Settings changing when adding to another movie

Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
Message was edited by: jimfromdenver

Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

Similar Messages

Zoom settings change when adding pages

Hi
When adding a page to a document with this code:
app.activeDocument.pages.add(LocationOptions.AT_END);
InDesign automatically reverts the zoom setting to FIT_TO_PAGE
Is there a way to prevent this from happening?
I would like that it should stay at whatever it was.
Help will be much appreciated!
Thanks,
Davey

Davey_Doo wrote:
1) is there a difference between what I wrote "layoutWindows[0]" and what you wrote "windows[0]"?
Yup, "layoutWindows" refer to just the layout windows -- the ones one is normally working in. The other kind is "storyWindows", which is what you get when you open a text in the "Story Editor". There are vast differences between the two, such as "zoom" (you cannot zoom in on the story editor window).
Using "windows", without specifying the kind, you get a list containing both types; and using "windows[0]", you get the very first one, whether it is a story window or a layout window. Then, if it happens to be a story window, csm_phil's script will Crash & Burn because you cannot zoom in on a story window.
Your version will work correctly, and just in case you might have a story editor window open, it's best to stick to "layoutWindows" if you want to change a layout window property.
2) Although this does help, is there a way to prevent it from happening?
The reason I ask is because in a script which adds many pages, (e.g., MultiPageImporter script), the script needs to do this after adding each page.
No, you cannot prevent it in any way. It's just ID's default built-in behavior (although it seems strange that this only happens when using a script!).
But I disagree with your assessment it needs to be done "after adding each page". ID does not store the zoom percentage for each separate page and so it is enough to read the current zoom, add as much pages as you like, then set the zoom.

Level change when adding audio keyframes

Hi all,
I've been in Avid Land for the last few months and just came back and noticed something that was getting on my nerves when I left (I don't recall seeing this before FCP 6). When I add keyframes to my audio levels with the pen tool, I get a keyframe, but at the same time, it lowers my level as if I had added a keyframe and then dragged it down. As far as I can tell it does this every time.
Does anyone know what this is about?
Thanks,
Matt

I was having this problem, so just before I composed this reply I did some tests. It could well be 'sloppy mouse work' but I don't think so. This time the audio level went up by 1 db but before it was dropping by 1 db when adding a keyframe. During the test, no matter how accurate I was the audio level changed when adding a keyframe. The track I was working on was enlarge somewhat and the problem didn't happen on standard sized tracks. I feel that this has to be some sort of bug.
I have always found FCP a little bit on the 'accurate' side. You have to be very precise when clicking on items otherwise you will miss. Some buttons are way too small and I think Apple could improve the FCP workflow by enlarging some buttons and allowing more space around clickable items.
A good example of this is the 3 way colour corrector. The left and right buttons for blacks/mids/whites are very hard to hit and I quite often hit the maximum by mistake.
I have worked on many non-linear systems and FCP is the only one where mouse accuracy is so important.
I am, to some extent used to this now and I suppose it is a minor inconvenience in comparison to the benefits of using FCP but, in the interests of improvement and ease of use it would be good if Apple could take this onboard.
Weenie.

Sequence Settings message when adding LT clip

I was one who took the plunge with QT 7.4.5.
I'm running FCP 6.0 on OS 10.5.2
I found upon importing a rendered Livetype clip that when adding to timeline it shows this message:
<Warning This clip does not match this sequence's settings or any of your sequence presets
For best performance your sequence and External Video should be set to the format of the clips you are editing.
Change sequence settings to match the clip settings.?>
If I say no, it needs to be rendered. If I say yes it adds to the timeline without needing rendering.
BUT...THen any other previous clips added from the project force the above message.
I am wondering what in my preferences are being affected and what is a good workaround?
Perhaps just adding and re-rendering in FCP?
Thanks!

Duh..I was looking in preferences, and now I vaguely remember this menu.
Thanks ThrillCat!!

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Screen color settings changes when certain software is launched.

