Settings can no longer be searched after KB2919355

I installed this big milestone update KB2919355 about an hour ago. I heard so many good words about it and I was eager to get it.
I have noticed that searching settings no longer works. It was working before the update. I installed the update alone (i.e. not together with other updates). I checked the search immediately before and after the update.
I am wondering if anyone else has experienced this and whether there is a remedy.
The following is a screenshot long after the search work "update" is entered:
Hong

Hi,
You are right, some settings should take some time to resume after first restarting from configuration updates.
My search is working fine after installing update 1 with no problem.
I do hope you will enjoy the improvement is Windows 8.1 update 1.
Kate Li
TechNet Community Support

Similar Messages

Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

I can no longer rotate photos after importing them.

I can no longer rotate photos after importing them. This option was available before they last update.

There is another current discussion about this going on. I copied it and pasted the answer here.
"Your functionallity is on an IPAD 2. This forum is refering to an IPAD 1!
I spoke to Apple technical support and they concur.
The feature was available on IOS 4.3 and was removed in IOS 5.
They directed me to 3rd Party Software. I told them this is not an anwser since I have 100's of picture which must be loaded in the the 3rd Party Software Rotated individually and saved back into the Save Folder.
They said if they have enough compliants it will be fixed in the next rev."
Here is the link to the thread.
https://discussions.apple.com/message/16855424#16855424

Can no longer send mail after installing Yosemite

can no longer send mail after installing Yosemite

Hi nwpmike,
When I uncheck "SSL" it's working well, but it's not very secure. When I leave SSL, I got in "Connection Doctor" the message "Trying to log in to this SMTP account failed. Verify that the username and password are correct.", only for the SMTP. For the IMAP, the status in Green. It's also working well on the iPhone 6 with ios8 and other mac with OS X 10.9 and previous versions.
The only thing that can be involved is that the certificat used by my mail provider is expired.
With connection docteur, there is a button "Show Details". Here is the conversation when connecting to the smtp.
READ Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-STARTTLS
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
STARTTLS
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
STARTTLS
WROTE Oct 18 23:33:53.364 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
STARTTLS
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
220 ready for tls
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
220 ready for tls
READ Oct 18 23:33:53.433 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
220 ready for tls
WROTE Oct 18 23:33:53.642 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
EHLO [10.0.0.108]
READ Oct 18 23:33:53.698 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.699 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
QUIT
WROTE Oct 18 23:33:53.777 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
EHLO [10.0.0.108]
WROTE Oct 18 23:33:53.778 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
EHLO [10.0.0.108]
READ Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
QUIT
READ Oct 18 23:33:53.842 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.843 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
QUIT

Can no longer dual boot after upgrade

Hi I used to run mac osx 10.7 dual booting with ubuntu 13.04. I used to press alt at startup to view the different partitions and select the appropriate OS. After upgrading to 10.9 I can no longer see the ubuntu partition when pressing alt. The disk is still there intact, but there is no way I can directly boot to it from startup. I tried creating another partition using disk utility and installing a fresh copy of linux and using the old linux partition as backup but whenever I select the ex-fat (or any other type for that matter) (for linux) I get:
File system resize support required, such as HFS+ with Journaling enabled.
I erased osx 10.9 and reset to factory settings back to 10.8 but the same problem continues.
I am not sure what to do to get dual booting working again. I do have an ubuntu backup on an external drive, but I would prefer not reformatting that partition.

I don't know why you couldn't repartition the disk using Disk Utility. You would have to provide more information about why you can't.
As for OPTION booting Ubuntu I'm not sure how that worked. Typically Ubuntu installs the GRUB bootloader/manager that provides a text menu from which you select which OS to start. GRUB replaces the OS X boot manager.

Can no longer browse network after updates

I finally got the Migration from SBS 2003 to Server 2012R2 standard finished but after updates I can no longer browse network from the server, it was working fine before the 52 updates went on.
I have checked computer browser is running, DNS is working, check FDRP is running.
Have Googled many articles regarding this and tried a lot of the solutions to no avail.

