Settings at User Level

Hi
I need to set the F4 Help to Dialog(Modal) for each of the Iview from Menu > Help > Settings option from every Iview. Now I have plenty of users acessing such kind of Iviews. How do I make this setting common to all users and all Iview also ?
Murali.

hi
its depends on which setting u want default
like u can default plant and other field defult in PO using default values button in PO only
then u can default some fields using parameter ID and setting the default value for it in Su01
be clear on which field s u need to be user specific default

Similar Messages

  • Default settings at User level

    Hi All,
    Please explain how to do the default settings at User level.
    Appreciate early action.

    hi
    its depends on which setting u want default
    like u can default plant and other field defult in PO using default values button in PO only
    then u can default some fields using parameter ID and setting the default value for it in Su01
    be clear on which field s u need to be user specific default

  • Error while performing Risk Analysis at user level for a cross system user

    Dear All,
    I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
    The error is as follows:
    "ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
    Can anyone please help.
    Regards,
    Gurugobinda

    Hi..
    Check the note # SAP Note 1121978
    SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
    Check for the following...
    CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
    ChangeThreadCountStep =50
    InitialThreadCount= 100
    MaxThreadCount =200
    MinThreadCount =50
    Regards
    Gangadhar

  • Permissions set at USER level

    Can I just confirm, that if I open a User within Server settings and I see any of the Global permission tickboxes ticked then these have at some point been set at the User Level. If however, best practice has been observed and users have only ever been
    selected against groups then I should NOT see any boxes in any of the Users permissions ticked at all?  Is that correct?
    Thanks in advance,
    Steve

    Steve --
    You are absolutely right, my friend.  If you see ANY checkboxes selected in the Categories or Global Permissions sections of a User page, then these selections represent an override to the permissions specified by the Groups to which the user belongs.
     Best practice dictates that permissions for each user be controlled by adding the user to Groups, which makes for a simpler and easier to understand security model.  This is a GREAT question, my friend, and I applaud you for asking it.  :)
    Dale A. Howard [MVP]

  • Any way to have email address of the user in user level analysis report?

    Hi,
    Is their any way to get the users email address column in User Level Analysis report Result..??
    Any way or settings to add custom columns or the email address column in the displayed columns of the report ??

    Hi Pranjal
    If it's not an option to add the column from the screen you would need to look at customising the scren
    Below is an example for a different screen layout scenario
    Customizing Access Control Screens
    Regards
    Colleen

  • User level settengs for Report Painter GR55

    HI All,
    When user is trying to extract a cost center report from Report Painter GR55. User is not getting the values for few line items for last FI year (2010) and he is able to see the values for current year (2011).
    Tried with parameters, authorizations and settings with other user (able to see the report) who is having same roles authorizations.
    Please suggest if there are any user level setting related to above.
    Regards,
    Hamed

    did you check in transaction RPC0?
    Maybe you have some value at user settings level.
    br, Guido

  • Settings for USER MASTER in PRINTING?

    In The tcode : CO02 for Prod Order , I specify under menu path : Order-settings-listcontrol-for Lp01 printer : 0909 . In the user master record the printer SPLD is 7205. I want that the printer setting on the screen ( 0909 ) should override the settings for user. So , I went to tcode opk8 and in the Print COntrol -> selected output device = 2 ( 1 is for user , 3 is for print control ) . I tried to print the form riding the user master setting , but it is not working . WHen i go and check the Print Determination : I see that it populates the print control from User master only ?
    Any idea how can i override this setting ?
    note : this List Control calls a Zprogram that calls a Smartform .

    Hi Divya,
    you can use tcode opk8 to create new entries under  : Refernce Order Types -> Print Programs and can specify your driver prog name there which will call your smartform .
    You can also do setting for each List Type you create in : the : Spool Parameter for user . there you can specify properties of list based on : User name or on the Plant level .
    In the driver program i did something like this :
      read table caufvd_tab index 1.
      case caufvd_tab-werks.
        when '7200'.
          i_formname = 'ZSF_OBJECT_LIST'.
        when '9200'.
          i_formname = 'ZSF_OBJECT_LIST'.
        when others.
          i_formname = 'ZSF_OBJECT_LIST'.
      endcase.
    Hope this helps . If you have any queries let me know .
    Thanks
    Message was edited by: SAP BEE

  • Setting Default Url At User Level? Help !!

