Setting up xbox live through a Macbook via ethernet cable

Hi there,
as i said in the title im trying to connect to xbox live with an ethernet cable going to my macbook (an aluminum one if that makes any difference) who's connection is wireless. The reason i want to do this is because my router is way too far away from my xbox to connect. Anybody know how to do this?
thanks!

System Preferences --> Sharing --> Internet Sharing.

Similar Messages

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

Connecting TC directly to my macbook via ethernet cable

Folks,
I've looked at a number of posts on this topic but I must be missing a step because it is not working. Simply want to do file transfer via ethernet.
so... I connect a ethernet cable from the TC to my Macbook - what do I do next?

dpm,
This works for me when I have to temporarily connect the TC to my Mac via ethernet.
*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.
Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
Let us know if this resolves your issue.
Cheers!

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

How to migrate PowerBook G4 Tiger to new MacBook Pro 15" Lion via ethernet cable? Migration Assistant to old to update, apparently.

How to migrate PowerBook G4 Tiger to new MacBook Pro 15" Lion via ethernet cable? Migration Assistant to old to update, apparently.

Ah, a Powerbook. I miss that. Anyways, I believe that the Powerbook G4 has an Firewire 400/800 port. Why don't you do that? It's fast, and you don't have to set up one of those funky reverse wire ethernet cables. I wouldn't use Migration Assistant, but that's just me. Too many issues. I'd start up your brand new MacBook Pro and during the setup assistant, it'll ask you to transfer data from an older Mac. Using firewire with a Target Disk Mode, it's pretty fast.
If you have already opened up your new Mac and are using it, then use Migration assistant, but also with the Firewire (preferably 800).

Can connect my emac to my macbook via ethernet

Hi All
Until I get my new Airport Extreme card through the post is there anyway that I can connect my emac to my macbook via ethernet and use the Airport on the macbook for internet connection on the eMac?
Many thanks
Garry

Click here and follow the instructions; the procedure is the same in 10.6.
(49968)

Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

I need to backup TC's drive. How do I do this to WD MyBook Live connected to TC via Ethernet?

I need to backup TC's drive. How do I do this to WD MyBook Live connected to TC via Ethernet?

P.S. Solved it exactly the other way around (compared to the original intent). 4 simple steps:
1. Made WD's MyBook Live my primary file server.
2. Made WD's MyBook Live my backup location for Time Machine (moving to it made me reconfigure TM on all home Macs = new full backups and no old data left - but I didn't really need old backups - they were sitting there just in case).
Added bonus - on MyBook Live it is easy to create shares (so that now my general file server is separate from my photo archive and software archive, etc.) - while on TC I had to partition the drive.
3. Moved all files from TC to MyBook Live.
4. Erased all data from TC - so that its drive is clean.
5. Instructed MyBook Live to automatically backup itself to TC.
Job done.

How to use Migration Assistant when trying to transfer from MacBook to a new iMac via Ethernet cable

I've been trying to transfer data from my MacBook to my new iMac via Ethernet cable and I get to the point of the transfer starting. Then on my iMac the Migration Assistant shuts down and takes me back to my desktop. Any ideas on why this keeps happening?

Start over, restoring the OS on the new machine, and follow the steps outlined in Pondini's Setup New Mac guide using the Setup Assistant.

My Seagate external 250GB hard drive ejects improperly without command. I am trying to use Time Machine to backup my macbook via usb cable... I keep getting the message that the disked ejected improperly... Any solutions...

My Seagate external 250GB hard drive ejects improperly without command. I am trying to use Time Machine to backup my macbook via usb cable... I keep getting the message that the disked ejected improperly... Any solutions...

You are not alone. Thousands have this problem, on various models of Macs. Short answer, it has something to do with the disk going to sleep (possibly?). You can't do anything about it and Apple won't address the problem. Maybe you should buy a time capsule. Just keep giving them money and use their proprietary equipment.
For a more complete answer, see this thread (all 65+ pages of it with NO SOLUTION IN SIGHT... except for some 3rd party solutions that sometimes work, sometimes don't): Disk Drive ejecting itself

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts ?

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?

Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.

Setting Up Time Capsule Via Ethernet Cable only no wireless involved.

I've just got TC to act just as a hard drive for my PowerBook(its got all the latest softwear)
It seams like all the setup details are in relation to a wireless net works. I don't want it to have anything to do with my wireless net work, that sounds like a accident waiting to happen.
All I want to do is copy my Itunes library on to it via a ethernet cable. I was assured I would be able to do this very easily at the Apple store, well after they stopped trying to sell me a new computer that is.
Any advise would be greatly appreciated, as it just sate there with a flashing amber light on it now.
there was me expecting/hoping it would be as easy as plugging in a new Ipod.
Cheers ..

I also have my time capsule connected via ethernet cable to my i-Mac the ethernet cable from my dsl modem goes into the WAN port. The gurus on the site may correct me but I don't think that you will ever get a green light unless your internet is plugged into the WAN port. Even with the flashing amber light the time capsule should function as a backup drive if everything else is setup right.

Connecting to Airport Express via Ethernet Cable

Dear Apple Support Community,
My setup at home is such that all my devices are in such close proximity to the Airport Express, and therefore I connect everything to the Airport Express via ethernet cables (NAS, Apple TV, PS 3).
The final step in my network setup would be to connect my Macbook to the Airport Express to connect to the internet using the Ethernet Cables, instead of using the wireless connection - because my Macbook is positioned right next to the Airport Express.
However, I am struggling to get the Macbook to connect to the Internet via the Ethernet Cable through the airport express. Is there a special way to set this up if this can be done. I know Wireless would be the answer, but the problem is, when I download movies etc, I write the files directly onto the NAS which happens a lot quicker than doing so via WiFi.
I hope the above question makes sense.
Thanks in advance for any feedback.
Regards
ST

Hello Brian Hunt1. Welcome to the Apple Discussions!
I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
If this isn't your model, then check out the following vendor offerings:
o QuickerTek
o hField Technologies' Wi-Fire

Setting up xbox live through a Macbook via ethernet cable

Similar Messages

Maybe you are looking for