Setting up xbox live with an airport extreme

I need help getting our xbox live running - NAT reads strict - Microsoft gave 3 gaming ports - I know I need to put them in the Port Mapping of the extreme but don't know what "service" to call it and which lines to fill in ie. public or private to make the xbox work. I was given UDP88, UDP3074, TCP3074 by Microsoft. HELP please......

Some light reading:
Xbox incompatible with 802.11n Airport Extreme
http://www.tuaw.com/2007/02/07/xbox-incompatible-with-airport-extreme/
http://discussions.apple.com/thread.jspa?messageID=4020660&#4020660
"Yeah, the XBOX 360 won't recognize any network with security, but it will for my old wireless router. This is a significant problem for me."
"The wired connection definitely works though. So purchase away if your 360 is close enough for a wired connection until a fix comes our way. "
"Yes, the new Airport Extreme 802.11n currently only works with the Xbox 360 with security disabled and MAC addressing OR via a wired connection."

Similar Messages

Help setting up Open DNS with new airport extreme

I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Setting up wireless network with 2x airport extreme ac

I've got a business customer with 2 new Airport Extreme 802.11 AC behind a comcast modem.
When the first extreme is set up, all is well.
When the 2nd Extreme is introduced, Airport Utility asks to automatically wirelessly extend the network, which I allow it to do.
But sometime during that setup, the 2nd extreme becomes unresponsive, and the connection to the internet becomes broken.
The only thing that restores it is to reboot the first Extreme. No matter how many times Iv'e done this, it results in the same problem. I've replaced Extreme #2 with a new one, and I get the same problem.
There are 20 some odd devices on the network; with one Extreme, it works great, and the Extreme AC's replaced 2 older version of Extreme's that were doing this just perfectly.
What is causing this problem, other than me doing something stupid, and how do I extend the network? I'd rather extend it with the wire it's connected to than wirelessly.

Power off AirPort Extreme 2 for now and test the Ethernet cable that is connected from one of the LAN <-> ports on Extreme 1 by temporarily connecting the cable to the Ethernet port on a laptop or desktop. Turn off the wireless off on the computer and see if you can get a good Internet connection that way.
If you can, then you know that the Ethernet port on the AirPort and the cable are both working correctly.
If you can't, then you need to do some troubleshooting to identify the real problem before you can attempt to configure AirPort Extreme 2.
Post back when you have verified that you have a working connection between AirPort Extreme 1 and the device that you are using to test.

Need help setting up a network with new Airport Extreme

Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Airport Express as wifi card for Xbox Live, then connect to Extreme network

My son just got xbox Live and we're trying to use Airport Express as wifi card for xbox (connected to xbox via ethernet). We use Airport Extreme as router for the house.
We're having trouble setting up Xbox Live, keep getting stuck at getting the xbox to communicate/access the web. Error reads "can't obtain IP address from router... make sure DHCP is enabled and has a large enough address range for all devices on network.. also make sure MAC filtering allows your console's MAC address or is disabled... "
We dont' know what else to do. I'm at wit's end before giving Gates $100... Anyone know how to get connected?
Thank you!

You can also perform a simple test to verify if you have an internet connection at the ethernet port on the AirPort Express.
Move a laptop near the Express, turn off the wireless on the laptop, and connect to the Express using an ethernet cable. See if you can open your browser and get a good solid internet connection.
If you can, the Express is setup correctly and you know that you have an internet connection reaching all the way to the Xbox.
If you can't then there is a configuration error somewhere and it will need to be identified and corrected.

