Settings for Airport

Can not get contact from Apple-TV
Can anyone give settings for iMac24-Airport

Welcome to the  Discussion Forums
Please tell us a little more about all your network equipment (modem/router etc)

Similar Messages

TCP/IP settings for airport card

ok, first off...please take it easy on me...i'm a windows guy but am close to purchasing a mac for my girlfriend and also have an iPhone so please understand that i love macs, just don't know too much about them..yet
i have a need to set TCP/IP settings for an airport card when the mac connects to a specific SSID (Peanut Gang). the problem is due to the fact that when macs connect to a linksys WRE54G wireless repeater, they do not obtain the TCP/IP info. you can go into system prefs -> network and renew the lease and it obtains the info but i've been asked to "automate" this process.
ok, i'm not sure if it's possible but when i saw the "automator" section here i thought i would ask. i know how i could do it through scripting on a windows machine but i digress, ha!
thanks

You may want to ask this over in the "Networking" group.
Also clarify whether you're having these issues with a mac you have, or just what.
Might want to specify what kind of mac is having this problem, too.
And be ready to explain just what you're asking when you say:"need to set TCP/IP settings for an airport card when the mac connects to a specific SSID"
There are some pretty good blokes in that discussion group.
welcome

Optimum settings for airport extreme base

I have a relatively new Airport extreme base station that I got this year. And, two new 15" Macbook pro's.
There are lots of options in the set up of the airport. Had anyone determined what some optimum settings might be to maximize speed.
I do know one hint.... use iStumbler to find an inactive channel and set that up as the channel that you use.
Any other tips?

Welcome to the discussions!
iStumbler will not work with Snow Leopard, so try Air Radar. It's not free, but you can use if for a few weeks at no charge. You want to set your channel as far away as possible from any other channels that you see. The "Automatic" setting on your AEBS is supposed to do this for you, but it's a changing target as the other routers in the neighborhood will be doing the same thing. The "right" channel on Tuesday may not be the right channel on Friday if you try to set the channel manually. It will take some experimentation.
http://www.koingosw.com/products/airradar.php
The optimum settings to maximize speed may curiously not be the best settings to use on your network if a sacrifice must be made to give up bandwidth. In this regard, there is no way to predict in advance whether the highly advertised 5 GHz will perform better than the more standard 802.11n at 2.4 GHz.
The reason for this (and what the ads don't tell you) is that higher frequency 5 GHz signals are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, in return for speed, you give up penetration power. For many users 5 Ghz does not perform nearly as well as 2.4 GHz a few rooms down the hall or on the upper floor.
You will need to experiment to find the best compromise in settings for your own installation.

Best settings for Airport extreme

I have grande internet service - fiber optic to the house. What are the best settings for my AEBS? When I connect directly - bypassing the AEBS - I get much much faster internet service. What are the best settings? Thanks

I've read that the APE can deliver up to 600 Mbps from its WAN port to a LAN port, so unless your access is really fast it should do.
Does this speed problem only occur when you connect wirelessly?

Settings for Airport Utility / Airport Express

I have an Airport Express. The idea behind it is, I want to be able to take it to any hotel or location that ONLY has wired internet, and create a WiFi hotspot for my iPad.
Right now I have it set up working on my home network, but I want to make sure the settings are correct so that I could...say...take it to the Ramada Inn that only (in this example) has wired ethernet internet and plug it in, and turn the connection into a WiFi network.
What settings do I need to put in specifically for that purpose?
I'm going to Germany and I want to make sure it works before I leave.

Impossible to say for certain. The same settings used with your existing internet service provider and modem may work, or different settings may be required. An Airport Express can save 5 different wi-fi network settings which can be named for each network.
I don't travel anymore, but when I did I took my Apple PowerBook at the time with me along with my Airport Express to create a new wireless network with my AE if needed for a hotel's modem available in my room. This can't be done with an iPad.

DNS settings for Airport Extreme Base Station

This month's MacWorld suggests that changing the DNS setting of the wireless device might increase the speed of the connection. What setting should my Airport Extreme Base Station use.
The Computer system says 10.0.1.1 and it works. When I entered the numbers they suggested I get no connection.
Any suggestions?

