Settings for Analogue Gateway

I already have a VOIP Adaptor/Analogue Gateway from another VOIP Network. Can I get the settings required to use it with Skype?

Hi there,
Unfortunately, I don't have an answer for you but was hopeful you could help me. I just got the new iMac 20" and a new 2wire 2700hg-b... I managed to get airport to connect by entering the ssid and network key... network icon (upper right corner) shows full signal yet whenever I try opening a web page I get the message "you're not connected to the internet" I tried resetting the network with $ sign before the network key (read about this tip online)... same problem...
Please tell me how you managed to to use it... no WEP?

Similar Messages

IBook loses Airport settings for 2Wire Gateway whenever put to sleep

My old 2Wire DSL modem/gateway stopped doing wireless, so I had to replace it with a new one through SBC/AT&T. It's a 2700HG-B. Connecting to it with my G4 PowerBook (running OS X 10.4.7) works just as with the old one.
However, with my G3 iBook, every time it is reawakened from sleep, the Airport Utility no longer connects to the DSL wirelessly — even after I re-select my 2Wire.
I have to re-run the Airport Assistant and re-configure it, including entering the WEP Key before I can use the WiFi. This is true everytime the iBook has been put to sleep. Previously, the iBook automatically reconnected whenever it was reawakened.
The iBook has no similar problem connecting to other WiFi bases — but that's no help at home, where it's used most.
I will appreciate any help anyone can provide.
Dante
PowerBook G4, iBook G3, PowerPC G3/4 Mac OS X (10.4.7)

Hi there,
Unfortunately, I don't have an answer for you but was hopeful you could help me. I just got the new iMac 20" and a new 2wire 2700hg-b... I managed to get airport to connect by entering the ssid and network key... network icon (upper right corner) shows full signal yet whenever I try opening a web page I get the message "you're not connected to the internet" I tried resetting the network with $ sign before the network key (read about this tip online)... same problem...
Please tell me how you managed to to use it... no WEP?

ALE Settings For File-IDOC Scenario

Hi All,
While Doing IDOC-File Scenario we have to do the Following Settings
In XI
1) Create RFC Destination towards R/3
2) Create Port
3) Load Meta data
In R/3
1) Create RFC Destination towards XI
2) Create Port
3) Create PF
Q1) Coming to File-IDOC Scenario do we need to do the Same Settings ????
Q2) In this File-IDCO Scenario do we need to create RFC Destination in R/3 towards XI ????
Clarify me these Confusions
Regards
Bopanna

HI,
for IDOC TO FILE
We need to create the rfc destination at XI side so as to send the acknowledgement to sap r/3 as soon as idoc has been received.This is the reason WHY WE NEED RFC DESTINATION AT XI SIDE
There are are only 2 major difference in Ale settings for FILE TO IDOC AND IDOC-FILE
i.e for FILE-IDOC
1) No need to Distribute the modal view
2) For partner profile Specify the INBOUND PARAMETERS
FOR STEP BY STEP U CAN SEE THE SETTINGS GIVEN BELOW
We need to do the following settings in XI
1)   Create an RFC Destination to the Receiving System in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a)   Select Create New button
b)   Enter the port name as SAP+SID (The starting char should be SAP)
c)   Enter the destination client
d)   Enter the RFC Destination created in XI towards R/3
e)   Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
                    SETTINGS IN SAP R/3
     We need to do the following settings in R/3
     Logon to Sap R/3 System
1)   Create an RFC Destination to XI in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h)   Test the connection and remote logon.Both must be succesful
2)   Create communication Port for Idoc processing Using Transaction(We21)
a)   First Select Transactional RFC and then click create button
b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
d)   Enter the RFC Destination created in SAP R/3 towards other system.
e)   Save
3)   Create Partner Profile with Inbound Parameters (WE20)
a)   Create New
b)   Create the Partner no. name as same the logical system name of the destination system
c)   Select Partner type LS
d)   Enter details for Type: US/USER, Agent, and Lang
     Then Save
e)   Select Partner no. and LS which were create above
f)   Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter
g)   Select Message type
h)   Double click on Message Type and Then Enter the details for Message Type and Process Code.
I)   save
4)   In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
     and then assign logical systems
b)   Double click on Define the logical systems
c)   Give data for your Logicaal System and Name
d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e)   Assign the logical system name to the client
ALSO WE NEED TO CONFIGURE THE IDOC ADAPTER AS RECEIVER TO CONVERT THE IDOC-XML TO IDOC
PLZ REFER THE LINK BELOW.
PLZ REWARDS THE POINTS
VIKAS JAIN
                                                                                [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098]
Edited by: vikas jain on Jan 22, 2008 11:49 AM

