Setting up WPA-Enterprise

Are there any good documents on how to set this up on a 1200 series AP?
Thanks,
John

Take a look at this doc.... might help:
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml

Similar Messages

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.
Thanks for your help!

Choose the strongest security available on your router, preferably WPA2 using AES encryption and a long complex passphrase with at least 14 characters (the maximum is 63 characters).

Why does the WPA Enterprise Wifi Network not get displayed?

I wanted to connect to the wifi of my university via eduroam and was not able to even get the eduroam network displayed in the list of Wifi networks. I'm sure that it was there, because I tried it on several spots and my laptop was always able to find it and connect to it. Could it be that WPA Enterprise is not supported? It's quite standard already, isn't it?
There would be a second option to connect to an open network and add a VPN tunnel, but I could not find any vpn-Application for Firefox OS.
Did I oversee something or is there really no possibility to access any of my university networks?
I am using an Alcatel One Touch Fire (German language set) with current Firefox OS 1.1.0.0-prerelease

It seems to me that WPA Enterprise is not currently enabled in Firefox OS.
There are several bugs regarding this feature, among others: https://bugzilla.mozilla.org/show_bug.cgi?id=790056
Regarding VPN, there is a recent thread, which also indicates that this feature is not currently supported. See the discussion here:
https://support.mozilla.org/en-US/questions/967948
It also lists the bug-id related to this features.

WPA Enterprise for E63

Hi,
I just bought an E63 just to realize that I cannot use it with my work WiFi. My workplace WiFi is WPA Enterprise. Is there an upgrade to the software to support WPA Enterprise
Solved!
Go to Solution.

I suggest you contact your IT department on this matter. Setting up EAP-PEAP is not an easy thing to do. The link is an example of how it can be done.
/discussions/board/message?board.id=connectivity&message.id=25714#M25714
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

WPA enterprise (need to not validate Certificate)

We currently use WPA Enterprise and we require the network to be configed manually to get it to work on a windows 7 pc.
We have to create the Wireless as so:
Network name: XYZ
Security: WPA-Enterprise
Encrypton type: TKIP
Under Properties for network... we need to change PEAP and uncheck Validate server certificate
Either we enable single signon if it's a domain joined PC and tell it to send user info from logged in user...
Or we store user info for non domain joined PC's.
Ok so that's how we get a PC running windows 7 to join the network...
I can't get an Iphone running 3.1.3 or an Ipad wifi model to connect.
Note: the iphone used to work on our network (nothing changed in 1 year)
WE use Cisco Wireless LAN controllers 4400 series and ABG light weight Access points.
How can I manually configure the wifi on an apple product? iphone/ipad

Try using the iPhone Configuration Utility.
http://support.apple.com/kb/DL851 - (for Mac)
http://support.apple.com/kb/DL926 - (for Windows)
It will let you manually select the security type and protocol. It also lets you install certificates and set trust exceptions on the devices.
You can find detailed information about the iPhone Configuration Utility in the Enterprise Deployment Guide, which is available here: http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf

IPad WPA Enterprise connection

I am setting up a bunch of iPads at work and I keep getting "Unable to Join Network" when I try to login to the WPA Enterprise network. I successfully set up about 8, but for some reason I still can't get this one going. I have tried reseting the network settings, reseting the iPad to factory condition... nothing seems to work. Any help would be very much appreciated.

Try updating the WLAN drivers and see if it helps.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015011
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

WPA-Enterprise: WRT54GL or WAP54G or...?

Hi!
I'm planning to implement a WPA-Enterprise network with WPA encryption and 802.1x authentification through a FreeRADIUS server.
It's a requirement that all clients recieve their IP from our central DHCP server.
I'm considering both a WAP54G AP and a WRT54GL (since it's very versatilie with option for 3rd party linux OS and the difference in price is minimal) for this setup, although I'm open to other suggestions.
Anyone have experience in setting up a WPA-Enterprise and FreeRADIUS network, who've perhaps experienced either success or problems with it?
In regard to the WRT54GL I obviously need to disable the builtin DHCP server, but is it possible to achieve the DHCP passthrough while maintaining a IP on the router's WAN port for remote administration?
Kindly,
Thomas

Thanks for that info - I was thinking we had to plug the WAN cable into a LAN port, which I feared might screw around with the connection to the 802.1x authentication service.
Additional question:
Anyone know if roaming between AP's works (flawlessly?) when you're authenticated through 802.1x?

