Setting Web service runtime

Hi
How can i change the Web Service runtime in the IDE studio from "Apache Axis" to "Sap NetWeaver"?
Regards
Raja

Hi Raja,
Are you really using the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/da699d27-0b01-0010-99b0-f11458f31ef2">java EE 5 version</a> from SDN? Because it works as described in there.
-Vladimir

Similar Messages

Error in testing XML query result set web service

Hi
I was trying to test a <b>XML query result set web service</b> in BW system with tcode wsadmin but getting error like
<b>Cannot download WSDL from http://ibmbtsb02.megacenter.de.ibm.com:8070/sap/bw/xml/soap/queyview?sap-client=001&wsdl=1.1&mode=sap_wsdl: F:\usr\sap\W70\DVEBMGS70\j2ee\cluster\server0\apps\sap.com\com.sap.engine.services.webservices.tool\servlet_jsp\wsnavigator\root\WEB-INF\temp\ws1139464945296\wsdls\wsdlroot.wsdl (The system cannot find the path specified)</b>
I had tried it first time few days ago and was able to test it successfully with the same configuration settings.
Could any one of you please provide any suggestion on this?
Thanks in advance
Sudip

hi
check this links it may help u.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/frameset.htm
Regards,
Manoseelan

Errors configuring the Web Service Runtime

Hi All, I'm trying to configure the Web Service Runtime using SRT_ADMIN on SAP Netweaver Trial 7.02.
I have almost everything working, except three things. I ran SRT_ADMIN_CHECK and i got the following messages:
Checking cross-system settings
bgRFC destination is operational
bgRFC supervisor destination is registered
WSRM event handler is active
Task watcher is active
Data collector for monitoring is not activated
ICF node is active. /sap/bc/srt/
ICF node is active. /sap/bc/srt/wsil
ICF node is active. /sap/bc/srt/wsdl
ICF node is active. /sap/bc/srt/esf_in
ICF node is active. /sap/bc/srt/xip
ICF node is active. /sap/bc/srt/rfc
ICF node does not exist. /sap/bc/srt/pm
ICF node is active. /sap/bc/srt/xip/sap
ICF node does not exist. /sap/bc/srt/scs
Some of the SRT ICF nodes are inactive or do not exist
Ending check of cross-system settings
I checked in SICF and these two services does not exist in the tree. These two unexsting services are a limitation of the trial version?. If not, then how can I create them, if so, what are the parameters? Can I download a note or a manual regarding these two services?. Also how can I activate the data collector?

Hi Mauro,
Please check SAP Note 1501709 for the missing nodes issue.
Regarding the Data Collector, I've never seen this activated anywhere before - without any repercussions. You could maybe try doing some research on a background job called SAP_SRT_COLLECTOR_FOR_MONITORING though.
Regards, Trevor

Web service runtime Config - SRT_ADMIN_CHECK not correct

Hello to all,
I have config the web service runtime as it is shown in note 1043195 or in help.sap.com:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/2bd53ecb69060be10000000a155369/frameset.htm
Now I check the configuration with the Report SRT_ADMIN_CHECK.
The table shows following entries:
Prüfung der systemübergreifenden Einstellungen
Die bgRFC Destination ist nicht betriebsbereit!
Die bgRFC Supervisor Destination ist registriert
WSRM Event Handler ist aktiv
Task Überwacher ist aktiv
Datenkollektor für Monitoring ist nicht aktiviert!
ICF Knoten ist aktiv. /sap/bc/srt/
ICF Knoten ist aktiv. /sap/bc/srt/wsil
ICF Knoten ist aktiv. /sap/bc/srt/wsdl
ICF Knoten ist aktiv. /sap/bc/srt/esf_in
ICF Knoten ist aktiv. /sap/bc/srt/xip
ICF Knoten ist aktiv. /sap/bc/srt/rfc
ICF Knoten existiert nicht. /sap/bc/srt/pm
SRT ICF Knoten sind z.T. nicht aktiv oder nicht vo
Ende der Prüfung der systemübergreifenden Einstellungen
Prüfungen der mandantenabhängigen Einstellungen
Service Destination in Mandant 001 ist nicht konfiguriert
Service Destination in Mandant 066 ist nicht konfiguriert
Ende der Prüfungen der mandantenabhängigen Einstellungen
Mandantenabhängige Verbindungsprüfungen (Destinationen)
Verbindungstest in Mandant 000 gelungen
Service Destination in Mandant 001 nicht registriert
Service Destination in Mandant 066 nicht registriert
Verbindungstest in Mandant 100 gelungen
Ende der mandantenabhängigen Verbindungsprüfungen(Destinationen)
Now my questions:
1. How could I resolved the problem with the bgRFC destination is not operational?
2. How could I activate the Data collector for monitoring?
3. Why do not exists the ICF node /sap/bc/srt/pm and how to resolve this error?
Thanks and regards
Martin

Hi Martin,
From what I can understand ,It seems like the node /sap/bc is not active in sicf.
Do the following:
1) Logon to the ABAP Server
2) Goto transaction "sicf"
3) It takes you to the maintain services screen, click "execute" button
4) On the next screen, under "default host", you can see sap-->bc
5) Right click node "bc" and select "activate". Activate the entire subtree.
This should hopefully solve your problem.
Regards,
Sangeetha