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network"

Setting up TC on N (5 GHz), with older AirPort Extreme and Express on B/G

Hi there,
I've done a search through the forums (and the net) to see if I can find a solution to my query, but the answer currently escapes me so I thought I'd ask outright....
I have recently purchased a Time Capsule. Previously my wireless network relied on an AirPort Extreme Base Station (one of the older white models that looked like a UFO) over 802.11 b/g which was extended by an AirPort Express (again, non-N).
What I would very much like to do is create a setup that has the Time Capsule running 802.11 N only over 5 GHz, with the AirPort Extreme connected to it over Ethernet and still running a B/G network out with the Express.
There is a diagram here, which shows exactly what I want, but their instructions are far from complete or up-to-date with the current AirPort Utility software: http://www.appleinsider.com/articles/08/03/31/exploringtime_capsule_wifi_802_11n_and_the_5ghzband.html
However, I can't for the life of me work out how to do this. If someone could help me out I would very much appreciate it.

For the TC, I suggest that you change the Radio Mode to: 802.11n only (5 GHz) - 802.11n only (2.4 GHz).
For the AEBS & AX, I am assuming that you still want them as an extended wireless network ... correct? If so, all that would need to change is the following for the AEBS:
o Connect the AEBS directly to one of the TC's available LAN (opposing arrows) ports by Ethernet. Connect this Ethernet cable to the WAN (circle-of-dots) port on the AEBS.
o Reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))
o You may want to rename the AEBS/AX wireless network with a new Network Name (or SSID). This is totally optional, but may prove helpful as a reminder that you only want non-"n" clients to connect to it. For example, and with absolutely no imagination on my part, you could name your TC's wireless network: My Really Fast Network, and the AEBS/AX's: My Not So Fast Network.
o Finally, you will want to be sure the the AEBS/AX wireless network is at least 3-5 channels away from the 2.4 GHz network provided by the TC. This will prevent any Wi-Fi interference between them.
The WDS settings created earlier when you configured the AEBS & AX for an extended network should remain the same.

How do I use existing TM backup with upgraded Airport Extreme?

I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?

djlstewart wrote:
I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information
No, it won't show that until a backup is done. See #B3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?
It should just do an incremental backup.
|
But, you need to know, backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).

Setting up a security system via Airport Extreme...

So I'm setting up an in-home security system called ingrid and everything is cool but the ingrid system does not detect the internet. I have everything set up as per the instructions for airport and ingrid... I'm a assuming it must be some kind of setting that just isn't allowing the phone that the system works off of to access the internet... I put in the phone's MAC address and gave it everyday all day timed access.. Still nothing... please help.

Most Guest Network problems are a result of not using the correct type of modem with the AirPort Extreme.
Apple is expecting you to use a simple modem.....not a modem/router or gateway type of device.....with the AirPort Extreme.
So, let's first confirm on what type of device that you have to make sure that it will be compatible with the Guest Network feature.
If you are not sure of your modem type, post back with the make and model number of the device that you call your "modem"......so we can check compatibility with that device.

Problems setting up Verizon DSL (DHCP) and AirPort Extreme

I have Verizon DSL with DHCP and old router (Linksys WRT54G). I've bought iMac and new router (AirPort Extreme) to connect to iMac wirelessly. I have a Windows computer connected to the Linksys WRT54G. Now here is the story. I can connect verizon DSL modem (it's in bridge mode) to PC directly and connect to the Internet. When I plug AirPort between the DSL modem and PC, auto-configuration doesn't work, AirPort utility says there is problem with internet connection. Router simply can't obtain IP address from verizon's DHCP server. I've tried to copy DNS server addressed from the IP configuration in Windows, the AirPort light went green and Windows indicated connection as successful, however I still cound't browse the Internet because gateway is not set. Any ideas how to make AirPort connect to the internet using DHCP instead of manual settings? I can try to do it from the mac if needed, I don't think it would make any difference though.

Welcome to the discussions!
Sorry, I can't quite track exactly what you are trying to do.
What would the network that you are trying to set up look like?
Modem>AirPort Extreme>Computers? Are you saying that you won't be using the Linksys in the new setup?
Sounds like you need to set the Airport Extreme up to supply PPPoE service (which the Linksys is doing now-if the modem is in bridge mode), but I will wait for your response before offering specific info.
If you've been fiddling with settings, we may need to do a hard-reset on the AX to start over. You should not be fiddling with DNS, etc. Almost always, these settings are done automatically when you have the device set up correctly.

