Setting value in the detail level field using hdr level lov

i try to set value in the detail table using hdr LOV , at that time some fields value are set and some are not set. i don't understand why this happens, please give me the solution

huh?
You provide nowhere near enough information for us to even understand what you want to do, let alone to answer.
John

Similar Messages

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

How to set values to the structure containing a node with cardinality 0..n

Hello.
I 'm trying to set values for the node with cardinality 0..n. The node type is "Fields".
<xsd:complexType name="Field">
   <xsd:sequence>
      <xsd:element name="fieldCode" type="xsd:string"></xsd:element>
      <xsd:element name="displayValue" type="xsd:string" minOccurs="0"></xsd:element>
   </xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Fields">
   <xsd:sequence>
      <xsd:element name="field" type="tns:Field" minOccurs="0" maxOccurs="unbounded"></xsd:element>
   </xsd:sequence>
</xsd:complexType>
I need to set several values for the element "fieldCode" but it has cardinality 0..1 and BPM does not allow it but I did not find any option about how to set values for the structure of type "Fields". Could you help me?
Best regards,
Timur Semenchuk

Hi Marcus,
If there is no way you could change the cardinality of the node, and thus it can contain 0..n items, I think you should create-and-add a new element programmatically.
Since the collection can contain zero elements, I would add a 'new' button, which upon clicking adds one new element via:
IYourNodeElement yourNodeElem = wdContext.nodeYourNode().createYourNodeElement();
wdContext.nodeYourNode().addElement(yourNodeElem);
Hope this explains a bit!
Best,
Robin van het Hof

BPS-dynamic columns-single value in the planning level.

Hello, we would like to use a compound characteristic in dynamic colums.
Based on test and documentation we already know that we can use compound characteristics in dynamic columns only if the higher-level characteristic is restricted to a single value in the planning level.
If we use a variable restricted to a singel value per user it does not work. Does it mean in general that a varibel cannot be used in that case and that we have to create about 30 planning packages with a fixed value for the higher level charactersictic?
Thanks for help.

This is solved now with support package 12

How to transport a value in the same level rule

I want to transport a value in the same level rule,but failed. Would you please give me some idea to finish it? Thank you!

the sample about rule zz01 as the fllowing:
zz01
       4001 deduction for absent from work
        SETIN R=3
         SETIN A=01    'NUM=3
          ADDWTI4Z03   '4Z03=3
    4002 sick leave
              SETIN R=3
              SETIN A=01
              ADDWTI4Z09    'set 4Z09=3
I want to transport the value of NUM in wagetype 4001 to the variable in wagetype 4002.
Thank you!

Which are the setting values for the Virtual CTI Driver? (Siebel Communica)

hi everybody,
the application I'm using is Siebel Communications 8.1.
I am learning about integration processes with the Siebel Communications Server Administration Guide. One of the points or topics there is the use of the Virtual CTI to integrate your Siebel Business Applications with Oracle Contact Center Anywhere (as in the bookshelf described).
I've read, with this driver agents can access communications functionality using the communications toolbar.
The Virtual CTI is a driver provided by Oracle. You can't see it listed on the Administration -> Communications ----> Communications Drivers and Profiles. So I guess it is important to add this driver to the list.
I have questions about that:
1. Should I add this driver to the list? or when can I do that?
2. Which are the setting values for the mentioned driver?
- Communications Channel?
- Inbound Yes
- Outbound Yes
- Interactive
- Channel string
- Library name
Could anybody help me? I would appreciate that.
Regards

Thanks for the reply KT.
I am not sure how to set a new custom style, but will look it up. If you have a url that points to the topic I would appreciate it.
Thanks,
Rhek

What's the detailed GPS protol used to generated GPS bin file?

I encountered a problem recently.
) When we used actual GPS signals instead of simulated signals generated from the PXI-5671, the receiver functioned normally.
2) When we streamed bin file to generate signals repeatedly using the PXI-5671, the receiver could receive correctly for the first time, while at the rest of it the receiver couldn't receive the signals nor display how many satellites there were and what the signal strengths were.
The R&D engineers of the receiver in German want to know the detailed GPS protocol used to generated GPS bin file. They want to find the differences between the receiver and NI GPS generator.
Could you give me the detailed GPS protocol? thanks!

