Setting up WPC usage monitoring on the Portal

Hello Everyone,
I have been looking for a way to report on the number of portal users accessing different areas of the portal, such as KM documents, but in particular pages and objects that have been created in Web Page Composer (WPC). I know that I can monitor KM documents and have setup reporting for this using the following blog entry.
/people/michael.kronfeld/blog/2007/12/21/recording-access-to-documents-in-km - thank you Michael Kronfeld.
Unfortunately, the report generated from the above setup, outputs all logged entries using a GUID rather than the KM document name, example: u201Cpolicy.docu201D.
Iu2019m assuming that reporting on WPC activity, like the KM reporting may use the GUID method of identification, rather than the WPC object user readable name, example: u201CCareers Pageu201D.
Following the above description, does anyone know of a way to setup monitoring/logging for WPC pages/objects (article, paragraph, etc) on the portal using a method that identifies objects in a way where user readable names for WPC objects are used?
Thank you.

Kiran,
I have kind of put this one on the back burner as I have not had much luck thus far. I have however found a third party software called "Click Stream" by Sweetlets, and it looks promising.
http://www.sweetlets.com/click_stream.html
Hope this helps. I will update when and if I find out more.
Regards,
Chris

Similar Messages

How can I set up a second monitor using the DVI, a mini Displayport to dvi?

Hey guys,
In my office I'm trying to set up a mac with two displays, Samsung screensync sa450s, using a Startech MDP2DVIW mini displayport to dvi, and the DVI port found on the ATI Radeon HD 5770.
However, whichever monitor is plugged in through the mini displayport never shows video, and instead will just flicker sometimes, no matter which monitor I use, or which of the mini displayports i use. The system profiler recognizes both monitors, and has all of the specs on both monitors, but only the monitor connected directly to the DVI displays anything, even if it is the secondary monitor.
The StarTech does still work with the macpro that used to be in this spot, and the only salient distinction I can find is that the old computer has Mountain Lion, while the new one is still running Snow Leopard. Is this a case where we should just update the OS? or is there another fix?
I've also read online that many people have been not fully plugging in these mini displayports, so I'm worried that I'm doing that, but then I'd figure it wouldn't have worked when I plugged it into the old computer unless my predecessor had made some hardware adjustments.
Let me know.

A frequent solution to problems like the one you describe involves pushing in the Mini DisplayPort cable-end.
It should be inserted until essentially ALL of the metal end disappears inside the jack on the 5770 board.
Is this display wider than 1920 wide?
EDIT: The Startech MDP2DVIW adapter you cited is a passive adapter suitable for 1920 wide or less. You should be using ACTIVE adapters, about US$35. They cost a little more, but are much more trouble-free. The ACTIVE designation means they contain booster circuitry to raise the Voltage levels up to true DVI levels. The default converter produces good timing, but the signals are really low.

Application Monitor in the Portal - what authorization to use

We would like our super users to use the application monitor transaction, directly from the portal, to be able to keep track of purchase orders etc that are not transfered to backend. The CCMS and RZ20 transactions are mainly for the administrators and included in the administrator roles, like SAP_EC_BBP_ADMINISTRATOR.
What authorization object is needed to give the application monitoring possibility for the super users in the portal, without giving them "too much" authorizaton?
Does anyone know?

Hi,
The bbpwebmonitor transaction includes the following authorization objects :
B_BUPA_RLT
BBP_BUDGET
BBP_CTR_2
BBP_FUNCT
M_BBP_ADM
M_BBP_PC
PLOG
S_ADMI_FCD
S_BTCH_ADM
S_BTCH_JOB
S_DEVELOP
S_DOKU_AUT
S_OC_DOC
S_OC_ROLE
S_OC_SEND
S_RFC
S_SPO_DEV
S_TABU_DIS
S_TCODE
S_TRANSLAT
S_USER_GRP
S_XMI_PROD
For any transaction, just goto transaction SU24 et fill in with your transaction code.
Kind regards,
Yann

Setting the color of the portal background

I'm trying to set an overall background color for the portal. Can this be set through the CSSMill or will this require modifying the base code? This seems like a pretty simple change, but I haven't found the proper file to update.
Thanks,
Derek

Hi Derek,
Were you able to receive the instruction set I sent you yesterday? The zip file might have been blocked by a spam filter.
Yes, it is correct to use hex to format the colors in the style sheets.
The standard colors sent with the portal are as follows -
1 - Purple/Violet10 - Blue Gray2 - Golden Brown11 - Dark Teal 3 - Blue Purple12 - Dark Gray4 - Blue Green 13 - Olive5 - Medium Brown (Cinnamon)14 - Standard (Royal Blue) 6 - Strawberry15 - Pine Green7 - Purple (Grape)16 - Cranberry 8 - Gold17 - Orange/ Rust 9 - Dark Brown18 - Teal
If you follow these instructions, does your portal change to Gold -
Open Windows Explorer and navigate to PTConfig.xml("PT_HOME\ptportal\5.0\settings\config"), and open it in a text editor.
Find the StyleSheetNametag under the MyPagestag and change the valueattribute to "mainstyle8". <MyPages><MyPageRefreshRate value="1800"></MyPageRefreshRate>
<StyleSheetName value="mainstyle8"></StyleSheetName>
</MyPages>Restart your application server and load the portal.
Sudha

When is the usage monitor going to be fixed?