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

HTML5 MP4 Codec Settings for Safari 5.1.5

Hello all,
I am having a problem with HTML4 MP4 h.264 videos in Safari 5.1.5 only running under Lion. Does anyone have any exactly specifications for compressing videos that will play in this version of Safari? Also, if you have sucessfully exported videos for 5.1.5 what software are you using to encode? I have tried several options (After Effects, QT7 etc) and not had any luck. Thank you!

Getting mp3 music out of your 4 satelite speakers and center channel requires either enabling the X-Fi CMSS 3D Sorround setting in your Audio Console or, alternately, if using your X-Fi card with an external Decoder, you could (if available on your decoder) enable Dolby PLII Music enhancement or X2 Stereo enhancement. I personally prefer the results from enabling CMSS 3D Surround and then adjusting my center channel for an even sound stage. Crystalizer Mode: In general, 24-bit Crystalizer produces crisper high frequencies, punchier mid-range percussion and note onsets, and stronger kick bass hits. I'm not sure that I would use the Crystalizer Mode as a substitute for good EQ settings but perhaps in conjuction would be the best approach. Depending on the 5. speaker system you have, Base Redirect shouldn't have to be used unless your satelite speakers and center channel are playing Bass frequencies that really should be assigned to the Sub-woofer. Some speaker sets and amplifiers have bass redirection feature i.e. you do not need discrete 5. signal to hear the sound on the subwoofer. Such sets always output bass - even if you connect a normal stereo source. Again, however, it is possible that if you have an analogue speaker set that does not support automatic Bass Redirection via the amplifier, then you would have to enable Bass Redirect at the sound card level in order to redirect the lowest frequencies to the subwoofer. I do not have to conduct a Bass Redirection, however, not all systems are equal in terms of functionality. The best settings for a 5. system are really contigent on the room size, speaker type and placement, room wall materials, amplifier type, content played (movies, music, spoken word., etc.) and, listeners personal preference. Personaly I would run the supplied Speaker Calibration utility and when you have the sound you personally enjoy, stick with it. Best advise I can offer to be perfectly honest. Hope this helped.

Help with Preference pane DNS settings for Mail

I have a mail (not Apple Mail) issue with my Entourage Mail. I keep getting
the following error message and I have verified the server settings in my
mail accounts are correct for ATT that uses pop.att.yahoo.com. I manage to
get mail most of the time but I still get the following error message:
Error Description
Error:
Entourage cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.
Explanation:
Could not retrieve mail
Error: -1370
My System Preferences/Network/Advanced/DNS point to my 2wire Gateway combo
modem/router. The router is set for Automatic DNS. I tried changing it to manual
and it did not works any better.
If I change the DNS setting in the preference pane in OS X, will it really use that
DMS address and bypass the router?
I played around with the namebench utility
http://www.macupdate.com/info.php/id/32784/namebench and each time you
run it, namebench makes a better recommendation - saying something is faster
than the previous recommendation.
I am lost on what I need to do correct the Network pane of my System Preferences.
Should it point to the router or to good DNS?
I do not think this is a Microsoft Entourage issue.
Have others seen this issue or is unique to my setup.