Hi,
On current situation, please also refer to following steps and check something more.
1. Please check if NetBIOS over TCP/IP is enabled.
2. Please temporarily disable Firewall and monitor the result.
3.
àI have checked computer browser is running
Please temporarily stop Computer Browser service and then re-start it. Any difference?
4. Please follow the path: Control Panel-> Network and Sharing Center-> Change advanced sharing settings, then check if turn on
Network discovery and File and printer sharing.
Meanwhile, would you please run
net view command and let me know the result? (Please hide all protected or private information.)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Find my Friends can no longer be installed after iOS8

I Have had Find my Friends on my iPhone with iOS 6 and then 7 and used to work fine, but since I upgraded to iOS8 I can no longer install the App, it will start to install and then delete itself from the home screen. It will have all the entries in the Settings menus until the iPhone is restarted, this is as if it's forbidden to be installed on my iPhone. It's iPhone 5 model ND662KH/A.
i tried different Apple IDs but no change on this phone. The same can be installed on my iPad and there it works properly, just why it will not install on my iPhone 5?!!

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can no longer sync iPad2 after updating to ios7

When I looked for upgrades for my apps there was the ios7, asking me if I wanted to upgrade and I wish I hadn't. I lost all email function on my ipad, and it erased all previous emails stored on there. I can no longer sync my iPad, since my computer is an older iMac with version 10.5.8 OSX and is not linked to iCloud so now I cannot backup NOR sync my iPad. I am very ******. Does anyone know how to dump ios7 off the ipad and go back to ios6? OR how to fix any of these problems without me buying a new iMac? I cannot upgrade my iMac to the latest OS, it's too old. Thanks for ANY help. ANYTHING would be appreciated.

All,
When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
It may be that we have removed it. The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
Is it possible that you have a touch model and applied the non-touch BIOS?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can no longer find printer after upgrade to 10.6.7

I recently upgraded to 10.6.7 and now I can no longer find our network printer.
I am connecting by ethernet to a Konica Minolta IP-432 PS. I have updated the printer driver.
When I go to system pref to add this printer it is no longer being "found" .
Any help would be appreciated.

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

Can no longer open CS6 after CS6 Extended expired.

Somehow I got a trial for CS6 Extended which has expired. Now I can no longer open my CS6. Help!

Did you buy CS6, but not extended?

Can no longer overclock CPU after installing 4890 Cyclone OC

I recently purchased a MSI 4890 Cyclone OC to replace my XFX 8800 GT. With the 8800 GT, I was able to overclock my E8400 to 3.6 GHz from 3 GHz stock. After I installed the 4890, my PC will no longer accept any CPU overclock. When I power on my system with any OC, the PC will start to come up, power cycle itself before POST and reset the BIOS back to default clock speeds, and finish booting into Windows XP Home. Even with no OC, the PC seems to take longer to POST than with the 8800 GT.
I uninstalled the Nvidia driver before installing the 4890 and installed the latest ATI driver v. 9.8. I flashed my motherboard's BIOS to the latest version, set it to the defaults, and then put my OC settings back in. However, that didn't help.
I read in the NCIX forum that someone else had this exact same problem with his 4890 Cyclone, and he had a different model Gigabyte board. I'm wondering if there is some sort of incompatibility. Thanks for any help.

Quote
I put my 8800 GT back into my PC and I can overclock my CPU just fine again.
Yes, I understood you the first time.
Quote
I have not talked to Gigabyte yet since my problems only occur with the 4890 installed.
That it precisely why I suggested to contact Gigabyte. Maybe they can reproduce it and come up with a BIOS Fix or something. I had a 4890 Cyclone here for testing last week which I used to build a system for a friend. I had no such issues when I tested the card in my P45 Platinum (E6600 overclocked to 400 x 9) and he also has no problems on his P45 Asus Board (OCed Q9650).

Sudden change in network settings - can no longer access web sites

All of a sudden, I am no longer able to access any web sites on my Mac Mini. Everything was working fine and then yesterday I tried to get on-line to look something up and it didn't work.
I restarted the computer, checked internet connectivity - which all appeared to be working correctly. When I went to check my System Preferences, Network - I got a message that pops up telling me my network settings had changed but it hangs there and when I click OK, it just hangs. I have to force quit to exit the network settings. The only change I've made recently has been to load Genius to itunes.