Connecting n96 to WPA Enterprise

Has anyone been able to connect a n96 to WPA Enterprise (TKIP Encryption; PEAP; EAP-MSCHAP v2) WLAN?
thanks.

Not sure what u mean by Enterprise but here is what I got my wireless router set with:
Authentication: WPA-PSK and WPA2-PSK
Encryption: TKIP
Wireless Mode: 802.11b/g
DTIM Period: 3
Maximum Connection Rate: 53 Mbps
I have mine set to a custom pass phrase key.
When I used the WLAN scan on the handset, it found my wireless network very easy then all I had to do was select it then enter the pass phrase key. When I first started my Nokia PC Suite, my router said there was a conflict and placed my N96 with DMOZ Enabled. A quick reboot of the phone then everything working fine.
I have a BT2700HGV router.
Hope this is of some help to you

Does the iPhone support WPA Enterprise?

Hi,
I'm really keen to purchase an iPhone when they appear over here in the UK.
We've just rolled out a wireless network here configured to use WPA Enterprise i.e. no WEP. Our baseline config is WPA/TKIP and after that you use EAP-PEAP/MSCHAPV2 or EAP-TTLS/MSCHAP to authenticate using your university userid and password.
When i was configuring our 802.1X network, the one operating system that beat everything else out there hands down was OS X. It didn't matter if it was wired or wireless, OS X just worked. It was a joy to use ... unlike Windoze.
I sort of assumed that as the iPhone had OS X in the middle it would have the same capabilities as the desktop systems. However, I've heard a couple of snippets saying that it only supports WEP. Is that the case?
It would be a major pain in the a**e if it only supported WEP. While I could set up a separate SSID for an iPhone network I'd really really rather not.
Anyone got any info on the iPhones wireless capabilities?
TIA
Alex

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

HT1338 WHAT IS 802.1 MEANING? HOW CAN I CHOOSE ABOUT OPTION INSIDE BETWEEN 802.1WEP OR WPA ENTERPRISE? WHAT'S DIFFERENT? T

WHAT IS 802.1 MEANING? HOW CAN I CHOOSE ABOUT OPTION INSIDE BETWEEN 802.1WEP OR WPA ENTERPRISE? WHAT'S DIFFERENT?

802.11 refers to a document that specifies how wireless networking works. It goes into detail about the radio signals, frequencies, signal strengths, encoding of data, etc. From a practical standpoint, the typical person really only care about a couple of things: speed and encryption.
802.11b - describes networks that transmit 11 mbps using a 2.4 GHz radio frequency
802.11g - describes networks that transmit 54 mbps using a 2.4 GHz radio frequency
802.11n - describes networks that transmit up to 600 mbps using 2.4 GHz and 5 GHz frequencies
n is faster than g which is faster than b. The speed of a network connection is limited to the slowest part (so, if you have an 'n' router, but your laptop only supports 'g', you get the 'g' speed).
WEP, WPA, and WPA2 refer to data encryption schemes specified in parts of the 802.11 document. With Wi-Fi, you are broadcasting your network activity over a radio, and it's pretty obvious that anyone could eavesdrop on the transmission. By using cryptography, you can scramble the data being passed back and forth so that the sender and receiver still understand the messages sent, but an eavesdropper cannot.
WEP is a very simple encryption scheme, one that the methods to decrypt the data is pretty straight-forward. It's not effective against someone that wants to intentionally eavesdrop on your activities (or access your computer) because they can use software to determine the password simply enough.
WPA and WPA2 are improvements over WEP that make cracking the password even more difficult (WPA2 being better than WPA).
The "enterprise" version of WPA2 refers to a variation on WPA2 that requires special security servers, security certificates, and other complicated systems most likely only applicable to a corporate or military environment. It's impractical for a home or small office.
To connect to a wireless network, you generally don't have to worry about the encryption used since the computer will receive a notice from the wireless network about how it is setup and use the appropriate method. It's probably good for you to pay attention whether the network you are connecting to is secure or not.
If you are setting up a network at home using a cable modem or broadband router, or even just a Wi-Fi access point, you want to set it up to use WPA2 unless you have some very old computers that only support WPA. You should avoid using WEP.

Power Mac G4 won't connect to WPA Enterprise

At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

First, make sure you have at least these versions of the Airport software:
107795- AirPort Card: When You Can Join a WPA Network
Then read this article about set-up, including WPA Enterprise:
107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
"For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
"You may need the help of a network administrator to join an 802.1x network."

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

Setting up WPA-Enterprise

Similar Messages

Maybe you are looking for