Since today I noticed the screen color settings of my Macbook Pro 17" (beginning 2011 model — Running OSX 10.8.4) is changing when certain software is launched. In this case, Indesign CS6.0 gives a strange blue hue over my screen, but when I check my screen color settings, nothing has changed, everything is set the same as when I don't run the softwares that change my screen color settings. I don't recall changing any settings that could have triggered this action. I didn't change any settings in Indesign CS6.0. I do regularly use CleanMyMac 2 to clean out my computer, maybe this has changed some settings? How can I change this back to normal? Google didn't help me neither.

Ah right, don;t use laptops much and always forget about that one, good catch. Switching graphics cards would definitely have an effect.
Just remember with that unchecked you will decrease battery run time so you might want to switch it back on when you are not doing graphics and you are on battery.
regards

My settings change when I change sim card?

Hi,
I am going to go to Croatia for a holiday. I would like to buy there some prepaid sim-card. Does Blackberry's settings will change or it would be all the same when I will change simicard?
Solved!
Go to Solution.

Hi and Welcome to the Community!
Nothing should change when you do this. With legacy BB devices, there could be some changes...but with BB10, nothing should change.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Printer Settings change when switching between printers

First time in the forum, so please be gentle. I know little about Adobe.
I am working with Windows XP (SP 2) machines (I know - should be at least on Windows 7, but can't change what my company has) and have Adobe Reader 8.1.2. We have run into a "bug" of sorts.
Many of our locations (these are PCs all off-site) print labels (pdfs) with a Zebra brand printer where the labels are 2.25 by 4.00 inches. The Zebra printers are always attached directly to the PCs where they create these labels. Sometimes, they want to send the labels to a Lexmark printer that is attached at a Primary Server elsewhere. When they do that, they make sure to choose "Fit To Printable Area" under Page Scaling when the Print Box comes up so that the 2.25x4.00 label is enlarged to fit on 8.5x11 inch paper. The problem we run into is that right now, the default settings for these Zebra printers is 2x3 inches and Portrait. We need them to be 2.25x4 and Landscape. The user makes those settings changes and saves them and it used to be those settings hold once they save them. We also have to change our Lexmark settings to "Letter - 8.5x11", otherwise it defaults to "Custom-4.88x21". Recently, there's been this bug where if they save the settings for Zebra, print something, it's fine. They switch to Lexmark, print to it with "Fit to Printable Area" it's also fine. When they go back to the Zebra printer, suddenly the saved settings are gone and it's back to default.
This also is happening in the reverse - if the user usually uses the Lexmark, but switches once to the Zebra, then back to the Lexmark, the settings have defaulted again. Someone here said they remember seeing something like this before in regards to Adobe Reader. Does anyone have any ideas?
PS - I am creating a new image which will have the correct default settings for our needs so that hopefully this will not be an issue in the future.

Hi BigRedEO,
Thank you for posting on the forums. This seems more like a printer issue as it is not retaining the settings.
Kindly try updating the drivers for the printer and check.
Thanks,
Vikrantt Singh

I lost my movies....they told me I had to change my security code when I bought another movies. now I lost all the other ones. And I cna't understand the instruction. They are wayyyy over my head.

oops...I wrote it all in above. here it is again. I bought a movie. then they told me I had to change my security code because they said it hadn't been used in long while. so I did and now I can't find my movies from the other file. Same name. new code. Whaaa..It says there are instructions somewhere but they are so far above my head I am in tears. I don't understand a word of it.. There must be an easy way to just bring them over to new setup. I am your grandmother so be nice.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Background changes when adding another Desktop.

Hi,
I have a background picture(a) on Desktop 1, I click Mission Control and add Desktop 2. Now the Desktop 2 has a background picture(b). So why is this happening? the new desktop should have the same background picture as the previews Desktop.
Mac(10.7.5)

in OS X, this is a "feature" as it's set up to display the selected image when your external display is hooked up & then wen your laptop is by itself.
so... set your wallpaper with the external display hooked on both screens, & then set it without the extra display. it should then remember both.

How to make signature field work for reader users? Security settings change when doc is extended???

