Setting up Wirless Printer

Hi I need some help. I just got a new Epson Artisan 710 which prints wirelessly but I can't seem to get it to do just that. I have everything setup on the printer but I don't know what i'm supposed to do on my mac to make it work. Do i need to use Bonjour? if so, what is that and what do i do?
Thank you.

Assuming you've followed your printer's installation guide, when you go to system preferences>print and fax, click on the little + button below the printers list on the left side. When you do that, does your printer show up in the new Add Printer window that pops up? It may take a moment to appear in the list.

Similar Messages

Setting up a Printer over Wirless Network

I have a MacBook Pro and a Old G4 Mirror Door connected to a Linksys Wirless Router in my home. I only have one phone jack in my house and its in the kitchen.:( So I put an Airport card in the G4 so I could have my computer in my office. I have a hp Deskjet 3650 connected directly to the G4 via USB. What I'm wondering is.. is there a way that I can print to this printer from my MacBook Pro over the network? Or does the printer have to be connected directly to the wirless router?
Hope someone can help.
Cheers,
Adam
17' MacBook Pro Mac OS X (10.4.6)

You certainly can set up a printer this way. Go to the Print & Fax preference pane in the System Preferences. Click on the Sharing tab, enable "Share these printers with other computers", and make sure that the check box next to your printer is checked.

Wirless Print Servers with Mac and Windows

I am very new to mac..macbook purchased just this week..facing some challenges but learning at the same time..I have my macbook running thru my wireless network on a Motorola SB4100 Cable modem, D-Link DI 614+ Wirless Broadband router and a d-link DPR-1260 Wirless Print Server..previously I have been using a Windows Laptop..I guess it seems that D-Link print servers are only for Windows systems??? I looked at the manual and it doesn't mention Mac..haven't been able to figure out how to add a prt to the mac and I guess that is why?...you need a seperate print for the mac with it's own wirless prt server? or can you replace the cable modem and router with some apple base station that does everything but then can windows laptop work on the network and wireless prt??
scott

I doubt you need any additional equipment. It should be a matter of setting up using PrinterBut posting your question in the Tiger- Printing & Faxing forum area may get you a faster answer.
http://discussions.apple.com/forum.jspa?forumID=756
It should be a matter of setting up in Printer Setup Utility using the ip address of the server.

How do I set up my printer to only print in black?

how do I set up my printer to only print in black?

Please read this post then provide some details. What printer model? What operating system? Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver.
Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty. There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Scheduled Delivery- Printer display 'you have not set up this print app'

If you add a Scheduled Delivery print app to your printer through the ePC without selecting a delivery schedule, when you go to confirm on printer and perform a 'Print Now' you will see a message on the display “You have not yet set up this print app. Please to go to www.hpeprintcenter.com to setup your delivery. Press OK to print a sample copy.”
If you wish to only have the print app as a 'print now' with no deliveries scheduled, you will see this message everytime you perform a print now.
If you wish to have the print app setup as a scheduled delivery then go to the ePC, select the print app, and setup a scheduled delivery.
Although I am an HP employee my posts and replies are my own.

If you add a Scheduled Delivery print app to your printer through the ePC without selecting a delivery schedule, when you go to confirm on printer and perform a 'Print Now' you will see a message on the display “You have not yet set up this print app. Please to go to www.hpeprintcenter.com to setup your delivery. Press OK to print a sample copy.”
If you wish to only have the print app as a 'print now' with no deliveries scheduled, you will see this message everytime you perform a print now.
If you wish to have the print app setup as a scheduled delivery then go to the ePC, select the print app, and setup a scheduled delivery.
Although I am an HP employee my posts and replies are my own.

How to set up Canon printer via Netgear print server ps121 on new macbook

I have bought a new Macbook (OS10.4.8). The Apple store gives a good deal if you buy a Canon ip4300 with it but I am having problems figuring out how to set up the printer to work thru my Netgear print server on my Netgear network. Can anybody advise:
1. I know my print server is on port 192.168.1.5, but what kind of settings do I use, IPP or LPT or something else?
2. Why can I not find the driver for the ip4300, even though I have used the CD that came with the printer and run the install program and the printer DOES work when I plug it directly into the USB port. Why does the Macbook come with drivers already installed for only a few ancient BJ Canons and why won't it show me where the driver for the ip4300 is since it is obviously already on the machine?
I know Netgear treats its customers with contempt (Linksys even worse). But I would expect a little more simplicity from Canon and Apple. I know I am an orangutan but it still seems incredibly difficult, as if they have hidden the printer driver on the computer and as if Apple does not want you to install networked printers. Please don't tell me to RTFM, I have read the Canon manual, it tells you how to network with Windows, does not even mention Mac. Any advice appreciated.
Macbook Mac OS X (10.4.8) Netgear PS121, Netgear WGT624v3 router, Canon ip4300 printer

Hi zoevancouver,
If you are not able to set up your Canon MP460 printer, take a look at the article below. There is a link to the Canon website and compatible printers. Since this particular model is not on the list, you may need to contact Canon for additional support.
OS X: Printer and scanner software available for download - Apple Support
https://support.apple.com/en-us/HT201465
Regards,
- Judy

How do I set up the printer default so that it prints black only, with all my devices and iMac

Have an Officejet 8600 Plus, used with an iMac. Also using wireless feature to print from iPads and iPhones. The printer has been setup from the iMac to print using the black ink cartridge, only. The problem is with my devices. I am unable to figure out how to set up the printer to print in black when I print from my devices. Is there a solution to this?

