Setting Wifi Hotspot using Joikuspot light on Noki...

I am using Nokia C7, i want this to work like a Wifi hotspot so that i can connect my IPAD 2 to internet. I had installed Joikuspot light on my C7, it gets started successfully, also it is visible on my ipad and get connected but when opening any website it give error as "Invalid server name" or "Safari cannot open the page becouse it is not connected to the Internet" on my Ipad. please let me know how do o resolve this issue.

Have you checked the security settings on the iPad ? You may need to change them to None as they may be preventing the connection through Joikuspot. I don't use Apple products, but did have to change security on Windows and Joikuspot premium to get it to work !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Connect iPad 2 wifi to wifi hotspot with joikuspot

I installed joikuspot light in my nokia E71, and my iPad recognized the wifi hotspot but I still can't access Internet. Pls help

I also had the same problem, but I realized this person (Baltax) who shared in this forum how to resolve this issue. He is a god-send.
http://www.philmug.ph/forum/archive/index.php/t-72362.html
06-13-2011, 08:54 PM
Had the same problem; I connected with the device but couldn´t browse internet. Turned out to be an encryption issue; to make it work I used (in the settings for Joikuspot) WEP open, ascii, 128 bit, and let Joikuspot create the password for me. Using this it worked flawlessly.

Create WiFi Hotspot using the command promt

I was trying to create WiFi Hotspot on my Windows 7-32bit running laptop using the command promt method after followinng the instructions from here >> http://www.techswatch.com/2014/11/create-wifi-hotspot-windows-87-command-prompt.html However, the problem is, after creating the hostpot, when I enter the password it does get connected but I cannot access the internet. I am sure that I have entered the correct password else it wouldn't have got connected. Any idea what could have gone wrong? Any help would be apprecited.

Hi ihtisham301,
Thank you for visiting Sony Community!
Try to connect any different device to your home network. If other device can't connect then you may contact your Internet Service Provided (ISP) for further assistance.
If other device can connect, then try to isolate the issue. You mentioned you cannot connect to the network but you were able to enter the credentials before connecting to the network. Try to ping any website, Start -> search cmd -> once in command prompt, enter ping googe.com and hit Enter. Check the Ping statistics. Try to ping your router as well. ping [router IP address] then hit Enter. Also boot the laptop in Safe Mode with Networking -> turn off the laptop, press the power button and immediately, tap the F8 key repeatedly. Once in Advanced Boot Options, select Safe Mode with Networking.
I'm not quite sure about the process that you did. I never tried that before. And another thing is, it seems that you are using a non-U.S. model of Vaio. We usually have Windows 7-64bit computer. We have limited information with non-U.S. model of laptops.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope my suggestions help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Problem connecting to public wifi hotspot using ibook and airport

Hi
I have a brand new iBook G4, replacing an iBook G3. At home I use it to connect wirelessly or wired with my Netgear router. No problems.
Yesterday I tried to access a public, unsecured wifi hotspot in a local cafe. There were two other people there using the net, both using iBooks (high Mac density, it seems!).
Whatever I did, I simply couldn't connect. First, using the same Location I use at home (defined to only use Airport), I could see the named network, but when I selected it I got the 'could not connect' dialog. Retried, no luck.
I then created a new location, configured that to use Airport. Same problem.
I then created a new network name, and tried again. No luck. Using this last option, it actually asked me for a WEP password, even though the network was, in fact, unsecured, and the other users had not been asked this.
I do use WEP protection at home.
Any ideas?? I'd like to be mobile and networked, so I'd really like to fix this!

I presume that the iBook G3 worked fine at the location previously?
Some 802.11b access points require a firmware upgrade before 802.11g (Extreme) clients can connect.
Though 802.11g is backward compatible with 802.11b some older access points were developed before 802.11g and therefore are not in a position to allow the 802.11g clients to connect.
Note that you can attempt to persuade an Airport Extreme client to operate in 802.11b mode.
Hold down the control key [ctrl] when selecting the network from the menu.
http://docs.info.apple.com/article.html?artnum=107938
iFelix

How to globally set WiFi to use device management identity certificate for all users?

I'm using Apple's Profile Management service in Mountain Lion, and discovered through serendipity that an enrolled device can authenticate on EAP-TLS to our WPA2-Enterprise Wifi using the Device Managment Identity Certificate instead of an individually-generated-for-user x509 cert. This is extremely convenient, because then we can effectively revoke a device's cert by unenrolling the device.
However, I haven't been able to figure out how to make WiFi always designate EAP-TLS and select the Device Management Identity Certificate globally (whether through /usr/bin/networksetup or through the Profile Manager).
Does anybody have any pointers on how to do this? My goal is to have an OS X >= 10.7 machine at a network login prompt capable of logging into the machine, authenticated against the Open Directory server the machine is already bound to. At present a wireless user cannot do this, as the machine's Wifi preferences haven't yet been set to use the aforementioned device management cert.
Thanks!

Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

Is there any way to create a wifi hotspot for my macbook using my IPad?, Is there any way to create a wifi hotspot for my macbook using my IPad?

I am going to a lake cabin in Northern Minnesota for a week and need to get wifi for my Mac. Is there any way to create a wifi hotspot using my Ipad so that I have internet service for my laptop?

No, iPad can become a hot spot, but if you have an iPhone, it can tether if you have a data plan that incudes the tethering option. With AT&T for example, you can add tethering for $20 month or for $45/month, you receive tethering and 4GB of data per month. If you have the unlimited data plan from AT&T you'll unfortunately have to give it up if you want to tether. You can also go to almost any carrier and purchase a MiFi unit which may work for you. Whether iw will work in Northern Minnesota is something only your carrier could answer.

