Settings being reset every time

I am running PPro CS4 on a mac and every time I start it up it looks like all the settings I'd changed last time i was in it (keyboard shortcuts, settings to how project bins should open, how the timeline should scrub etc.) are reverting back to the defaults. I thought that it might be that the settings always reset when you started a new project, but this is happening even when I reopen the previous project. Is anybody else seing this?
I am using PPro in an administrator level account (the main account that the computer starts up in). I figure it must be a file permissions issue or a PPro bug. ButI'm not sure how to find out which.

I don't know where it is in the MAC directory structure, but if you search the forum for
info about the preferences files you should be able to find it.
Before you open Premiere, Make a backup of the preferences file or just move it someplace else and then open Premiere. This should force the program to create a new preferences file and should work properly after you've reset your choices.
HTH,

Similar Messages

After resetting my backbook pro to factory settings, it freezes every time it boots up. What's the problem?

After resetting my backbook pro to factory settings, it freezes every time it boots up. What's the problem?

by the way, you can also try to safe boot up your mac for safe mode. maybe it can work and you can deal with problem there.
for safe boot:
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

HT201210 my iphone is being dissmissed every time i try to conectt to my home wifi

my iphone is being dissmissed every time i try to conectt to my home wifi

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

Why new tabs are being raised every time while I'm using safari asking for a MAC clean up?

Why new tabs are being raised every time while I'm using safari asking for a MAC clean up?

Click here and follow the instructions, or if desired, run Adware Medic.
(114878)

Po is being outputed every time

My PO´s are being outputted every time we make a modification, not just when they are Released. My problem is that we have a release indicator 6, because a minimum modification will trigger a new strategy or an update.
How should I configure the Messages for avoiding this ?
Thank you very much!!!
Lorena

Hi Maria Lorena,
There is a parameter on the own PO where you define the "Dispatch Time" - and probably in your case this parameter is marked with "send immediatelly", but you could change it. Verify it on Messages button in the PO and after click the "Further Data" button, and then you will find this parameter.
I hope it can helps you.
regards.
Karina.

My preferences in Finder Resets every time I open it

Am having some teething trouble with the new Finder application in OSX Lion.
Seems to work ok, but I'd like to add some items to the sidebar. Easy enough to do this via preferences, however each time I reopen Finder it has reset the sidebar back to it's default settings, and have to manually add it again.
Is this normal? very frustrating to have to add it every time I open it.

Details like websites remembering you (log you in automatically) are stored in a cookie.
*Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
*Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

Time settings messed up every time I turn the compter off

Hello,
I just got my macbook pro a week ago, and every time I shut down the computer the time seetings get messed up. I unchecked the automatic update, I even locked the settings and it still does it. It is really annoying to set the time correctly every time I turn the computer on. Could anybody help me with that ?

Hi
Interesting, this is normally as a result of the internal battery being dead. Is this Macbook new or second-hand? If new, & from Apple, would get in contact with them.
Steve

GOOGLE search, Why am I being redirected every time I use google search.

This is new just since the firefox 4 download. I am redirected every time I use google search. This is a business only computer, and it is terrible trying to quote a price when you can't get to a website.

1.To stop all JS.Twettir processes, press CTRL+ALT+DELETE to open the Windows Task Manager.
2.Click on the "Processes" tab, search for JS.Twettir, then right-click it and select "End Process" key.
3.Delete Temporary Internet files,Cookies,Cache & History of all the browsers present in your system.
4.Check the internet settings of your browser for any unwanted Proxy settings.If it is there then remove it & set it to 'Automatically Detect Settings'.It might be as below - IP Address - 127.0.0.1 Port No - 80
5.Check if unnecessary DNS IP's are present in 'Local Area Connection Properties'.
6.Open command prompt & run the below commands - ipconfig /flushdns.
7.The registry entries of Google search results being redirected Virus that need to be removed are listed as follows:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
lsass = "%System%\lsass.exe"
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\SubSystems /sub
Reference: [[http://blog.teesupport.com/best-way-to-fix-google-search-results-being-redirected-virus-in-firefox/]]

Why the taskbar(KDE 4) is resetted every time?

Hi, guys. In my KDE4, the taskbar was reseted so I have to resize it every time. Anyone knows this?
Check the image, see the taskbar? The size of it is always not fill the width of the screen.
By kartwall at 2008-12-16
Last edited by kartwall (2008-12-17 06:38:42)

Actually, you don't even need to logout and log in if you do
kquitapp plasma & plasma
In any case, however, your kde does not quit cleanly and therefore does not save the plasma settings. If the problem is plasma (or some plasma widget), you should get a backtrace in konsole when issuing the above command. If not, something else screws with kde's shutdown.

Brand new Nano freezes on songs. Have to reset every time I use it.

