Settings and Center Key on the N86

Hi, Its been a while that I own the N86 now. I updated to v11.043.
Recently, I noticed that when clicking on "settings"  in the menu, it slows down the phone (sometimes it freezes) and revert to the main menu. Or, when you click on "general>Personalisation" it revert to the stand by screen, as if it crashed!
Secundo, the center key on the D-pad doesn't respond several times!
Any solutions?
Thank You! 

ive not come accross these problems back up your data and try the following
NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work. 1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345 *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
as by rad 24
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
    The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
    Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
    Sami's mom

    Sami\'s mom wrote:
    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
    You cannot.

  • Anyone know how to use a 'home' and 'end' key on the Macbook pro keyboard?

    I had a pc before, and the keyboard had home and end keys on the keyboard for quickly moving cursor to end or beginning of word or sentence.  I can't figure out if there is something like that on the Macbook pro.  It would be really helpful.  So does anyone know if there is those keys and if so what do i use?
    I'd appreciate any help. 
    Thanks

    see if any of this works for you
    On a smaller keyboard, such as the wireless, or on portables, you can use fn- left arrow for home and fn- right arrow for end.
    On a Mac, 'home and 'end' take you to the beginning and the end of document, respectively. Getting to the beginning or end of a line is done with cmd- leftarrow and cmd- rightarrow. Emacs shortcuts, such a ctrl-a and ctrl- e also work in most places, where the app is done right.

  • HT2638 since updating iPhoto it has ceased to open.  i have tried to Hold down the Command and Option keys on the keyboard but it does not work.  iPhoto still does not open

    Since updating iPhoto it has ceased to open.  I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library,  but it does not work.  iPhoto still does not open.  can someone please help?
    thank you

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Happy Holidays

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • How to make like Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data.

    dear guys how can i make like a off line Encarta encyclopedia and basic screen settings and how to lock the documents in the entire data in visual studio.                 
       thank you. 
                                                              Million
    Getu

    Dave,
    I will +1 Pixelan's products. They are great, simple, and have about the best support that I know of. When you explore, say Pixelan's SpiceMaster, dig deeply. Things appear rather mundane, on the surface, but there is so very much power lurking, just below the surface. I could almost imagine a 1000 page manual to cover every possible aspect of that program... Every time that I use it, I learn something new, and wonderful.
    Good luck,
    Hunt

  • I switched phones with my wife.  I went into "Settings" and "Store" to change the applid to mine but the phone still has my wife's applid when updating apps.  How do I get my phone to default to my applid?

    I SWITCHED PHONES WITH MY WIFE.   I WENT INTO SETTINGS AND STORE TO CHANGE THE APPLID BUT IT STILL USES MY WIFE'S APPLID WHEN UPDATING APPS.   HOW DO I GET THE APP STORE TO DEFAULT TO MY APPLID?

    Any apps that are on the iPhone which were bought / downloaded via your wife's account are tied to her account - so only her account can download updates to those apps. If you remove all her apps and just put yours on then you should be ok.

  • Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation.

    Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
    I have already tried holding down the power button and home button for 10 seconds, but no difference.

    I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
    However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
    It's happened 4 times now.  Originally it went away with a restore from backup, then worked for 2 more days.  The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances. 
    I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue.  I deleted several apps, I stopped using the games and many other apps.   I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
    I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email.  It was working when I went to bed.  I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
    However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things). 
    The two things I did between a broken keyboard and a working keyboard were:
    1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
    2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
    In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up.  Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
    Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off.  I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue.

  • How to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method.

    how to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method.  thanks

    INSERT targetdb.dbo.tbl (col1, col2, col3, ...)
       SELECT col1, col2, col3, ...
       FROM   sourcedb.dbo.tbl
    Or what is your question really about? Since you talke about foreign keys etc, I suspect that you want to transfer the entire table definition, but you cannot do that with an INSERT statement.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • TS1398 my wi-fi has full bars, says i am conected but never puts a check by the name of network,i have reset settings and it still does the same thing. i dont think it is my wi-fi because my other computers are able to get on just fine. please help.

    wi-fi has full bars, says i am conected but never puts a check by the name of network,i have reset settings and it still does the same thing. i dont think it is my wi-fi because my other computers are able to get on just fine. please help.

    There are two ends to a wifi network. Try rebooting your router.

  • HT4356 All my devices except my iPhone 4S can airprint.  Only the 4s tells me no airprint printers found.  I see no changes in the settings and I am on the same network.

    All my devices except my iPhone 4S can airprint.  Only the 4s tells me no airprint printers found.  I see no differences in the settings and I am on the same network as the printer.  Like I said, two iPads and an iPhone 4 airprint like a champ!

    Appreciate the suggestion and tried it, but still, no joy.  I even had another iPhone brought into the network and it found the printer, no problem.  It's just this one iPhone 4s.  Sounds like a trip to the Genius Bar for me!

  • Icloud was originally set up wrong and I cannot get in to change my settings and no longer know the password

    icloud was originally set up wrong and I cannot get in to change my settings and no longer know the password

    Go to http://appleid.apple.com and click 'Forgot password'. Enter the ID you set iCloud up with. A new password will be sent to your associated email address.

  • If I locked the restrictions settings and thought I knew the password but didn't apparently, is there a way to unlock it now? How?  HELP!

    If I locked the restrictions settings and thought I knew the password but didn't apparently, is there a way to unlock it now? How?  HELP!

    If you've forgotten the code, then was it on the iPad when you last synced/backed up to your computer's iTunes ? If not then you can restore to your backup. If it was on the iPad when you last backed up then you will need to reset the iPad - there is no way to override the code, and if it is on the backup then restoring to it will keep the code in place.

  • HT201272 Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

    Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

    The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
    Regards.

  • HT4759 Hi Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password. Please can you help me. thanks

    Hi
    Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
    Please can you help me.
    Grateful

    If you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
    If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808.  Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over.

Maybe you are looking for

  • Word report with Cyrillic text

    Hi all, I've never used one of these forums before so hope I'm doing right. I need to produce a word report with Russian & English text , if I set the system language to Russian I can type Russian characters in to word, but if I have a string constan

  • Sql Plus & Listener & TNSname are my problems

    I have installed Oracle Enterpise Sever on Linux Server (Open Linux of Caldera). I have installed Oracle Client on Win98 workstation. I have problem after set Net8 conf client. Servicename = oralin (same as server) Protocol = TCP (same as server) Hos

  • Updation of order value in T code FD33

    Hi, I am facing a problem of incorrect updation of order value in T code FD33 (Customer credit management-Display). When I analyzed the individual data, I could find that the value of particular Sales document type (ZCAL) is not getting updated in FD

  • Making System Calls

    This question has two parts, though they are related. (My goal, in case anyone's curious, is to make a view that can find and index Dilbert cartoons saved on my hard drive.) 1. Can Java call system functions, such as "dir" (on a Windows PC), and catc

  • Can Aperture use Iweb pages?

    Greetings All: I've got several site that have been created using Iweb. But would like to generate the photo type pages using Aperture and then melt the two together. Is it possible to import my Iweb template into Aperture so the photo pages will loo