To change DNS setup on the Airport you need to put in the DNS change on the Internet tab. The Airport will always place itself as the main DNS server to the network clients that connect by DHCP, unless you set the Airport to static IP.. and it will use your ISP DNS server by default.. you can change them if you want. Just type in the new DNS you want to use.
This month's MacWorld suggests that changing the DNS setting of the wireless device might increase the speed of the connection.
http://www.macworld.com/article/2824564/slow-internet-edit-your-dns-settings.htm l
In most cases this is really so minimal as to be insignificant. The airport should cache the regularly used DNS addresses and you can test it by ping to your local DNS or the DNS recommended by MacWorld??.. but honestly a few ms is not going to change the world. To the clients the local network addressing should be still using the Airport as the main DNS.. you can setup manually in each device a different DNS but that can give local network issues as it then has to find local clients by broadcast.
I have a complex dns setup for other reasons.. getting past geolocks..
If I ping my local ISP dns I get
ping 202.76.170.228
PING 202.76.170.228 (202.76.170.228): 56 data bytes
64 bytes from 202.76.170.228: icmp_seq=0 ttl=61 time=25.422 ms
64 bytes from 202.76.170.228: icmp_seq=1 ttl=61 time=25.984 ms
64 bytes from 202.76.170.228: icmp_seq=2 ttl=61 time=25.504 ms
64 bytes from 202.76.170.228: icmp_seq=3 ttl=61 time=24.933 ms
64 bytes from 202.76.170.228: icmp_seq=4 ttl=61 time=25.297 ms
64 bytes from 202.76.170.228: icmp_seq=5 ttl=61 time=25.258 ms
64 bytes from 202.76.170.228: icmp_seq=6 ttl=61 time=24.915 ms
If I ping google DNS. 8.8.8.8
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=57 time=37.985 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=57 time=37.562 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=57 time=37.715 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=57 time=37.639 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=57 time=36.845 ms
If I ping the US DNS server.
ping 208.122.23.22
PING 208.122.23.22 (208.122.23.22): 56 data bytes
64 bytes from 208.122.23.22: icmp_seq=0 ttl=51 time=187.209 ms
64 bytes from 208.122.23.22: icmp_seq=1 ttl=51 time=187.398 ms
64 bytes from 208.122.23.22: icmp_seq=2 ttl=51 time=186.681 ms
64 bytes from 208.122.23.22: icmp_seq=3 ttl=51 time=187.030 ms
64 bytes from 208.122.23.22: icmp_seq=4 ttl=51 time=186.731 ms
64 bytes from 208.122.23.22: icmp_seq=5 ttl=51 time=186.967 ms
It is very obvious the best ping is the ISP dns because the route path is shorter..
Google is very good but still takes longer and of course dns in another country is much worse.

Microcell Settings for Airport Extreme

What settings on my airport extreme should I use so my ATT microcell works consistently?

marciafromboston nailed it.
There are no settings or adjustments to be made on the AirPort Extreme. Plug in the ATT microcell to an LAN <-> on the AirPort Extreme.
If you are having difficulties, temporarily connect a laptop to a LAN <-> port on the AirPort and turn off the wireless on the laptop. Check to make sure that you can log in to the Internet.
If your laptop connection is good...and the microcell is having issues....you have a microcell issue. I went through 3 trying to find one that might work, but no luck, so I gave up trying. AT&T finally admitted to having a "few" problems with the devices.
Hopefully, you will have better results.

What are the settings for airport disk

I am confused about the TC settings. It seems that there is a TC name and password, but how do I access any disks attached to TC and how do I assign the disk to different users. Whats the best way to set it up, using "Access DIsk"? And the "by Account" (what does that mean), by disk password?

do your connected disks show up in the same place as they would if you plugged them in directly?
I can only access mine through the Shared Devices dropdown menu under my time Capsule. They don't "mount" like they normally do.

Best Airport Basestation settings for iPhone speed

Hi all, I thought I'd start a thread to capture the best settings for the Airport Basestations to get max speed for iPhone when using Wifi.
I've found there is a big difference in network speed between a Mac and the iPhone even when on the same WiFi network. Try any of these tests on your iPhone and your Mac:
http://i.dslr.net/tinyspeedtest.html
http://iphonespeedtest.com/
http://testmyiphone.com/
Background from this article:
http://www.iphonefreak.com/2008/07/dsl-reports-offers-iphone-friendly-speed-test .html
Here's my experience to date (all subjective, no measurements yet).
- WPA2 and any form of network encryption slows down the transfer speed to the iPhone
- I'm currently using no encryption but MAC address filtering on the Airport BS
- Basestation in bridge mode
Please post your results

Answered my own question:
The answer is set your Wifi to B only and all the speed problems with the iPhone 3G will be fixed! There seems to be a problem with the 802.11G on the iPhone in my experience.

ITunes Settings for Media on External Drive via Airport Extreme...

iTunes Settings for Media on External Drive via Airport Extreme base station versus plugging directly into laptop.
My current configuration is that my iTunes Media (700gb) are all stored in an External Drive that's plugged into my Airport Extreme Base Station. This works great for me having wireless access to my iTunes external drive.
Whenever I need to back up that hard drive with Time Machine, I just plug it directly to my laptop...
But how do I let iTunes (or iTunes library) know that this is the same hard drive where all my media is stored when it's plugged directly into the laptop as opposed to trying to access it from my Airport Extreme network?