Set Web Service Call Timeout

Hi,
in earlier JDeveloper while creating a web service client we used to easily set the call timeout, but now we're using JDev 10.1.3, generating a proxy create a lot of new classes, moreover, the methods calls is not handled the same way it was, but we still need to set the call timeout.
The automaticaly generated code is something like this:
public MyServiceClient() throws Exception {
ServiceFactory factory = ServiceFactory.newInstance();
port = ((servicesource.proxy.MyServiceService)factory.loadService(servicesource.proxy.MyService_Service.class)).getMyService();
this.setEndpoint("http://server/MyService");
nothing extends neither implements the OracleSOAPHTTPConnection (which has the setTimeout method we used to use)
Any ideas?
Thanks.

ahhh,
is there any available explanation why it is not available anymore? specs?
Calls are hanging now, what would be the defaul timeout value?
it can't be changed programmatically? can't we modify it by some global variable/property/xmlFile ?
thank you.

Set web service url

Hi!
I generated web service client using clientgen tool. This client is searching for webservice listening on url specified in wsdl. Is there any chance to change the target endpoint address like setting some property so there would be no need to generate client (with wsdl with new address) again?
This is how i prepare call parameters:
SfOXPReports_Impl service= new fOXPReports_Impl();
SfOXPReportsSoap client= service.getSfOXPReportsSoap();
// web service call
SCReportMerge mergeResult= SCReportMergeDocument.Factory.parse(client.merge(mergeParam.xmlText())).getSCReportMerge();
Any suggestion?
Edited by DJmanta at 04/11/2008 3:52 AM
Edited by DJmanta at 04/11/2008 3:54 AM
Edited by DJmanta at 04/11/2008 3:54 AM

You can set the property:
stub._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, your_url);

Set Web Service in SAP

There is project to create Web Service in SAP to allow our client to access to customer info through web service. I am trying to create a proto type of solution to prove that it will work.
I know how to create Web service for FM. I need to know how to configure / set up the other required SAP components like UDDI and/or proxy, etc.
I am trying to test SAP Web service in my local machine, I have installed application server tomcat - jakarta-tomcat-4.0.6 in my machine. What else do I need to be able to get access to new SAP web service via tomcat?
Any help is greatly appreciated.
Reza

Thanks for the info.
I still don't know how to release and use the SAP Web service that I have created. That would be realy helpful if you could give me tasks/step that I need to take to complete the process.
Thanks in advance.

Web Service Runtime error

Hello everyone
In our newly built AP0 ( dev, qa & prod ) systems there are many errors of web service and now the systems are being used by Users.
Error --> 000 SAPSYS WS 4 Error in techincal configuration Error during the retrieval of the logon data store,
checked the below link .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/4420e292b75e3fe10000000a11466f/frameset.htm
Followed the help and ran the report SRT_ADMIN_CHECK
I see that the RFC is not defined and BG job (SAP_SOAP_RUNTIME_MANAGEMENT) is configured.
The above BG job is not in the standard job list.
Can someone help me to know more about the need of the web service and Can we stop this error by following sapnote 1163844.
Thanks in advance
Medha
Edited by: MedhaD on Sep 2, 2010 8:52 PM

Can someone help me plsss !!!!

Web Service Runtime

Hi all,
I am deploying a web service in a new system, but after I have created a web service correctly:
1) I cannot see in wsadmin (maybe because it's obsolete?)
2) I cannot test the service by the web service navigator
I think some service have to be started, so I started
1 bc
2 soap
3 srt
4 rfc
5 sap (namespace where my service are created)
but I think something is missing
can anybody please help me?

hi , WSADMIN is obsolete but still it works
u can test ur service from there or else u can try form SOAMANAGER
tyr once again
cheers
afzal
Edited by: mohammad afzal on May 6, 2009 10:20 AM

Reset web service runtime statistics in WLS

can someone pls guide me how to do that with WLST for a particular webservice?
It must be possible since I can do it from the Service Bus console as well.
any infos are appreciated,
thanks,
Barossa

Hi Martin,
From what I can understand ,It seems like the node /sap/bc is not active in sicf.
Do the following:
1) Logon to the ABAP Server
2) Goto transaction "sicf"
3) It takes you to the maintain services screen, click "execute" button
4) On the next screen, under "default host", you can see sap-->bc
5) Right click node "bc" and select "activate". Activate the entire subtree.
This should hopefully solve your problem.
Regards,
Sangeetha

RPC web service session beans and local interfaces

I am wondering if it is possible to use EJB 2.0's local
interface (vs remote interface) with 6.1's RPC web service
session beans. Since WLS generates the SOAP servlet that
invokes the RPC session bean and I do not find
a way to some how tell SOAP servlet to use local interface to
get the session bean's local home interface, I am not sure
this can be done.
Any comments would be appreciated.
Thanks.
Peter