Hi symo46, welcome to the HP Forums. I understand you are trying to determine how to print with black ink only from your iPad. As you may have experienced using Airprint you will not have any options other than number of copies, however the HP ePrint App may have the option you are looking for.
When printing from the HP ePrint App, if you are printing Office documents or PDFs you can use black ink only.
Getting Started with ePrint
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How do I add a mobile device to an already set up wireless printer.

Hw do I add a mobile device to my all ready set up wireless printer, I have the C410A all in one printer.

Hi,
The printer is connected directly (wireless) to other device or thru the Network ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I set Firefox to print to PDF, the only otions I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

A couple of weeks ago, from the file menu, in my print options was to print a web page to PDF, that facility is no longer there. does anyone know how can I set Firefox to print to PDF.
The only options I have are (1) My Canon printer, (2) Fax or (3) Microsoft XPS document writer. There is no option for PDF

Firefox generally displays the printers in Windows' Printers folder (Start orb > Devices and Printers). If it is missing one of the printers listed there, could you indicate which one it is, for example, Adobe Distiller, PrimoPDF, CutePDF Writer, etc.?
If you previously had an add-on which added print-to-PDF functionality just to Firefox, perhaps it got disabled. You could check here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions
Also, are you really running Firefox 8.0.1? That version from last November is no longer secure and has been superseded by Firefox 11. If you browse the web widely, you should update for your security.

How do I set a noise print for the entire track? (Back to Basics)

Ok. I've only worked in STP with single audio clips. Now, I'm trying to adjust audio inside a Multi-Track project sent from FCP... and it's a little different. At least to a guy like me.
I'm struggling with the most basic issue, and that's possibly why I can't find an answer to it.
Simply, "How do I go about setting a noise print for an entire track?" I've done this for a single audio clip, but now that I'm in a slightly different environment my old ways don't work. I've looked through video tutorials hoping to find something but no luck.
Any help is greatly appreciated!
JS

With the audio opened in SoundTrack Pro, select (highlight) a small portion that only contains the noise that you want to reduce. Sample that section. then select the entire audio clip and use the Noise Reduction tools to reduce the noise that you sampled earlier.
-DH

Setting up IP Printing for HP Laserjet 6MP

Hello friends.
I hope somebody can help me out as I have spent hours trying to get this solved.
I have an HP Laserjet 6MP, connected to a HP JetDirect Ex Plus print server, and I would like to setup IP printing on it. (I do not want to use AppleTalk printing)
My setup is as follows:
- A home network running from a wired router.
- Another second router connected to the first one (because all the ports are used up), with DHCP disabled on it, providing four more spare ethernet ports.
- The Jet Direct is connected to one port
- My MacBook Pro (OS X 10.5.7) is also connected to another port
I have tried setting up the printer through OS X, using the 'Add Printer' function in the printing preference, and selecting both 'LPD' and 'HP Jetdirect socket' options. Neither appear to work though and I think I am getting the addressing incorrect.
I am getting stuck is the following:
- Not sure how to check that the IP address I am entering for the print server is correct
- Not sure how to test if the printer / print server is actually being recognised on the network
- Not sure if I've missing anything else along the way...
Any help or guidance would be really really appreciated.
Thanks,
G

Wow. After continuing to wrestle with this I worked out the problem. What I needed to do was first reset the print server to it's factory settings. I then printed it's configuration page, by holding down the Test button. This lists all it's details, including the correct IP address. In my case it was 10.1.1.5
I then created a new printer using the OS X printer setup function in the System Preferences. Selected IP Printing > jetDirect, and entered the IP address. From there it just worked. Everything connected and printing perfectly.
A nice end to a Friday.

Directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook

At a new job and looking for directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook.
Can you please help me?

Hello JoeA12345
Welcome to the HP Forums.
I see that you looking for some assistance with setting up the printer on your new notebook.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Solution Center Software ungrad to Windows 7, will not set up the printer in software

After upgrading from Windows Vista to Windows 7. This was a clean reinstall of Windows Vista and then the upgrade was in stalled. I downloaded the new version of the HP Solution Center full and set it up in my computer.
The printer is HP Officejet Pro L7580 and I have set up the print in my control panel as wireless connection and my wireless software for has been upgraded for Windows 7 and the printer is properly connected and printing.
However when I try to set up my printer in the HP Solution Software it will not set up as a wireless connection for my computer.
Does anyone know how to solve this problem?

I get printer c8100 series will not work scanner at hp solution center. Please help me out?

Trouble setting up wireless printing between my Macbook Pro w. Mountain Lion 10.8.1 and my HP C4780 Printer

Hi all,
I'm having a frustrating problem trying to set up the wireless printing between my Macbook Pro 13" to my HP C4780 printer. I had no problem installing and configuring this before on my previous computer, a Macbook. However, when I got my new computer (the Macbook Pro), my wireless network wont show up when I try and install the wireless capability during the printer setup. I had to buy a new router and set up a new network around the time I got my new computer, so I wonder if this has something to do with it. My wireless network is a WPA/WPA2 personal, but so was my old wireless network with the old router and I didn't have a problem installing the wireless. I thought I might not have had the most up-to-date driver for the printer software, but I do. So, i'm stuck! Any thoughts??

Go here and download all the manuals and read them on how to set up your printer.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=3422866&
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do I set up my printer to air print

How do I set up my printer to AirPrint

Review this Apple Support page
http://support.apple.com/kb/ht4356
If your printer supports AirPrint you prettyd much just have to turn it on. Your iPad should find it.
Keep in mind though, that not all Wi-Fi printers support AirPrint. Check to see if your printer is listed in the AirPrint support page.

Setting up Wirless Printer

Similar Messages

Maybe you are looking for