I have been getting this message for months now,
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
When is this going to be fixed? how many other people are getting this message?
Regards,
Frogman

I get the same message as you ukfrogman
Only been on BT Infinity for a couple of weeks. Had the usage monitor for the first few days, then it dissapeared and I now get the same message as you.
Cant say that I am too bothered, as I am not on an unlimited package

Vidiotron internet usage monitor

Hi,
I just downloaded videotron internet usage monitor from the apple site, and i have installed it in my widgets, its asking me to enter my user name in the widgets preferences how do i do this?
Also is the user name vlxxxxxx or do i have to change this.
Thanx....

Menu > Log > Packet Data, shows all sent and recieved data (so add them up for total usage), and you can reset the totals here anytime and set the log duration. If you are billed to say the 21st of a month then that is inclusive so reset last thing that night.
E71-1(241.04) RM-346 300.21.012

Best way to set up a second monitor with a Touchsmart

What's the best way to set up a second monitor for the Touchsmart IQ506? Is a USB to VGA cable the only way and how well does that work (I've read that they can be buggy)?
Are they any recommendations for products and setting it up?

Leopard wont be out befor the second half of this year, sofar i cannot tell you what options you are going to have with the new system. Seems like with time machine is going to be a perfect backup for your whole system.
10.4.x:
Software RAID you can do 0 -1:
To setup a RAID of your system you have to format the drive and setup the RAID type you want from the disk utility.
To have some security i suggest the "mirror" options but you are going to lose some perfomance, depending you want is your main job it mighn't be noticed.
RAID 5:
This would be the nicest option but you need to buy an additional RAID controller. This is mostly used on servers and not on client computers.

Setting Graph View Usage dynamically

Hello all,
I have a Graph Table with 2 graphs (Pie and Bar) and I'm trying to set their View Usage dynamically with the code below but it's not working. There is no error message, it just simply doesn't return anything. We need to set it dynamically because we have different levels and VO's to the same graph page.
Is there anything else that should be done?
OAGraphTableBean graphTable = (OAGraphTableBean)webBean;
if(graphTable != null) {
graphTable.setViewUsageName("OperationHdrGraphVO1");
Thanks and Regards,
Eduardo

Hi Sumit,
It worked creating the graph programmatically using the code below.
Thanks for your help.
Eduardo
Vector graphs = new Vector();
OAGraphTableBean graphTable = (OAGraphTableBean)webBean;
Dictionary graphBarDetails = new ArrayMap(10);
graphBarDetails.put("AGRFUNCTION", "none");
graphBarDetails.put("GRAPHTYPE", "vertical clustered bar");
graphBarDetails.put("GRAPHTITLE", "Cost Bar Graph");
graphBarDetails.put("YAXISLABEL", "Allocation Amount");
graphBarDetails.put("GRAPHSIZE", "medium");
graphBarDetails.put("CUSTGRAPHWIDTH", "");
graphBarDetails.put("CUSTGRAPHHEIGHT", "");
graphBarDetails.put("DISPLAYTOOLTIP", BooleanUtils.getBoolean(true));
graphBarDetails.put("XAXISLABEL", "");
graphBarDetails.put("DRILLDOWNURL", "");
graphBarDetails.put(DISPLAYED, BooleanUtils.getBoolean(true));
Vector graphCols = new Vector();
for(int j=0; j<2; j++) {
Dictionary graphData = new ArrayMap(5);
graphData.put("VIEWUSAGENAME", pViewUsage);
if(j ==0) {
graphData.put("VIEWATTRIBUTENAME", "AllocatedAmount");
graphData.put("GRAPHDATASTYLE", "data");
graphData.put("GRAPHDATAPROMPT", "Allocation Amount");
else {
graphData.put("VIEWATTRIBUTENAME", "AllocName");
graphData.put("GRAPHDATASTYLE", "groupLabels");
graphData.put("GRAPHDATAPROMPT","");
graphData.put("GRAPHSTOCKVALUE","none");
graphCols.addElement(graphData);
graphBarDetails.put("GRAPHDATACOLS", graphCols);
graphs.addElement(graphBarDetails);
graphTable.setGraphDetails(graphs);