    Hi-
    After a user logs on .. I would like to point that user to a specific default url .. if I specify the default url at the domain level:
    manage domains
    select domain
    select user tab
    show advanced settings
    delete default url: /DesktopServlet
    add new url
    It works fine when the default url is set at this level .. problem is it then points EVERY user who is a member of that domain to the specified url ..
    Logically.. one would think that the correct approach would be to specify the defaul url for a particular user at the user level:
    manage domains
    select domain
    select role
    select users
    click username
    click user tab
    show advanced settings
    delete default url: /DesktopServlet
    add new url
    However, when this approach is used .. the user is sent to:
    /DesktopServlet
    in spite of the fact that the users default url had been set to a specific url other than:
    /DesktopServlet
    Question:
    Is it possible to set a users default url to a specified url and have it only affect that user?
    If so .. how?
    Does anyone have any recommendations as to how to make this work?
    Essentially .. I would like to create a domain with multiple users and have each user within that domain sent to a distinct and unique url .. how can I accomplish this objective?
    And if it simpy can't be done .. please let me know .. it would be much appreciated .. Happy Holidays .. to all ..
    Sincerely .. jesus ..

    Thanks for your response .. as it is .. I was able to accomplish the stated objective by using the Url Scraper to point each user to a page containing a meta-refresh tag which causes the desktop to appear for a fraction of a second before the user is advanced to the desired url .. sans the desktop and with the secure lock in the right hand corner .. thanks again for your response .. much appreciated .. jesus ..

  • User Level permissions (ACLs) - HOW?

    Dear Expert,
    One more victim of Mackeeper writing to you seeking help...
    I tried my best to remove it from the comp and I have succeded.
    However, I am stuck at 2 points:
    1) How User Level permissions (ACLs)? Please guide....
    2) Mackeeper keeps opening pages in safari on its own, whenever I open a new tab. Please GUIDE.
    Please help.....
    Look forward to receiving valuable inputs.
    Regards,
    Sony Thadani

    There is no need to download anything to solve this problem.
    You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
    Back up all data before making any changes.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have an adware variant not covered by the support article. Ask for instructions in that case.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • Push settings to users on a mac doesn't seem to work.

    I've setup various profiles for devices and users. Settings for ios devices works fine but settings for users on a mac seem to hang indefinetely. IT keeps sending in my profile manager and never seems to be able to push the settings.
    I keep getting messages like the following, anyone an idea ?
    Aug 17 21:08:21 iserve.ath.cx ruby[458] <Info>: Pruning certificate chain to 18446744073709551615
    Aug 17 21:08:21 iserve.ath.cx ruby[458] <Debug>: Trying to add a bogus certificate
    Aug 17 21:08:21 iserve.ath.cx ruby[458] <Debug>: An error occured while inserting an untrusted certificate into the chain
    All mac's have the trusted certificate installed and are enrolled.
    I have no clue how to solve this.
    Arno

    Sure - thanks for your help.
    Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: ServermgrDevicemgr starting...
    Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: default_profile_created_at_least_once was already true
    Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
    Jan 18 14:44:20 server.mydomain.com ProfileManager[9359] <Info>: ServermgrDevicemgr done!
    Jan 18 15:04:43 server.mydomain.com ProfileManager[532] <Info>: DemandProcess: running with arguments '-e production'
    Jan 18 15:04:45 server.mydomain.com ruby[532] <Info>: Pruning certificate chain to 18446744073709551615
    Jan 18 15:04:45 server.mydomain.com ruby[532] <Debug>: Trying to add a bogus certificate
    Jan 18 15:04:45 server.mydomain.com ruby[532] <Debug>: An error occured while inserting an untrusted certificate into the chain
    Jan 18 15:04:45 server.mydomain.com ProfileManager[532] <Info>: Pushed to <LabSession:'MyUsername@ComputerImUsing'> with token sxXIeO/L4l/Pwa/1McJu83m048GBa+xH2SR+KRF1Xds=, {"time":"1358521484.604173","mdm":""}
    Jan 18 15:04:50 server.mydomain.com ProfileManager[532] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
    Jan 18 15:04:51 server.mydomain.com ProfileManager[532] <Warning>: ** has_many_polymorphs: Warning; not all usage scenarios for polymorphic scopes are supported yet.
    Jan 18 15:04:51 server.mydomain.com ruby[532] <Info>: Pruning certificate chain to 18446744073709551615
    Jan 18 15:04:51 server.mydomain.com ruby[532] <Debug>: Trying to add a bogus certificate
    Jan 18 15:04:51 server.mydomain.com ruby[532] <Debug>: An error occured while inserting an untrusted certificate into the chain
    Jan 18 15:04:51 server.mydomain.com ProfileManager[532] <Info>: Pushed to <LabSession:'MyUsername@ComputerImUsing'> with token sxXIeO/L4l/Pwa/1McJu83m048GBa+xH2SR+KRF1Xds=, {"time":"1358521491.205980","mdm":""}
    Jan 18 15:09:51 server.mydomain.com ProfileManager[532] <Info>: DemandProcess: quitting after 300 seconds of inactivity
    This is the computer that I'm playing with, just assigning it to myself in the profile manager, which causes the profile to be 'pushed' supposedly, and obviously.
    Thanks again.