I too have noticed that there's a split second after typing return that you can click on something (I've done "edit locations" in the pop-up). It solves temporarily, but seems to come back whenever you reboot or log in.
I'm trying to decide if I have an additional problem or is a further complication: I'm using DSL through ethernet with the phone company. The symptoms of my intermittent problem are that sometimes I suddenly can't receive back web pages or email...loading a page or getting mail will simply time out without response. All other indications, however are that the connection is still good including status lights on the DSL modem and using the network utility to test a URL look up. I might attribute this to the security update bug, but two other machines that connect through the same hub and modem get no action either once this happens (TiPB running 10.4.3 & Prismo running 10.3.9). Is there any chance that the security update on the AlPb with 10.4.11 is blocking incoming traffic by setting something out at the DSL modem?

Can no longer use SMS after update to IOS 8.2

what at happened with the update to SMS messages on the iPad?
I was able to use SMS as well as iMessage on my iPad until I updated it to 8.2. Now I cannot use SMS at all. In settings -messages, there is no longer a toggle for "send as SMS" on/off as there used to be and as there still is on my iPhone after the update. There is also no longer a toggle for "MMS" Messaging nor Group messaging.
As I said, my iPhone is fine after the update.

IN your iPhone go to settings-messages-text mmessage forwarding. Tap on that and tap on the green toggle to turn it off.
THen go go back out of setting and then go back in and repeat the steps again and turn that option to forward text messages back on.
you will then get a message to put in a code that appears on your iPad. Look at your iPad and the message will be there with the code that you need to put in your phone.
ENter er that code in your phone and it should work.
THe he only thing is that I don't remember if I turned my phone off and then back on after I turned the setting off and then back on again before I turned that text forward setting back to on. So if the above does not work then try turning your phone off and then back on in between.
I Hope this fixes it for you. Let me know!

IdeaPad U310 touch: Can no longer enter bios after updating to latest version

I flashed to the latest U310 bios (http://download.lenovo.com/consumer/mobiles/65cn99ww.exe). I switched to "legacy boot mode" (from UEFI), in an attempt to workaround a driver issue. Now, I'm no longer able to enter BIOS whatsoever. There are plenty of forum posts by many users hitting the same or similar issues on U310/U410/U330 and similar ideapad products. But the resolutions where they exists are either invalid, or involve flashing to 65cn99ww.exe, which is not possible.
[Environment]
Lenovo IdeaPad U310 touch, Windows 8 (also tried Windows 8.1)
[What I did]
Flashed BIOS using official Lenovo bits (65cn99ww.exe). No errors occured
Enter BIOS afterwards and change to legacy boot mode (from UEFI)
[Problem]
Cannot enter BIOS to view or change any settings.
[Debugging]
Try to enter BIOS by key button sequence.
1. Tried the following combinations during bootup: F2, Fn+Fn, F10, Fn+F10, F1, Fn+F1, 'B', 'N', Fn+'B', Fn+'N', Delete, Esc.
==> No change in behaviour. I tried each many times in case the timing is important.
2. Boot by Novo button. This brings up a menu, which includes an entry to enter BIOS. However, choosing that menu entry boots to Windows
3. Reboot to UEFI firmware settings from Windows (Settings/General/Advanced/UEFI). I can choose to boot to UEFI settings, but ultimately, just boots to Windows 8.
4. Try to reflash BIOS. Fails with error 182: Version less than or equal. So reflash fails
5. Try to reflash old BIOS. Flashing fails
6. Unplug battery from motherboard for 1 minute. No difference in behavior
7. Boot with SATA disconnected.
8. Try various flashing options and alternate ways to flash. Not successful
[Conclusion - BIOS is faulty]
I think this problem can be solved easily with a slightly newer variant of the BIOS being officially released by Lenovo. If someone from Lenovo is reading, can you please open an internal case on this.
Otherwise, I'm open to suggestions from the community. Does anyone know how I can hex edit the bios version #.
Thanks
Solved!
Go to Solution.

All,
When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
It may be that we have removed it. The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
Is it possible that you have a touch model and applied the non-touch BIOS?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Settings can no longer be searched after KB2919355

Similar Messages

Maybe you are looking for