.portal.fpn.FpnRuntimeService.bringRemoteState(FpnRuntimeService.java:134)
         at com.sap.portal.fpn.FpnRuntimeService.doFpnLookup(FpnRuntimeService.java:97)
         at com.sap.portal.fpnprovider.fpn.GenericContext.lookup(GenericContext.java:49)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:526)
         ... 31 more
    Caused by: com.sap.portal.pcm.OperationFailedException: Creating DL outside the PCD
         at com.sap.portal.pcm.iviewserver.CiViewSLObjectsManager.instantiateDescriptor(CiViewSLObjectsManager.java:687)
         at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:79)
         at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:71)
         at com.sap.portal.fpn.marshal.IViewMarshaller.instantiateRelatedItemDescriptor(IViewMarshaller.java:582)
         at com.sap.portal.fpn.marshal.IViewMarshaller.performSemanticActions(IViewMarshaller.java:506)
         at com.sap.portal.fpn.marshal.PageMarshaller.performSemanticActions(PageMarshaller.java:499)
         at com.sap.portal.fpn.marshal.IViewMarshaller.unmarshalResolvedDLChain(IViewMarshaller.java:715)
         at com.sap.portal.fpn.marshal.PageMarshaller.unmarshalResolvedDLChain(PageMarshaller.java:328)
         at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:320)
         ... 38 more
    So far I found nothing on OSS or SDN on this FpnUnMarshallingException. Has anyone seen this error before?
    Thanks.
    Jonathan.
    Edited by: Jonathan Ma on Apr 23, 2009 12:25 AM

    Hi Jonathan,
    you may deactivate the GPN cache as well as the old navigation cache. About the GPN there is note 1172433. Both caches are not used in FPN scenario and can lead to such strange problems. If this won't help please open a support message for this that we can analyse further.
    Cheers,
    Anja

  • ERROR:com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException

    Dear All,
    We have taken a par file from another project and deployed in the J2EE engine using SDM.It was succesfully deployed with out any warnings.I have created an iview also.When we are trying to access that i view i am getting an error as follows:
    500   Internal Server Error
    Web Dynpro Container/SAP J2EE Engine/6.40
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
        at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
        at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
        at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
        at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
        at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
        ... 51 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type     HTML Client
    User agent     Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
    Version     null
    DOM version     null
    Client Type     msie6
    Client Type Profile     ie6
    ActiveX     enabled
    Cookies     enabled
    Frames     enabled
    Java Applets     enabled
    JavaScript     enabled
    Tables     enabled
    VB Script     enabled
    Server
    Web Dynpro Runtime     Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Mon Mar 03 21:11:10 GMT+05:30 2008
    J2EE Engine     7.00 patchlevel
    Java VM     Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
    Operating system     Windows 2003, version: 5.2, architecture: ia64
    Session & Other
    Session Locale     en
    Time of Failure     Thu Apr 10 14:31:31 GMT+05:30 2008 (Java Time: 1207818091497)
    Web Dynpro Code Generation Infos
    local/WDHolidayCalendar
    SapDictionaryGenerationCore     7.0009.20060802115015.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:24:21[UTC], changelist=413123, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates     (unknown)
    SapGenerationFrameworkCore     7.0009.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:12:57[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer     7.0009.20060802115035.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:30:00[UTC], changelist=413124, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon     7.0009.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:13:46[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore     7.0009.20060210160857.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:13:38[UTC], changelist=388995, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary     7.0009.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:21:59[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro     7.0009.20060428190938.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:26:52[UTC], changelist=400815, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates     7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:45:29[UTC], changelist=413534, host=pwdfm101)
    SapWebDynproGenerationCore     7.0009.20060802115035.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:30:11[UTC], changelist=413124, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates     7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:45:29[UTC], changelist=413534, host=pwdfm101)
    sap.com/tcwddispwda
    No information available     null
    sap.com/tcwdcorecomp
    No information available     null
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type extern:com.bel.holidaycal.model.types.WDModelHolical:com.bel.holidaycal.model.types.Zhrt029 could not be loaded: com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:305)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:234)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:448)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:386)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:415)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:79)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:121)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:117)
         at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:212)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.dictionary.runtime.DdException: Type com.bel.holidaycal.model.types.Zhrt029 does not exist
         at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
         at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
         at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
         at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
         at com.sap.dictionary.runtime.DdBroker.getStructure(DdBroker.java:180)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:303)
         ... 49 more
    I have created the JCO connections also ,i am able to test them also.I have imported the same into NWDS and deployed the application , its deploying but the out put is the same error.
    I have cross checked the models and found that the Model is there in the model types.
    Can any one help me regarding this.
    Waiting for the response ASAP.
    Thanks
    Ravi.S

    Hi,
      I think you mean ear file and not par file. Check these threads. The exception is mentioned to be because of JCo problems only.
    Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
    WDTypeNotFoundException: type model.types.Zbtr_Wbselement could not be load
    WebDynpro using BAPI has an error
    Regards,
    Harini S