No there isnt any files call library in the folder i created I am now in the process of copying them back but I guess I will loose all my playlists and playcounts. I do have a Copy of my drive that i made with carbon copy cloner. So maybe it will be best to boot from there, restore and start again.
Chris it was just the media folder. I was following the instructions on the apple support page. Got to point 14 didn't get the warning but did seen to have a brand new itunes, so emptied the trash as they said expecting everything to be fine but it wasnt.

Where are the settings for the internal Airport Extreme Card?

Here is my problem.
I have a Xbox Slim. It was connected wirelessly to my old Mac computer which had a external Airport Extreme b/g. Connection worked perfectly and had no issues.
I bought a new computer a iMac with OS X 10.6.7. It comes with a built in Airport Extreme Card that has wireless connection for b/g/n.
I set up my wireless connection on my new computer. We have two iphones and they both connect to the new wireless network with no problems.
When I go to connect my xbox slim it asks me for WEP, which I enter, but when I go to test connection I get a error message. The connection fails between the xbox and my network. Says unable to connect and then gives me a bunch of troubleshooting messages which none seem to work.
Under the IP Settings is says Automatic and has a IP address listed and a Subnet Listed. The Gateway is all zeros.
When I go into the Airport settings the DHCP is turned on.
Now I know my next option is enter the numbers manually which I have tried several times. I don't really know if I'm getting the right numbers or not because its a new iMac and everywhere I search people are getting the IP addresses, router numbers, etc. from PC's or from external routers. I need to get mine from the internal Airport Extreme Card.
I have also read posts for setting your options for Mac Filtering. But I don't know where to adjust these. I don't see any options for configuration for a internal Airport Card.
Where do I adjust the settings for Mac Filtering, Signal Strength, b/g/n, etc?
I know my Xbox's connection is fine because I plug in my old Airport Extreme and it connects just fine. But I don't want to use my old wireless router. I would like to just use the connection that is built into my iMac because it has the 'n' network. Is that even possible?
Any help would be greatly appreciated. Thanks in advance.

ImperialStout wrote:
I don't see any options for configuration for a internal Airport Card.
there aren't any.
check out [this|http://discussions.info.apple.com/message.jspa?messageID=3797169] discussion. it is rather old but the facts remain unchanged.
you might want to have another look @ your airport extreme or get a newer, [refurbished_|http://store.apple.com/us/browse/home/specialdeals/mac/macaccessories?mco=MjEwNzM3NjE] extreme (there currently aren't any) or time capsule. these base station are *simultaneous dual-band* capable, meaning they broadcast on both the 2.4 and 5 GHz bands @ the same time.

Is there a fix for Airport No Connect Bug post 10.5.8 for 2009 Macbooks???

My Airport stopped working after 10.5.8 update.
It won't connect to my wifi even though it can see it,
kept getting self assigned IP.
The airport fix doesn't work with my machine, possibly because it's too new.
Normal ethernet works fine. I also tried internet sharing on my laptop, as that's how i get my iphone to use wifi at work, that doesn't work either.
Hardware details below.
macbook ver 5.1
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.0073.B06

After doing a Software Update, AirPort has been having serious connection issues. It cannot find wireless networks where the *Wireless SSID Broadcast is DISABLED*. My iPhone finds the networks perfectly, every time. I am forced to input the network manually every time through "Join Other Network...", even though the network is saved on the Advanced list in Network Preferences.
*Here are the specs of my MacBook Pro:*
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
*The router I am connecting to is...*
Linksys Compact Wireless-G Broadband Router
Model WRT54GC
Firmware Version: v1.05.7
Mode: Mixed
Wireless Channel: 06
Security: WPA2 Personal
Encryption: AES
Everything is pretty much defaulted to the default settings for the router. I have also another Linksys Router that is having the same problems. These used to work before perfectly BEFORE the MacBook 10.5.8 updates...
*Previous Methods in Trying to Resolve Issue:*
-Deleting AirPort connection in Network Preferences and re-adding it
-Deleting the "com.apple.airport.preferences.plist" file in /Library/Preferences/etc.
I'm at a loss here... any help would be greatly appreciated.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

TS2220 How do you reset the network password for Airport wireless?

How do you reset the network password for Airport wireless?

Use AirPort Utility...select the AirPort Express and in the menu select Base Station...Restore Default Settings...

Settings for Airport

Similar Messages

Maybe you are looking for