Ta. Thanks for the info.
Any idea when Local I/F support is due?
-Nick
"Neal Yin" <[email protected]> wrote:
>
"Nick Minutello" <[email protected]>
wrote
in message news:3d4413a4$[email protected]..
I was just about to post the very same question - but for WLS 7.0.0.1.
There are essentially two questions:
1) (from a functional perspective)
Can I expose Local Interfaces as SOAP using the auto-generation(servicegen ant
tasks)?Local Interfaces support is coming.
2) (from a performance perspective)
Does the generated SOAP implementation go via the (expensive) RemoteInterface
(ie marshalling) - or is the RMI marshalling optimised out (by setting<enable-call-by-reference>true</>)?
You can set this option by yourself on your EJB. Web service runtime
doesn't
do any magic in this area.
Regards,
Nick
"Peter" <[email protected]> wrote:
I am wondering if it is possible to use EJB 2.0's local
interface (vs remote interface) with 6.1's RPC web service
session beans. Since WLS generates the SOAP servlet that
invokes the RPC session bean and I do not find
a way to some how tell SOAP servlet to use local interface to
get the session bean's local home interface, I am not sure
this can be done.
Any comments would be appreciated.
Thanks.
Peter

Web Service - Consumer Proxy - how to include wsa:To

Hello to all,
we have following scenario:
ECC6.0 to ESB to WAS
communication with Web Services
ECC 6.0 Web Service Runtime configuration is correct.
Now we need in the ESB the tag wsa:To
How can we add it to the message in the ECC 6.0?
regards
Martin

Thanks Gaurav.
The link talks about setting up the Trust with MDM server.
The code sample provided there has the following step where user name is being set and passed to MDM:
Use command to authenticate user session on trusted connection
       TrustedUserSessionCommand tuscTrustedUser =
       new TrustedUserSessionCommand(mySimpleConnection);
       // Set the user name to use
       tuscTrustedUser.setUserName(UsernameAsString);
       tuscTrustedUser.setSession(session);
       tuscTrustedUser.execute();
       session = tuscTrustedUser.getSession();
I want to understand how to do that for MDM Web Services.
I didn't see any method accepting this user name while calling the web service method / creating client object.
So that link is still missing.
Appreciate if anyone can help me with that.
This is for MDM 7.1
Thanks,
Parvinder

What Web service client does Omniportlet use?

Does the omniportlet uses direct SOAP calls for Web service or use AXIS calls??
Thanks
JO

Hello,
As you may know OracleAS / JDeveloper has its own Web Service runtime and set of Tools. Omniportlet uses the Oracle AS Web Service Client API and WSDL tools to invoke dynamically SOAP based Web Services.
I am curious to know why are you asking this question? Do you have specific requirements?
Regards
Tugdual Grall

SOAP Web Service Authentication configuration

Hello,
I've got a little problem with Web Service authentication configuration.
I'm working on the SAP NetWeaver CE EHP1 7.11. I also have a XMII application deployed on the server and there are some SOAP Web Services(over XMII Transactions) that require basic authentication.
I use all Web Services in the EJB layer. So, I've generated proxy using SAP NetWeaver as a Web Service Runtime for generation. And Iuse an injection mechanism to get a service implementation:
@WebServiceRef(name="GetBatchListService")
private XacuteWS batchListWS;
In this case I could use Single Service Administration application in the NetWeaver Administrator@SOA Management@Application and Scenario Communication to configure basic authentication for EVERY Web Service. And this configuration disappears after every redeploy.
The question is how and where could I configure authentication for all web services?
I've read a lot of documentation, but, unfortunately, I haven't found needed one. I could see 2 direction of searching now, it might help:
1) Destination: Configure HTTP Destination or Web Service Template Destination and use it in all Web Services proxies somehow.
2) Find Configuration way: Create a configuration group or anything else to configure all services from one screen.
Best Regards,
Dmitry

Dimtris,
If your WSDL url is pointing to the URL of the Adapter Engine as shownin the Hot to Use the SOAP adapter there is no option. You cannot add it to the SOAP Url.
But, if you change the SOAP Url to the Url shown in this blog by Stefan Grube then you can add the user id and pasword to the url by adding sap- user=userid and sap-password = password.
The optin shown ion the blog by Grube can be used as long as you do not have to use SOAP attachments and in this case you would not need both sender SOAP adapter and a sender agreement.
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh
Regards
Bhavesh

Error while creating Web service

i have just started working on web service and have installed WAS .
i am trying to create a simple web service.
After creating an EJB when i try to click on Context Web Services-->>Create Web Service i get an error "IWAB0234E An internal error occurred.".
Thanks In advance.
pankaj

Hi Pankaj,
This is a known WTP problem. See for example http://www.eclipse.org/webtools/jst/components/ws/M5/news/jst-ws-m5news.html and especially <a href="https://bugs.eclipse.org/bugs/show_bug.cgi?id=99728">Bug 99728</a>.
Hopefully, if you select the configuration as "Server: SAP Server" and "Web service runtime: SAP Netweaver" on the first page of the wizard, this should work.
HTH!
-Vladimir

Setting Web service runtime

Similar Messages

Maybe you are looking for