  • Error : com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

    Hi
    Just got the portal EP7.0 configured to my already existing HCM server ECC6. But on clicking any link i get this error :
    Application error occurs during processing the request.
      Details:   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'sap.com/mss~pcr' since it is not a Web Dynpro object.  The ID of this error is
    Exception id: [001517258E860068000000B2000019D80004627960F883DF].
    I searched the forum but could not get a solution though mnay have faced this problem. This is for all applications and not only PCR.
    Thanks and regards
    Pamela

    Hi,
    Check JCO destinations are active?
    check the below link for further investigation
    http://help.sap.com/saphelp_nw04/helpdata/en/1f/1b1041a0f6f16fe10000000a1550b0/frameset.htm
    Koti Reddy

  • Com.sap.xss.config.FPMEonfiguration.Exception: Read of object error

    Hi Experts,
    I have done the technical config of ESS on EP (mySAP ERP05) and using my id (portal admin) i can view the who's who section of ESS.
    But when i log in with the test ess user ESSUSER, then i get the error:
    com.sap.xss.config.FPMEonfiguration.Exception: Read of object error
    Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication)
    1. I have assigned READ permission with END USER tick for EVERYONE group in portal for ESS ROLE
    2. I have assigned EMPLOYEES to the USER and assigned the required composite role and the authorization for S_SERVICE and S_RFC
    The PORTALADMIN user and the ESSUSER user in the portal have exact authorizations in the backend. Still the error persists in ESSUSER.
    Can someone advise.
    Regards,
    Shobhit

    Hi Shobhit,
    Give EVERYONE READ access with END USER on the following folder in PCD.
    Portal Content -> Content Provided by SAP -> srvconfig
    Hope this helps
    Akhilesh

  • Com.sap.ip.bi.sdk.exception.BIResourceException: OLAP

    hi experts ,
    i am able to connect to SAP system but the olap operations are not supported
    my code :
    ManagedConnectionFactory mcf;
    IConnectionFactory cf;
    IConnectionSpec cs;
    mcf = new SapqManagedConnectionFactory();
    cf = (IConnectionFactory) mcf.createConnectionFactory();
    cs = cf.getConnectionSpec();
    cs.setPropertyValue(SapqConnectionConstants.USERNAME.toString(),"*******");
    // Password
    cs.setPropertyValue(SapqConnectionConstants.PASSWORD.toString(),"*******");
    // CLIENT
    cs.setPropertyValue(SapqConnectionConstants.CLIENT.toString(), "000");
    cs.setPropertyValue(SapqConnectionConstants.APPLICATIONSERVER.toString(),"131.x.x.x");
    cs.setPropertyValue(SapqConnectionConstants.LANGUAGE.toString(),"EN");
    cs.setPropertyValue(SapqConnectionConstants.SYSTEMNUMBER.toString(),"00");
    IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs);
    System.out.println(connection.toString());
    getting the connection object working well till here
    IBIOlap olap = connection.getOlap();
    the above statement i am setting an error com.sap.ip.bi.sdk.exception.BIResourceException: OLAP connections are not supported
    Thanks,
    satish

    I've got the same problem/message. What is the solution?

  • Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

    Hi Experts,
    We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
    Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
    Can anyone let me know how to fix the issue or what needs to be done?
    Your help is highly appreciated.
    Regards
    Faisal

    Hi,
    It seems to be problem with permission of files. Please ask your basis to do following:
    1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
    2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
    3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
    Regards
    Aashish Sinha

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • File to File-CC 'error com.sap.aii.adapter.file.ftp.FTPEx: 550 Access deni'

    Hi friend,
    I am doing file to file scenario in which i wan to move one file from input folder to output folder.
    I had created as FTP on one system that i am able to access and have full authorization to read and write.
    and created that two input and output folder in it,n kept an xml file in input folder.
    When i see sender communication channel in RWB it is showing error, "com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied'
    I checked password,it correct also I tried to test it using Anonymous Login, but the same things.
    SO i am not sure where i had done mistake.
    Plz give ur suggestions.
    Thanks

    Hi,
    Please Check below few steps:
    Check if the username and the Password is created to write the file in the desired directory.
    Check the username is provided the authorization to write the file in the desired directory. ... IS Guys will help you..
    Confirm if the directory created have all the authorization to write the file.
    ls - lrt
    chmod 777 Directory Name
    all the authorization will then be provided
    Confirm if the directory is created with the root id then it there might be some problem with the user name u r trying to create..
    Hope this will help.
    Assign points for helpful answer..
    Thanks
    JAY.

  • Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException:

    Good day,
    I did a FILE-RFC-FILE scenario and my file sender adapter returns the error "Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId".
    I got hold of blog with the similar error(JDBC - Sender adapter Weird Issue), with a suggestion to deactivate the comm. channels, do a full  cache refresh and restart the comm. channels. I did all that but still getting the same error.
    Your assistance will be higly appreciated.
    Regards,
    Charmaine

    Hi,
    Not very sure but this could be due to wrong configuration of CC or adapter may got locked.
    Check for the same in Visual Admin under
    Cluster Tab -
    > Locking Adapter
    If it has got locked then you can reset it here.
    Regards,
    Sarvesh

  • Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGR

    Hi all,
    I am currently doing a File --> RFC --> File synchronous interface ( I am not using RFC lookup functionality here ).
    I am doing this scenario according to the following Wiki link,
    [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)]
    When testing the interface, i am getting an error "Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:" in the sender communication channel. I don't have any idea about this error, could anyone help me in this issue.
    Cheers,
    Sherin Jose P

    Hi Sherin Jose P,
                                Please recheck your Integration Directory configuration for the scenario. Specially please check inbound interface determination settings. Here the communication channel is unable to find the interface mapping after receiving XML message. Did you use java mapping ? then please check the code again since it might not be producing exact target xml structure. Finally please ensure all mapping programs are existing and activated. If all mapping are activated then refresh the cache.
        Please check  in st22 transaction all errors in PI, whenever you get this message. There may be other reasons of error as well. There can be occasional short dumps due to data lengths or validations in ABAP programs. These short dumps in ERP may cause failures raised in PI.
    Finally if there are some exception in mapping then this error you can expect.
    Hope this helps.
    regards
    Anupam

  • Com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

    Hi All Experts,
    In Employee Self Service i am Getting this Error,overview page is also not displayed.
    The initial exception that caused the request to fail, was:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
    ... 60 more
    Regards
    Anumit

    I have seen this funny error message crop up time and again. Though only for particulaer set of users only.
    When developing cuetom applications you will have to do register the BLC compeonent as mentioned in the documentation below. If you dont register you are sure to get this error
    http://help.sap.com/erp2005_ehp_04/helpdata/en/43/42b7eb8eba2a21e10000000a422035/content.htm
    You should not get this error for standard applications as the BLC is always registerd as mentioned in the above documentaion
    But when ever I got this error for standard applications, restarting the browser of the end users or in extreme cases the portal server resolved this issue. Fortunately I never got this error in production

  • Cannot access WebDynpro application:com.sap.tc.webdynpro.services.exception

    Hello gurus!!
      I am trying to access the "Emergency address" from the LWE and I am getting this error "Cannot access Web Dynpro application: com.sap.tc.webdynpro.services.exceptions.WDException$DummyLocalizableTextFormatter@76829226". Could anybody please suggest what could be wrong with this action "Emergency Address"?
    Thanks much for your help with this,
    Maria Kutty Somori....

    Hi Yugandhar/Siddharth,
       Emergency address is the standard callable object for Execution that is part of the Standard Life and Work events. I have customized to reorganize the actions depending on our requirements and i have created a different folder structure and different order of execution of callable objects.
    How do I fix this "cannot access Webdynpro application" error? Please suggest.
    Thank you so much,
    Maria Kutty Somori.....

  • Com.sap.caf.mp.base.exception.EngineException: Problem in server response:

    Hi,
    I have created one CAF application,which is having one external webservice and one application service.Webservice takes two input parameters(string,boolean) and it returns an arraylist.
    So when i test the CAF application on the CAF service browser it is giving me error like " com.sap.caf.mp.base.exception.EngineException: Problem in server response: [Bad Request]."
    I am getting this error while creating object of web service.
    Can anybody help me on this issue..
    Thanks in Advance

    It looks like you are not authorized to execute the webservice. Check the webservice authentication settings.
    Peter

Maybe you are looking for

  • Adobe Document Centre

    Hi, I'm having real problems as the users of my documents cannot open them becuase the dc.adobe.com site is down. However I've set the documents to be usable for 3 days offline but this doesn't appear to be working. I'm using Windows XP Pro, Office 2

  • RFC is to be created in ECC that should fetch the data from CRM

    Hi Gurus, I am facing with a problem in knowing the fields and table to develop an RFC in ABAP. My exact requirement is : ABAP :  the field PERNR is passed as exporting parameter  to RFC and imporitng paramter is an internal table that consists of  

  • LINGUISTIC index not being used when it should be - why?

    We have Oracle 10g R2 and using the case insensitve feature within the database. We have 2 schemas, one called 'app' and the other 'crs'. The crs schema owns the all the tables, views etc and has granted select on its objects to schema app. We have a

  • ORA-00001 When I try and create an interactive query/report

    Interactive report in APEX 3.2 I have a query like this that does a country lookup based on the physical address and the mailing address. The query executes fine through SQL plus but when I try and create an interactive report I get ORA-00001: unique

  • Okidata printer won't work

    I have the G5 Quad and OS 10.5 and am trying to use my Okidata c5150n laser printer. I have downloaded and installed the driver and have added it to the available printers. But when I try to use the printer, my G5 says that the file is printing, but