I bought a new 2 Gig Nano last month. Nearly every time I play music, it freezes before starting the first song. I have to reset it (holding down the center and top buttons) to get it started again. After the reset, it works fine.
Any suggestions? Should I bring it back to the Apple Store?

Try a restore first.
See: How to restore the iPod to factory settings.

V240 ALOM resets every time it requests an IP address through DHCP

I'm encountering an issue with an ALOM configured to DHCP. Every time it requests an IP address (tracked by watching messages on the DHCP server, which is running Red Hat EL4 update 4), the ALOM resets. All the POSTs pass. If it's configured for a static IP, it stops resetting, but immediately begins doing it again if switched back. I've encountered this with two different ALOMs on different V240s, so I'm guessing it's not hardware, but it hasn't happened 100% of the time either (it seems to DHCP fine most of the time, then it will get into this state and stay there).
Here's output from the reset grabbed from the serial console:
sc>
ALOM BOOTMON v1.6.5
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
Sun(tm) Advanced Lights Out Manager 1.6.5 (Pool0007)
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: WED OCT 31 11:10:38 2007
Wait, 1 - 3 seconds
Read the TOD Clock: WED OCT 31 11:10:40 2007
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
SC Alert: SC System booted.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
Please login:
Serial line login timeout, returns to console stream.
Enter #. to return to ALOM.
ALOM BOOTMON v1.6.5
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
Sun(tm) Advanced Lights Out Manager 1.6.5 (Pool0007)
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: WED OCT 31 11:18:36 2007
Wait, 1 - 3 seconds
Read the TOD Clock: WED OCT 31 11:18:38 2007
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
SC Alert: SC System booted.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
Please login:

Look in XP control panel/device manager. Check Network Adapters, is there a yellow tick on the Nvidia nForce Networking Controller?
Click on nVidia and select the Driver tab. My Driver Provider is NVIDIA, Driver Date: 4/6/2005, Driver Version: 4.8.2.0 and it is Digitally Signed. The Nvidia driver file version is 1.00.00.0482. Mine works fine.
Have you tried the Marvell Yukon NIC? That should work.
Bob...

IPod won't appear in iTunes or Desktop until I reset every time

Hi All. Sorry if this has been covered. I read the article on this (http://docs.info.apple.com/article.html?artnum=60950), but it didn't help.
My problem:
I have the 30gb 5th-gen iPod and an Intel 1.83 Mac mini (10.4.8). Recently, every time I plug in the iPod, the computer refuses to mount it. The iPod screen displays the "Do not disconnect" message, but the computer and iTunes don't see it. If I perform a soft reset (middle button + Menu) the computer will then recognize the iPod, but I have to do this every time!
I looked at and tried the suggestions in the Apple support document listed above, but none of them resolve the issue. Any thoughts?
Thanks,
Kevin

I have a similar problem well its more serious though -- I accidentally unplugged my 80 GB video iPod prematurely from my Intel based Mac Mini without ejecting it in iTunes and now the iPod is stuck on the Do Not Disconnect screen even after it was unplugged -- plugging it back in does not help any.
I have tried restarting my Mac Mini with it plugged in does not help at all -- tried pressing the hold switch back and forth on my iPod a 5th generation video version nothing -- iPod does not appear on my Mac Desktop, any Finder windows nor does it appear in Disk Utility or iTunes.

Must reset every time to eject

We have a 3rd Gen Nano and 4th Gen and neither one will eject properly. Most times they will appear to be disconnecting, then half way thru ejection the Nano screen reverts back to 'connected' and iTunes will indicate that another application is using a file. I have to reset them *every time* in order to eject them properly. Ejecting from Windows does not work either.
The 3rd gen is just over 2 yrs old and the 4th gen is under 1 year. Problem happens with the XP machine and with Vista 64-bit on a new laptop. While this works, I can't imagine it is good for the iPods. Comments, suggestions?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

Time Capsule needs to be reset every time I print wirelessly or watch Apple TV

Hello all!
My Time Capsule keeps dropping my wireless printer and Apple TV. Every time I want to stream a movie to my Apple TV it needs to be reset, and everytime I want to print wirelessly it needs to be reset. However, my internet connection remains constant and never has any interuptions.
Please help, it's getting really annoying to run upstairs to reset the time capsule every time I wanna watch a movie.
Thanks

It is reported here all the time that the TC needs daily reboots.. you are highly fortunate that it is only weekly..
The fact is the old TC using 7.5 firmware was probably hugely more reliable than the current one which is not able to be flashed back beyond 7.6. There is a bug.. and as yet no Apple confession of issues.
But most people can get away without a reboot.. you just need to disconnect all users.. which was an option in the v5 utility.. now left out of v6.
Strongly recommend you install v5 utility.
(Or get electrical timer to restart the TC on a nightly basis).
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

Settings being reset every time

Similar Messages

Maybe you are looking for