Going to sleep on and see how it works in the morning.
The problem is solved and I have checked the Yes button that my
question has been answered. The following is a copy of a posting
two days ago to the Microsoft Entourage group that should work
just as well for Mail users.
If you are tied of getting the following Entourage error
message -3170 over and over again, read on.
Error:
Entourage cannot find the server. Verify the server information
entered correctly in the Account Settings, and that your DNS
settings in the Network pane of System Preferences are correct.
Explanation:
Could not retrieve mail
Error –3170
Thanks to a tip from Diane Ross I have gone two days without
getting the error message.
First, I know the Account Settings for my ATT DSL service
have been correct for some time and have not changed.
The short version of the fix that worked for was to open
the OS X 10.6.3 (Snow Leopard) System Preferences/
Network/Advanced/DNS panel and add some better Domain
Name Servers from my location.
The default (or before) OS X setting was:
DNS Servers: Search Domains:
192.168.1.254 gateway.2wire.com
Note both were dimmed. The server listed tells OS X to use
the ATT provided combo 2wire modem/router for my DSL service.
The change that seem to have worked for me was to leave the
Search Domain the same; however, I added some good servers that
bypass the 2wire gateway with its automatic DNS setting.
DNS Servers: Search Domains:
208.67.220.220 gateway.2wire.com
208.67.220.222
65.68.49.51
192.168.1.254
I found the ‘good’ or better DNS Servers by making several runs
using the free Google utility called namebench 1.2
<http://www.macupdate.com/info.php/id/32784/namebench>
This utility takes some time and will make suggestions from your
location. If you add the namebench recommendation and run it
again it will find a better recommendation. I had to make several
runs to find the better DNS Servers for my location. The first or
primary is called OpenDNS, the second is a backup for the OpenDNS
and the third is SBC Global TX now owned by ATT and I live in
Texas. Note I ended with the default IP address.
FYI, I tied using the selected servers in the 2wire gateway in the
manual mode rather than the default automatic mode and it just
did not work right. Some pages would not open and others were
slow. For this reason I run the router in the automatic mode for
DNS and control things using the OS X Network preference pane.
The addition of preferred DNS Servers in my Preference seems
to have slowed down and hopefully stopped Entourage 2008
version 12.2.4 -3170 error messages.
Message was edited by: aRKay

Where are the settings for the internal Airport Extreme Card?

Here is my problem.
I have a Xbox Slim. It was connected wirelessly to my old Mac computer which had a external Airport Extreme b/g. Connection worked perfectly and had no issues.
I bought a new computer a iMac with OS X 10.6.7. It comes with a built in Airport Extreme Card that has wireless connection for b/g/n.
I set up my wireless connection on my new computer. We have two iphones and they both connect to the new wireless network with no problems.
When I go to connect my xbox slim it asks me for WEP, which I enter, but when I go to test connection I get a error message. The connection fails between the xbox and my network. Says unable to connect and then gives me a bunch of troubleshooting messages which none seem to work.
Under the IP Settings is says Automatic and has a IP address listed and a Subnet Listed. The Gateway is all zeros.
When I go into the Airport settings the DHCP is turned on.
Now I know my next option is enter the numbers manually which I have tried several times. I don't really know if I'm getting the right numbers or not because its a new iMac and everywhere I search people are getting the IP addresses, router numbers, etc. from PC's or from external routers. I need to get mine from the internal Airport Extreme Card.
I have also read posts for setting your options for Mac Filtering. But I don't know where to adjust these. I don't see any options for configuration for a internal Airport Card.
Where do I adjust the settings for Mac Filtering, Signal Strength, b/g/n, etc?
I know my Xbox's connection is fine because I plug in my old Airport Extreme and it connects just fine. But I don't want to use my old wireless router. I would like to just use the connection that is built into my iMac because it has the 'n' network. Is that even possible?
Any help would be greatly appreciated. Thanks in advance.

ImperialStout wrote:
I don't see any options for configuration for a internal Airport Card.
there aren't any.
check out [this|http://discussions.info.apple.com/message.jspa?messageID=3797169] discussion. it is rather old but the facts remain unchanged.
you might want to have another look @ your airport extreme or get a newer, [refurbished_|http://store.apple.com/us/browse/home/specialdeals/mac/macaccessories?mco=MjEwNzM3NjE] extreme (there currently aren't any) or time capsule. these base station are *simultaneous dual-band* capable, meaning they broadcast on both the 2.4 and 5 GHz bands @ the same time.

CUCM 9.1 Call Recording for analogue devices

Hi,
We are designing a CUCM 9.1 solution where Active Call Recording for analogue devices feature is required.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmfeat/CUCM_BK_CEF0C471_00_cucm-features-and-services-guide_chapter_0100110.html
According the feautre list support it seems that is supported by the old ata 186 but not by the ata 187.
Then, how could we achieve this on a new deployment? Has anyone had the chance to deal with this?
Many thanks in advance. Thank you very much,
Francesc

This is a weak spot in the native Cisco solution portfolio. I'll try to give one option but hopefully others will chime in with something more clever.
The MediaSense product can record trunk-side from Cisco CUBE which allows for device-agnostic recording; however, that only works if you're not concerned about internal calls to/from the analog phones (i.e. just to/from the PSTN). Getting the last part seems to require old fashioned SPAN recording to a capture server of a third party. This can get dicey though because most of the third-party recording vendors manually decipher the SCCP packets to figure out the calling/called party information. Be sure to ask them whether SCCP- or MGCP-controlled gateways are supported.
Please remember to rate helpful responses and identify helpful or correct answers.