Cannot access broadband usage monitor

Hi,
I've been having trouble accessing the usage monitor for the last two weeks, prior to that it was fine so I'm trying to work out what has changed. I've done a few searches on the boards but nothing has really helped. I saw some posts by Andy_N with various methods for accessing the usage monitor but all of these come up with the same message:
The usage monitor is currently undergoing maintenance. Please try again later.
At first I thought it was just exactly what it said, that the monitor was down for maintenance but now that I've not been able to access it for some days it seems obvious that the problem lies at my end or with my account. I also get another message on the 'Welcome to MyBT' page which possibly indicates an account issue:
Sorry, we are currently unable to present Manage your services information.
I've tried accessing the usage monitor from more than one browser/computer so I don't think it's a cookies issue or anything like that.
Does anyone have any suggestions or experienced anything similar or should I just give BT a call? Is there a specific phone number you can call to request your current broadband usage that I can use in the meantime?
Thanks
Paul

mijae wrote:
Hi,
I've been having trouble accessing the usage monitor for the last two weeks, prior to that it was fine so I'm trying to work out what has changed. I've done a few searches on the boards but nothing has really helped. I saw some posts by Andy_N with various methods for accessing the usage monitor but all of these come up with the same message:
The usage monitor is currently undergoing maintenance. Please try again later.
At first I thought it was just exactly what it said, that the monitor was down for maintenance but now that I've not been able to access it for some days it seems obvious that the problem lies at my end or with my account. I also get another message on the 'Welcome to MyBT' page which possibly indicates an account issue:
Sorry, we are currently unable to present Manage your services information.
I've tried accessing the usage monitor from more than one browser/computer so I don't think it's a cookies issue or anything like that.
Does anyone have any suggestions or experienced anything similar or should I just give BT a call? Is there a specific phone number you can call to request your current broadband usage that I can use in the meantime?
Thanks
Paul
Hi Paul. Welcome to the forums.
Have a look at my shortcuts (link below), options 14d-14j, and as mentioned the one in 14j one is the most recent monitor access.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

General Key Figure Monitor doesn't display data in the portal

Hi...
I have configured the general key figure monitor in SPRO. I executed the program KFM_VALUE_DET_SCHEDULE. When I execute the portal iview using the context id, the key figure data does't display. The context id is set to the key figure category.
Any ideas?

Hi
Thanks, that was just what I was looking for.
I have verified that it is the right task, but unfortunately I still have an issue.
If I add tasks like uwl.task.webflow.default.TS92000077 or uwl.task.webflow.TS92000077 in a view under Support Itemtypes, then these tasks are still not shown in my list.
If I add another task that exist in the default configuration file (under system registration) then it works fine.
Please look at the two screendumps under item Type. In the screendump that works the complete name is shown under Item Type and in the other case only a prefix call default is displayed.
http://webdata.dk/uwl/works.jpg
http://webdata.dk/uwl/fails.jpg
Am I missing some configuration in the backed or does anyone have any idea where this information is received from?
Thanks in advance
Cheers
John Stubbe

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)? I know that the monitor is able to accept this resolution but It can't seem to find it. Is it something to do with the new thunderbolt port? or the fact that I'm utilizing the VGA adaptor? I could go HDMI if that works better.

Use DVI or HDMI.
VGA runs out of steam after a while.

The BB usage monitor

Is it just my browser or is it a general thing.When I log in to check the usage monitor it is a full day behind,which rather defeats the object. For instance,this morning at 07:00am,I checked and it only gave me the usage till the end of the 20th March leaving out yesterday.I will be eventually upgrading to the next level of Broadband usage ie the 40Gig tariff,but in the meantime does anybody know of an onscreen monitor (from BT or anybody) that can be minimised to run in the toolbar? Cheers Kenny

The BT monitor shows usage up to the previous day, but it doesn't update until the morning. Don't know if there's a specific time for the update but mine showed up to yesterday just after 9am.
Third party monitors are available and this one is often recommended: http://www.thinkbroadband.com/tbbmeter.html. Their drawback is that they only apply to the computer they're installed on, which is of limited use if several devices use your connection. Whether any can be minimised to show real time use will need some more research.
You can click the white star next to this message if you think it was helpful.

The usage monitor is currently not available

BT.com message...
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
Thank you BT...may your utter incompetence reign supreme forever....
All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!

Hi Guys,
Thanks for raising this. I am sorry that you are having problems with the usage monitor. I would like to sort this out.
Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Monitors are the same, but Mac won't let me set them the same in Preference

Odd issue.
Two exactly the same Samsung Synchmaster monitors connected to the Mac Pro to make an extended display.
The monitor on the right never has the right resolution. When I set it's resolution to the same as the left monitor (1280x800), it looks awful.
Finally, I checked under Preferences>Displays, and under "Arrangement" I see that the computer has the left monitor set to the right little blue box dimensions (widescreen) but the blue box on the right is more square. How do I change the blue box on the right to match the dimensions of the one on the left?
Thanks
Thanks

Okay, scratch that. I set the one on the right to 1280x800, and now the blue box matches the size, but it looks terrible! I mean, really bad. Yet the same monitor with the same resolution settings on the left side looks fantastic.
Plus, the right side monitor won't let me choose 60 MHz, whereas that is the setting for the one on the left.
Any ideas what's going on here?
Message was edited by: Chris Farrington1

Setting up WPC usage monitoring on the Portal

Similar Messages

Maybe you are looking for