  • Make all the forms at a user level or responsibility level to be read only

    Hi,
    Please suggest me to make all the forms at a user level or responsibility level to be read only. So that when a particular user logs in, he gets all the form in read only mode or at a particular responsibility all the forms are read only so that we can attach this responsibility to the user for the same purpose.
    Any ideas will be highly appreciated.

    check this blog,
    http://www.oracleappshub.com/11i/oracleapps-responsibility-vs-sap-functions/
    Re: How to change OM responsibility as read-only in oracle applications 11i
    read only responsibility-user

  • How to create a profile value at user level programatically

    Dear all,
    I want to create a profile value at user level programatically, I refer to the developer guide and try to use fnd_profile.put() to create a new value.
    But I find out the value is just created in session level, not be inserted into base table.
    So is there anyone know how to realize this function in PL/SQL?
    Any idea is appreciated.
    Best Regards,
    Kenny

    Check Note: 364503.1 - How to Set a System Profile Value Without Logging in to the Applications
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364503.1

  • LaserJet P1505n printing slow just for user-level accounts in Win7

    I have several workstations running Win7 Pro 64-bit that have been installed as replacements for XP machines.  All of them print to one of several P1505n printers, and are using the latest drivers from HP.  Under XP there were no problems printing to these printers, but the Win7 machines have significant delays when trying to print.  The Windows test page prints instantaneously, but printing from any other application has a delay of up to a full minute before the job begins to print.  Once the job prints, it prints without issue.
    One thing that I have noticed during my testing seems to point to permissions.  If I am logged in using my admin-level account, everything prints as it should, with no delays at all.  Once I log in with a user-level account, however, the delays begin.  I found the driver files at C:\Windows\System32\spool\drivers\x64\3, but giving "everyone" full control over those files does not help.
    Is there anything else that I should be looking at?
    Thanks in advance!
    Donny

    In the end, I was able to resolve the problem by installing the Vista x64 drivers.  No playing with permissions necessary.

  • Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

    Hello,
    I have a Windows Server 2012 R2.
    I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
    on it (this machine is also a domain client in the same domain).
    I will really be thankful if anyone can suggest some solution to this issue.
    Please feel free to write back in-case I have missed anything obvious to be shared.
    Thanks!
    -Vinay Pugalia
    If a post answers your question, please click "Mark As Answer" on that post or
    "Vote as Helpful".
    Web : Inkey Solutions
    Blog : My Blog
    Email : Vinay Pugalia

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedbackhere.
    Andy Qi
    TechNet Community Support

  • Issue in User Level Simulation in GRC 10.0

    Hello Every one,
    Before i Jump into the question, please find below the screen shot which tells about the B.P(Business process),Functions created in test system(GRC 10.0), where as the roles and corresponding users which have been created in back end system connecting to GRC 10.0.
    Now when i am trying to run a risk analysis on user TEST_RISK(TEST_ROLE_RISK role is assigned and pfa the authorizations in the role), i will be shown the Risk R001.
    Now i am trying to run user Level Simulation on the above user TEST_RISK and i am trying to simulate by adding a new role TEST_ROLE_RISK3 as shown in the below screenshot at Action level,Permission Level,Critical Action level ,Critical permission level.
    Even though i select the option, Risk from Simulation only, when i try to execute at action level , it is also showing me the risk which coming from the actual role assigned but not from the simulating one.
    Thanks and Regards,
    Naga.

    Hi Naga,
    there are some notes which might help to fix the problem. Especially the first might fix your problem.
    http://service.sap.com/sap/support/notes/1895502
    http://service.sap.com/sap/support/notes/1953347
    Please let us know if it helped.
    Regards,
    Alessandro

Maybe you are looking for