I've been struggling to correct a problem all week and am at my wits end. Customer service was no help as the person I spoke with could barely speak english let alone understand the problem as I explained it to him. Hoping someone here can provide some insight, here's the issue:
I'm using a Windows 7 Professional OS. I created a Microsoft Word doc and used Adobe Acrobat XI Standard to create a form from it. It automatically detected the fields, which includes a signature field. I went through fixed it all up how it needed to be and did "save as other - reader extended pdf - enable forms fill in & save in reader".
The document is a report that will be sent to a small number of people that have to fill it out, digitally sign and return and I'm assuming that most if not all of them will open the document using the free Adobe Reader. So I thought extending it is what I needed to do to make sure they could fill it out, save it to their computer if need be, and also sign digitally. The signature field was automatically added in by acrobat for me and I did not change the properties of it at all except to add a border.
When I open the form in Reader (also XI) I can fill out all the fields, save it... but not sign it. The security settings say signing is not allowed even though I went back to the original pdf form and the security settings on it say allowed for everything. I don't know how to fix this... please help!!!
I've attached some screen shots but can include more if needed...

I don't have the Enable More Tools option under Reader Extended PDF. I just tried to download the XI Pro trial version and it won't complete installation because of the standard version I already have. Any advice or workarounds you know of? Going to the boss for $$ to upgrade to Pro is what I'll consider my last resort if the issue is truly that I have to use Pro to enable more tools for reader.... I appreciate your reply though. I sat here all day yesterday fingers crossed that SOMEONE would give it a go!

Sort order changes when adding a phonetic last name?

I have my contacts sorted and displayed by first name. If I add a phonetic last name to a contact, it changes the order of that person to the top of list. Why wouldn't it leave them in the first name alphabetic order?

Ok this is what I'm doing...
My last name is spelled with "liter."
Siri pronounces that like "a 2 liter of soda."
So I've added the phonetic last name field on the contact card to help her pronounce it like "lighter."
On my contact info,
First name: Bill
Last name: Hinderliter
Phonetic last name: Hinderlighter
If I delete the phonetic last name field... It sorts the contact perfectly.
If I add it, the contact is placed on top of all the "B's" in the list.
On a side note... I found another website with a temporary fix to this problem. The person there says to use the nickname field instead of phonetic field when getting Siri to pronounce things.
http://apple.stackexchange.com/questions/29210/how-do-i-get-siri-to-pronounce-my -name-correctly
Thanks again for your time.

Microphone settings change when switching between a

Hi all,?After much fun trying to get my mic working with my Xfi Elite Pro i am now having problems with the sound properties changing the settings when i switch between ap
ps.
If i sit with the audio properties open and set the mic to the line in 2/mic port it works, then if i fire up skype, msn, guild wars, bf2 or any other app in which i want to use the mic the setting switches back to the "microphone", i then have to minimise the app and force the setting back again.How can i get this setting to be permanently set to line in 2/mic?HELP!!

Some applications will do this, check out this thread for a little tool that might be of some use to you:
http://forums.creative.com/creativel...ssage.id=44236
Cat

Swatches saved to library changing when used in another file. Any idea why?

Hello,
I have saved a couple of swatches by applying the colors to squares, then saving them to the library and afterwards loading them in another file. One of the squares changes color when imported onto stage. In the library preview it looks ok.
Any idea why and how to solve this?
Marko

Hi Parth,
I saw the option in the maintenance screen of the datasource "Delivery of Duplicate Data Recs"; it was set to Undefined but following your guide, I changed it to "Allowed" and activated the datasource.
Remember the problem was not with the datasource, I was able to execute the infopackage to get the data in the PSA. It is when I try to take it from the PSA to the DSO with the DTP that is where I get the error.
Does't is mean that everything is ok with the datasource?
Any way, after changing to "Allowed", I deleted the load in the PSA and reloaded.
The data now looks good in PSA as before.
Now, a load to the DSO, by executing the DTP gives same error message.
Any more hints?

Settings changing when adding to another movie

Similar Messages

Maybe you are looking for