Problems with Bonjour, Airport Extreme and OS 10.4.3

I have a networked, HP Photosmart 8450 printer. The printer was connected to both an iMac 20" and PowerBook G4 15" running OS 10.4.3. Yesterday, I lost the ability to print from the PowerBook. I have identified it as a problem with my Airport Extreme connection.
The iMac can see the printer just fine, and it shows up using Bonjour when I browse printers in the Printer Setup Utility. The PowerBook, however, cannot see the printer - that is, it does not show up in the browser, but only when I use the Airport connection. However, when I connect the printer to the PowerBook via USB, or when I plug a network cable in to the PowerBook, it sees the printer immediately using Bonjour.
It appears, then, the problem is with my Airport Extreme card. Has this issue been identified by anyone else/Apple? Perusing the discussion boards, it seems others have had this problem.
PowerBook G4/iMac Mac OS X (10.4.3)

Thanks for the response, however, my question remains: I'm wondering if anyone else with an Airport Extreme ("b" version) and OS 10.4.9 installed has a problem using Admin Utility 4.1.1 and/or Airport Setup Assistant 4.1.1? Specifically, the problem is, after resetting the Airport Extreme, I was able to set it up using the Setup Assistant (establish the network, set the password), but thereafter, it does not show up in the Admin Utility at all (but the Extreme's lights flash as it is being accessed) and in Setup Assistant, it shows up, but there are "errors" when trying to change settings. It is very odd.
When I was running 10.3.9, I had had no problems setting up/administering my Airport Extreme. Suspecting the Extreme itself, I even had an Apple Genius inspect it at the Apple store, but it was pronounced in working order. I might try to check the Airport card inside the G4 (by trying it in a friend's G4). If this communication problem is not shared by anyone else (ii.e., a software issue), it could be my Airport card.

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

Using TM with laptops, Airport Extreme w/ external HDDs

I haven't tried this yet, but after reading about the laptop issues (unplugging, plugging into external HDDs to get caught up, etc.), I was wondering if TM would work by setting up external HDDs on the Airport Extreme as the backup destination for laptops? That way, it could sync wirelessly every hour, and you wouldn't have to worry about remembering to plug into the HDD at the end of the day, etc. Anyone tried this yet?
I've had problems in the past trying to get my external HDDs to work with Airport, so that's my first problem. Not sure how the speed will be either. I have 1 MacBook Pro and 2 MacBooks in the house, so this is somewhat of a big deal for my family. Backups right now (Tiger) are kinda left up to the user to remember to do (using .Mac backup program).

Officially at this point Time Machine can't use AirDisk (HD on an AirPort Extreme), though some have suggested workarounds. Since this was a feature in the late betas, according to many other threads discussing Time Machine via AirDisk, it's not too unlikely that this will become a feature once Apple fixes whatever caused it to be dropped from Leopard.
Doug

Is the Linksys WMP54G PCI adapter compatible with the Airport Extreme?

I have set up my network using the Airport Extreme and am able to connect my iMac, my Macbook Pro, and two Windows laptops without difficulty. However, the two Windows desktops that I have are using the Linksys PCI wireless adapters (WMP54G) and they both do not even see my network. They are able to see the neighbors' networks just fine, though.
I called Linksys and they assure me that the cards are compatible with the Airport Extreme. Linksys advised me to adjust my settings or call Apple for support. I have tried configuring the Airport, but I don't really know what settings to change. Has anyone else successfully connected using this adapter? If so, could you help me connect? Thank you very much!

Ok, thanks! Try the following setting on the WMP54G PCI adapter:
o Look at page 12 of the adapter's User Guide for reference ...
o For Security, select WPA Personal
o For Encryption, select AES
If this doesn't work, try reconfiguring the AEBSn for WPA Personal (not WPA2 Personal), and then make the following change on the adapter:
o For Encryption, select TKIP

Setting up xbox live with an airport extreme

Similar Messages

Maybe you are looking for