How do i create a hotspot using wifi only?

i am staying at a resort and we had to change rooms because they did not prep the first. The internet was great there, but here, sadly, i can hardly ever find a spot with a steady signal, on my phone. But my laptop does just fine so i want to make a hotspot from their wifi to my phone. Is there an app for this? I also tried creating a network, but found you cannot connect to two at a time. i have found the system settings where it says share through ethernet, but i have yet to see an ethernet cable. thanks

You can't. You can only create a WiFi hotspot using your computer if the computer is connected to the Internet via Ethernet. The WiFi radio in your laptop can not both connect to WiFi and create a WiFi network simultaneously.

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

When will MAC O/S be supported on MiFi (Fivespot) device to access the Verizon wifi hotspots?

I just got the Fivespot for Broadband internet access for my laptop. I've had it about a week, and tried the dedicated network access from home, and an internet cafe using both the USB connection, and the wifi connection. Both work fine, and speeds are very acceptable.
When I tried accessing the Verizon Wifi Hotspots--I realized they are not available on a MacBook, since you can only access the VZ wifi hotspots using the VZ Manager app. After I read the manual, realized that I could only access the VZ wifi Hotspots from Windows O/S. Good thing my MacBook has a dual OS boot (I never go into Windows anymore unless I absolutely have to--like in this case). As a side note, I had to install and setup the FiveSpot again in Windows--let me just say--even though I didn't encounter any issues--the process went much smoother using the MAC O/S.
Anyway, got VZ Manager up and running on Windows, followed the instructions to update the Verizon Wifi Hotspot locations, and then connected to the wifi location that I was in, which was a local Barnes & Noble. Please note that all Barnes & Noble, and Starbucks offer free public wifi through 'attwifi'. Thinking that the Verizon wifi hotspot would provide a faster connection speed and performance, I decided to try it. Well, the response was dismal and poor--I tried to download a 22MB file, and the connection speed showed a paltry 7 KB/minute; in the public library, I usually get a speed of 100KB/minute, and the attwifi public access usually results in 50KB/minute downloads.
Disappointed in the so-called Verizon wifi hotspots speeds.
Does anyone know when this will be accessible via the Mac OS?
Thanks!

Ironically, turning Airplane Mode on disables streaming, but still shows your entire library when shuffling. However, the unavailable songs skip, like they should. But could still be tapped to download, if there were service. I wish there was a way to separate playback from having music available for download.

Can you print from an iPad 2 using 3G in a home with no computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area

Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home. Please shed some light on this for us PLEASE. Thanks

In that case, it should be possible. I haven't tried this directly, but I believe it should work.
You'll need to get an actual AirPrint compatible Printer.
Check here for a list of Printers you can choose from.
http://support.apple.com/kb/ht4356
Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached. Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print.

How to set up wifi hotspot connectivity

I have an old laptop that was upgraded from XP to Vista Business. It runs OK but is very slow. I have Fios wireless at home and it connects fine, but the In-house Agent won't run properly (blank pages for the Internet & Phone sections...Chat tech was unhelpful). My question is: how can I set up the hotspot connectivity without having to use the worse-than-useless In-house agent?

the link I gave is for a windows machine
Droid has it's own app, and boingo is what Verizon uses - so you can safely download boingo and then when it asks for your login, you put your VZ log in info.
you DO have to create a seperate WIFI log in though, So you should go to www.verizon.net/
Hover over my verizon and then select VIEW all from the my services menu > then select internet on the left hand side menu > then select manage under the verizon wifi section.
Manage gives you two options
Find Wifi Hotspots
WiFI how to demos
Select Wifi how to demos and then click and follow the registration link
when you get there, it wants you to sign in, you sign in with your main account, and then you go through the Wi-fi registration steps to make a Verizon WIFI username
these are going to be seperate usernames, one used for your account and online access, you already have this one
and the next is one specifically for wifi hotspot access, you are creating this one (if you haven't already done so)

Unable to set the ip address for hosted network client after creating WIFI hotspot

Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicated

Hi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support

Everytime I set up my macbook as a wifi hotspot it closes the connection on my macbook. Why does that happen?

Everytime I set up my computer as a wifi hotspot it closes my computer's internet connection. Why is that happening? And What can I do?

With a Thunderbolt to Ethernet adapter in use, your MacBook Pro's Network Preferences should be similar to this:
"Status" should be "Connected", a valid IP address should appear, and you should be able to load web pages. Make that work first.
Then make your MacBook Pro's Sharing preferences resemble this:
Essentially: "Share your connection" and "To computers using" should be as shown above.
The MBP's Wi-Fi icon will be as shown below:
To other client devices, the network they join should be the name you designated. It will appear in the same manner as any other wireless network.
What are you seeing that's different than the above?

How to use Iphone5 as a wifi hotspot

I was looking to use my Iphone5 for using as Wifi Hotspot for my Ipad mini but my iphone doesn't show the option of Personal Hotspot to set this up. Plz help me with this issue.

stevejobsfan0123 wrote:
I don't think the OP can see that option.
Nipun1987 wrote:
Its that in my settings, it doesnt show personal hotspot
I was guessing they coudn't see it on the main settings page. My experience is that it doesn't show up there until you've enabled it under Cellular. Apparently, I was correct. This time.

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

Setting Wifi Hotspot using Joikuspot light on Noki...

Similar Messages

Maybe you are looking for