Settings | Cellular | Enabled LTE

iPhone 6, iOS 8.1.1, Incipio Feather case (black), wearing brown fleece jacket, currently 42° outside
After regular checks on my AT&T data usage, while constantly on Wi-Fi at home, I've noticed that my phone used ~50MB of data overnight...just sitting on the nightstand. Told a friend about this and he suggested I switch LTE from "Voice & Data" to "Data Only".
While I'm not sure this config change would solve the issue, I have two questions:
1. What do you think could be running up the data usage while on a fully operational Wi-Fi connection?
2. What are the side-effects of switching LTE to "Data Only"? Does this only mean that voice called can't be placed over the LTE data network or does it mean something more?
Thanks in advance for your assistance.

1. If it's not plugged into power, the WiFi radio will be disabled when the phone is in standby to conserve battery power. You can check Settings>Cellular to see exactly what is using cellular data and how much.
2. I'm not positive, but I believe your interpretation is correct. When you are on a call, your data will be dropped down to "4G" HSPA+ instead of LTE. With LTE set to Voice and Data, it should stay on the LTE network. The end result being slower data transfers when you're on a call.

Similar Messages

HT1807 in the general setting, i turned off cellular and made sure that the cellular date, enable lte and data roaming was off. if when off, i was receiving telephone calls while travelling in the usa

while travelling in the usa, i turned off cellular in settings and also made sure that the cellular data, enable lte and data roaming was off. \however, i was still receiging telephone calls

Turning off cellular data doesn't turn off the ability of the phone to make or receive phone calls. In order to do that, you'd need to put the phone in Airplane Mode.

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

Iphone 5 Enable LTE

I have Iphone 5 here in Oman. But there is no any option of Enable LTE in cellular settings. Why is it so? Mobile Operators have LTE services and my SIM is also privisioned with LTE.\
I cannot see an option of "Enable LTE" at all ......
Carrier Supports LTE for iPhone 5 - Middle East 3 Country Supports UAE,Saudi Arabia,Kuwait but Oman ( omantel ) ?

Carriers must be listed as supported LTE carriers by Apple to make the functionality available. There are no carriers in Oman that support LTE based on Apples requirements. http://www.apple.com/iphone/LTE/

HT1688 iPhone 5S, Settings Cellular Use Cellular Data For Apps - Not Updating

I have iPhone 5S iOS 7.0.4 with AT&T Contractual Plan.
When I change any settings in Settings > Cellular > Use Cellular Data For to disable or enable apps to use cellular data. And, if I exit and enter again it shows the old settings.
Also Call Time > Current Period is not updating.
This is happening for last one week. I have also noticed heavy cellular data usage for last one week.
I have reset the phone as a new phone this it is solved, but if I restore from my backup, then the problem is returning again. Even I have deleted some apps, but it doesnot help.
Please help me to solve this.

Call AT&T - it seems they are forcing their own settings on you.

Enable LTE doesnt Exist

Hi i need help . . I bought an iphone5 Verizon from states. actually i live here in phillippines. and my problem is when i go to General > Cellular > there are two option which is: cellular data and the other one is enable 3G, my problem is the
"Enable LTE" bar does not exist.
kindly Help me please

There are no supported carriers with LTE for the iPhone in the Philippines at this time.
http://support.apple.com/kb/ht1937

Where is enable lte switch in my iphone5?

Insert a nano-sim in iphone5,wcdma call is ok,however there is no enable lte switch found in setting. My question is why? Is Enable lte switch sim card dependent?or PLMN dependent?thanks in advance

@Pan.yangpan , what do you mean by "hplmn is in the carrier list of apple memtioned"?
i still cannot get it in setting-general-cellular althogh LTE is enabled in my nano sim card!!

HT4623 enable LTE is missing

Just got new iphone 5. I notices I cant see "Enable LTE" option in settings. Instead I see 3G option. Any idea whats the problem ?

The ability to enable or disable LTE would be dependent on your carrier. A lot of the information in the Settings area are determined by the carrier file that is loaded on the phone. Who is your carrier and do they have a LTE network?