Hello,
In the ni GPS bin file ther header is is stored as following.
Of the first 8 bytes the first two bytes are version of GPS toolkit it was use to save the data, the next 4 bytes will be IQ rate, the next 4 bytes will be peak power in dBm and then rest 488 bytes will be just buffer data or 0 padding. Here is the screenshot of that. The actual data is stored as I16 format as I and Q data block. Hence the actual offset from the starting of the file is 512 bytes.
Hope this helps. For reference you can look at the niGPS Streaming From File.vi located in C:\Program Files\National Instruments\LabVIEW 2009\examples\RF Toolkits\GPS\Programming
Thanks
NI-khil
Message Edited by NIyer on 05-14-2010 12:40 PM

Trouble in BEx Analyzer when try to set values to the variables in ZXRSRU01

Hi Experts!
I have the trouble in BEx Analyzer when try to set values to the variables in ZXRSRU01 on i_step = 1.
When variable's screen apeares the values is not those what was set in ZXRSRU01. When I try to trace
this in RSRT I have no this problem, all the values are same as was set in ZXRSRU01.
Thanks in advance.
Best regards,
Andrey Bychkov

Hi
Check this
Documentation about variable types & their processing in i_step = 1, 2 etc.
It may help you....
Cheers

I want to remove or hide the Details Panel. when using OpenDoc.

Hello I'm Yong ho Park.
I recently had hard time because of Details Panel.
I want to remove or hide the Details Panel. when using OpenDoc(Dashboard file).
My system's version is BI 4.1 SP02.
Is your problem solved??
If your problem isn't solved, I want to be offered related formation.
I need your help. !!

Hi,
you cant hide the Details Panel. This behaviour is By Design.
http://service.sap.com/sap/support/notes/2021076
Regards
-Seb.

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

It depends on what you mean by "verifying the details". sberman gave you the best place to look to research the technical specifications of the device you are thinking of purchasing. If, however, you're asking how to check if the device is Activation Locked, then you can check the status here: https://www.icloud.com/activationlock/

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

How do I set (or auto populate) the value of a modal dialog field using javascript?

I have a Modal Dialog on my SharePoint 2010 page the following fields: Your Name, Subject, Priority, Message.
It links to a list I have on the site. The second field, Subject, I want to auto populate it when the window opens, so the user can leave it as is or modify the subject. I want to set the field value using javascript.
I've tried setting the field with this code:
document.getElementById('Subject').value = "Test";
and also, this:
setFieldValue('Subject','My custom value');
Neither work.
How do I set the value of the subject field when the user first opens the dialog using javascript?
Please help.

I am sure, you are looking at default field value of a list column(single line) in a modal window, if so please try below code
<script src="https://code.jquery.com/jquery-2.1.0.min.js" type="text/javascript" abp="397"></script><script type="text/javascript" abp="398">
$(document).ready(function(){
$('input[name*="Subject"]').val("Test");
</script>
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Use AD data to set values in the registry

Hi all,
Hope some one can help me.
I am working on a GPO to update values in the registry. Some of these values should be set, with fields from the Active Directory, like Office, Department, etc.
Is this possible using the GPO preferences or can this only be done through a script.
Thanks.

I'm trying to think of a way you could do this just using preferences but at the minute im struggling, I think you would need to use a script first to grab the details of the user and then create the reg keys on the fly, then import them in to the computer.
Depends on where you want the reg keys to go you may struggle a little here though if your users are not admins on their PC's. As to write to HKLM you need admin rights. But to get the user information you would need to use a user login script, rather than
a computer startup script.
I'll have a think and see if there is a better approach. Just for my understanding I guess you are looking at writing values to the local computer registry for the currently logged on user?
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Using JavaScript to set value of Spry validated text field

Why can't the value of a text field be set using JavaScript
when it's validated using the Spry validation widget.
Example (this works):
<select name="birthdate_month" id="birthdate_month"
onChange="document.getElementById('birthdate').value = 'test';">
<option>1</option>
<option>2</option>
</select>
<input type="text" name="birthdate" id="birthdate"
value="">
Example (this doesnt work):
<select name="birthdate_month" id="birthdate_month"
onChange="document.getElementById('birthdate').value = 'test';">
<option>1</option>
<option>2</option>
</select>
<span id="birthdate">
<input type="text" name="birthdate" id="birthdate"
value="">
<span class="textfieldRequiredMsg">please enter your
birthday</span>
</span>
<script type="text/javascript">

</script>
Is there a way to change the value of a Spry validated text
field using JavaScript?
Thanks.

Why can't the value of a text field be set using JavaScript
when it's validated using the Spry validation widget.
Example (this works):
<select name="birthdate_month" id="birthdate_month"
onChange="document.getElementById('birthdate').value = 'test';">
<option>1</option>
<option>2</option>
</select>
<input type="text" name="birthdate" id="birthdate"
value="">
Example (this doesnt work):
<select name="birthdate_month" id="birthdate_month"
onChange="document.getElementById('birthdate').value = 'test';">
<option>1</option>
<option>2</option>
</select>
<span id="birthdate">
<input type="text" name="birthdate" id="birthdate"
value="">
<span class="textfieldRequiredMsg">please enter your
birthday</span>
</span>
<script type="text/javascript">

</script>
Is there a way to change the value of a Spry validated text
field using JavaScript?
Thanks.

Setting value in the detail level field using hdr level lov

Similar Messages

Maybe you are looking for