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Adobe cloud to save automatically actions, stuff and settings for example?

Hi!
I had a hard-disk error and had to reinstall everything and with that I lost my photoshop actions...
Can't adobe cloud save automatically / sync this kind of stuff and personalize settings for example?
Thanks!
Francisco

Hi Francisco, here are the details around sync settings and items that can be synced as of now: Photoshop Help | Sync settings using Adobe Creative Cloud
Thanks,
Atul Saini

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

ITunes looses photo sync settings for Apple TV (1st gen.)

Since the update to the new Photo app on my Mac, iTunes forgets the photo sync settings for my Apple TV (1st. generation, 160 GB HDD).
Every time I open the photo section of the Apple TV sync settings, all the options are turned off. Then I mark a couple of albums and sync the Apple TV >> all album appear on the Apple TV.
But after closing and re-opening iTunes in the photo settings everything is unmarked again. So on every following sync the photos on the Apple TV are easily erased :-( Resync them to the Apple TV takes hours (>30'000 photos!).
All the other sync settings in iTunes remain intact.
Environment:
- MacBook Pro Retina 15" with the latest SW (Mac OS, iTunes, Photo App, etc.)
- Apple TV 1st gen 160 GB HDD

Restarting iTunes resolves the issue in the majority of cases, if it doesn't my second guess would be your security software.
What really seems strange here is that there have been no updates since well before Xmas, so after initially setting it up, the first update would have brought you right up to the most recent (and indeed the very last) .
Agh, how silly of me, I see it's iTunes you have updated.
If that's about all you've changed, you might want to try reinstalling iTunes and bonjour.
Message was edited by: Winston Churchill

Different rich text/plain text settings for different accounts?

I use Mail for both my work email (MS Exchange) and my personal email (webmail/IMAP). Many of my coworkers use Outlook's rich text formatting options, so I need to have my work emails go out as rich text. However I'd like to have my personal emails go out as plain text.
I can set Mail to create new messages in plain text, but to reply in the same format of the original message. That takes care of everything EXCEPT when I compose a new message using my work address... in that case it goes out as plain text, and my coworkers complain that they can't use formatting, because their copies of Outlook are in turn configured to reply in the same format as the original message.
So ideally what I'd like is to have two different formatting settings for my two different accounts. Anyone know how this might be done? Any plugins, etc., that might accomplish this?

Since you are running Jaguar, Jaguar and Panther Mail do not support composing in HTML and this includes when forwarding a message received that was composed in HTML.
Since Jaguar and Panther Mail do not support composing or forwarding HTML, you can't embed images or photos in the message body anyway.
RTF with Tiger Mail is really HTML and although Tiger Mail does not include an HTML composer/editor, you can copy/paste HTML format from a web page and forward HTML received.
Images/photos and single page PDF attachments are revealed as inline or viewed in place within the body of the message by default which cannot be turned off. This applies to received and sent messages which is not the same as being embedded. Embedded requires HTML and an embedded attachment is not a true attachment. All Mail.app versions render HTML received but you cannot attach a photo or image as embedded with Jaguar or Panther Mail so it doesn't matter if you use RTF or Plain Text in regards to photo/image or single page PDF attachments which appear as inline or viewed in place within the body of the message by default regardless.
When you use Plain Text for message composition, the receiving mail client renders the text in whatever font the reader chooses.
IMO, everyone should use Plain Text for message composition. Messages would be boring to some but the majority if not all problems experienced with email would be eliminated if HTML was banned from message composition.

TS2446 I just got my iPad, I have an iPod. When I go to put apps on it says my apple I'd Is disabled. I have reset the passwords. Somehow I have two id's? I've gone into settings for apps signed out and back in with the new p.w. I can't think of what e

I just got my iPad, I have an iPod. When I go to put apps on my new ipad it says my apple ID Is disabled. I have reset the passwords. Somehow I have two id's? I've gone into settings for apps signed out and back in with the new p.w. I can't think of what else to do to get the disabled block off. Any ideas?? Thanks

See this Apple document for help...
http://support.apple.com/kb/ts2446

When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

Read the User's Guide... it covers how to backup and sync the device as designed.

Settings for Analogue Gateway

Similar Messages

Maybe you are looking for