On iPhone 5c iOS 8.2, I go to settings, cellular, use cellular data for: Under "use cell data for are my apps but they are greyed out how can I ungrey them??

iOS 8.2 on iPhone 5c, goto settings, cellular, use cellular data for: all my apps under "use cellular data for" are greyed out. I've restart and hard reset. Looked thru all settings. Can someone help??

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

What is the best way to use a cellular enabled iPad in France?

What is the best way to use a cellular enabled iPad in France?

Frankly, I expect a bit more courtesy and details from someone wanting help from fellow users.
Don't use your AT&T SIM/plan out of the country for the iPad.
Just purchase a SIM in France for about 15 euros and use that.
-> http://www.tripadvisor.com/ShowTopic-g187070-i12-k4781004-o30-Prepaid_French_3G_ micro_SIM_for_iPad_it_s_not_a_problem-France.html

Settings for enabling message security tab in message display tool

Hi Experts,
We have a scenario where we are sending data by applying web service security using SOAP receiver communication channel .
I want to check message security log along with audit log in message display tool in RWB.
Can anybody know what are the required settings to enable message security tab in message display toolin RWB?
Regards,
Sari

Hello
Check the link, [Security Configuration at Message Level |http://help.sap.com/saphelp_nwpi71/helpdata/EN/ea/c91141e109ef6fe10000000a1550b0/content.htm], which describes the steps required.
Regards
Mark

How to configure MDT tool kit files and UDI settings to enable lite touch installation

please assist me for lite touch installation. i have integrated MDT 2013 with SCCM 2012 R2 then not sure what next? like how to configure MDT tool kit files and UDI settings to enable lite touch installation

Here are some examples:
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
http://damonjohns.com/2013/08/20/integrating-udi-into-your-sccm-osd-task-sequences/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Message: Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies.

Hello! I have two questions.
(1) I want to submit a question through www.tune-up.com but the website does not accept my inquiry.
I get the following message: "Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies and access this site again."
I checked my cookie settings, and it looks like I have the Firefox default settings (i.e. cookies are accepted). Tried to submit my inquiry again but it does not work. Please advise how to make sure I can submit inquiries etc.
(2) I want to start using the Google search again but not sure how do change the settings. I do not want to have DuckDuck Go as my default. Would you please describe how to change back to Google? Also, is the problem I described above perhaps related to the DuckDuckGo search engine I use?
I look forward to your assistance which is greatly appreciated - Thank you!

On #1, you can check the site-specific cookie setting using the Permissions panel of the Page Info dialog. When you are on the page, you can open that dialog using either:
* right-click the page > View Page Info > Permissions
* click the padlock or globe icon in the address bar > More Information > Permissions
Skim or scroll down to "Set Cookies" to make sure it is not set to Block.
If that is okay, some other random thoughts:
* Are you using the site in a private browsing window?
* Do you recall disabling DOM storage, which sites sometimes use instead of cookies to store large blobs of data (Firefox controls access to DOM storage using your cookie setting for the site)?
On #2, your default search engine should not have changed. To change it to Google, you can use the icon on the left end of the search bar (the classic small search box that appears on the toolbar). Please see: [[Search bar - add, change and manage search engines on Firefox]].
I don't think there is any connection between #2 and #1.

If I purchase an cellular enabled iPad do I need to purchase a cellular contract immediately?

If I purchase a cellular enabled iPad do I need to purchase a cellular contract immediately?

You purchase your device with a contract inmediately, but you can use it without a card and use Cellular whenever you need

Is there an option that in MIR7 or in your user settings to enable thatMIR7

Hi Team,
can any body please help in this below issue ??
Is there an option that in MIR7 or in your user settings to enable that MIR7 will always default to normal invoice entry (not to credit invoice). After an credit invoice is posted it will default to credit invoice next time you open MIR7.
Thanks
sesh

Hi,
i believe that is the standard behaviour.
There is no other option but to choose the the desired RM08M-VORGANG (transaction/event) value:
1 Invoice
2 Credit memo
...etc
Anyway, you could try something with badi MRM_HEADER_DEFAULT.
Best regards.
Edited by: Pablo Casamayor on Nov 11, 2009 8:15 AM

Settings | Cellular | Enabled LTE

Similar Messages

Maybe you are looking for