Settings for canon lide 210

how do i set my scanner for scaning jpg photographs as my scaner automaticlly is scaning everything as a pdf

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Similar Messages

Problems with using Canon LiDE 210 and OSX 10.7.4

I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff

Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

Hi lanepoor!
So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

Canon lide 210 not recognized in yosemite. Latest driver downloaded

Since upgrading from Mavericks to Yosemite (10.10.1) I have lost capability with my Canon Lide 210 scanner and Jam XT bluetooth wireless speaker.
I have downloaded and installed the latest Canon driver to no avail. Any ideas? Both were working great before I upgraded to Yosemite.

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Update Re: Using Canon LiDE 210 with OS X 1.6.8

Hello,
I've read some older threads regarding this discussion but they must be closed since I couldn't add a comment. So, I thought it would be best to open a new one. I apologize if I'm treading old ground.
Here's my setup: MacBook Pro (mid-2010), Mac OS X v10.6.8 Snow Leopard, Safari 5.1.2. I needed a basic scanner, did research and everything looked good, so I bought a Canon CanoScan LiDE 210 scanner. All I need is to be able to scan documents (minimal graphics) to the MacBook, preferably in PDF format. Not really interested in scanning photos etc.
I just want to be careful and would like some clarification, please. So regarding installation, I've gotten three "recommendations/methods":
1) With the purchased Scanner, included was installation CD with instructions.
2) Emailed Canon Support and was told to download the latest driver and the MP Navigator EX from their website instead.
3) Read and referenced Apple Support Article HT3669 , which has been updated recently - February 15th, 2012.
Now, step #3 is my preferred selection, since it comes from Apple Software Update and the article lists the LiDE 210 as supported.
I also noticed on the other thread (that I could not comment on), that PAHU commented:
I have the LiDE200 and it works fine with Image Capture and Preview. The driver was included with one of the Canon updates hosted via Apple and part of Software Update. Checking the [latest Canon update|http://support.apple.com/kb/HT3669#canon] hosted by Apple, the LiDE210 and LiDE700F are both included as supported scanners.
This sounds exactly what I want to do for installation and use (Image Capture and Preview).
So before mucking up anything, if possible, could someone please confirm the step #3 approach and the supporting comments. (PAHU ?! ).
The way it appears, step #3 seems like minimal hassle, straightforward, and the best way to go. Also, do I really need this "MP Navigator EX", if I have Image Capture and Preview? I would prefer to avoid as much third party SW as possible.
I apologize for the lengthy post and thanks in advance for the help!
DMerz

Nice to read that it is all working. In response to the questions;
DMerz wrote:
I would love to have Adobe Acrobat Pro but funds won't allow it. You mentioned TWAIN based (Adobe Acrobat Pro) and making PDF's. What is the difference in creating a scanned PDF file via Image Capture vs creating one with Adobe Acrobat Pro? Or another way to ask is, what does the TWAIN driver do that the ICA doesn't? I googled TWAIN but got lost pretty quick. Sorry if that is a dumb question...
A PDF created by Image Capture is not a text searchable PDF. It is basically an image file (it is usually a TIFF with a Postscript header). So if you wanted to locate some line of text on the page, you would not have the ability to do so. In contrast, a PDF created in Acrobat will be text searchable, as the software will do character recognition (aka OCR). So if you wanted the means to locate content within each document, then you should OCR the scanned document. An Acrobat Pro will do this on the fly as you scan the document. Using Image Capture, you would have to scan the document first and then use some OCR package to convert the scanned image.
For the record, MP Navigator has an OCR function, but it is not as accurate as Acrobat Pro's version.
DMerz wrote:
One last question (I think - ). I'm still running Snow Leopard OS X v10.6.8. but probably will go to Lion soon. It looks like the Apple Support Doc says that the ICA driver I got through SW update will work with Lion OS X v10.7, so will the driver "disappear" when I do the Lion upgrade, causing me to have to setup the scanner again?
The driver won't disappear if you upgrade. The ICA driver package available from Apple is for 10.6 and 10.7. But it is sometimes advisable to remove the printers and scanner in 10.6 before you upgrade, or at least ensure you have the latest versions available before the 10.7 update. Given that you have just done this installation then you have the latest drivers so there should be no issue with the scanner after the Lion update.

No driver for Canon Lide 80 scanner?

I recently bought a Mac Mini with Lion installed to replace my old Windows PC and upgraded my late 2009 Imac to Lion to be able to use iCloud between my UK base and my second home in France. Everything went well until I realised that neither my Canon Lide 80 scanner or my Canoscan 4400F wwould work with Lion. I am waiting for a responsse from Canon but, meanwhile, any ideas for a workaround? My trusty old HP 920C printer is recognised as a generic printer and works fine but, it seems, there are no generic scanner drivers.

Thank you John. Vuescan worked for my Canoscan 4400F but, in fact, led me back to Canon support where the driver and toolbox, formerly unavailable, had been updated to my scanner. A very satisfying solution.
Motard

Canon LiDE 210 insufficient memory with Lion

My LiDE 210 scanner which has worked in the past using OSX10.7 but it now says "insufficient memory" each time I launch MP Navigator EX 4.0.
Canon advised me to open MP Navigator and select 'View and Use', where it says 'Specify the scanned location', select a different scanner location to see if this resolves the issue. I am unable to do this as I get the "insufficient memory" message immediately I double click on the Canon software. If this did not resolve the issue, they recommended uninstalling and re-installing the latest drivers, which I have done but with no solution to the problem. I haved repaired permissions, checked printers in the library and there does not seem to be anything missing or conflicting. I cannot find any reference to TWAIN in the Library and finally the basic scanner functions are available using Image Capture.
Any ideas most welcome. Thanks

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Universal Scanning Program for canon lide 30 (older scanner

i have a canon canoscan lide 30 scanner. the drivers and toolbox are not supported with leopard. you can get it to work but theres alot of work arounds , turning off permissions on folders etc. so i was wondering does anyone know of either a free program or a inexpensive one, that i could use my canon lide 30 scanner with. i tried the program vuescan, cost 40 but wanted to see all my options cause i'm done with trying to make canon drivers and programs works
thanks

Elements 2 should work in 10.4.6. Install PE, then download an install the latest driver for your scanner. (Elements (any version) is not scanning software on its own--it's just that many scanner manufacturers include a PS/PE plug-in for convenience.)

Driver for Canon LiDE 500F and Mac OS X 10.7.3

I can´t make the scanner Canon LiDE 500F work with OS X 10.7.3 - CanoScan Toolbox "failed to open a driver."

You may need to get the LiDE 700F. However, try the driver for the 700 and see if you 500 will work with it:
http://www.usa.canon.com/cusa/consumer/products/scanners/film_negative_scanners/ canoscan_lide_700f#DriversAndSoftware

Best color matching settings for canon pro9500

I tried different settings for printing 13x19 photos. Printer color management, photoshop color management with different color options. Always a difference with preview... Help please. I have no problem when printing with my old ip6700d!

1. Calibrate (I use ColorVision's Spyder http://aps8.com/spyder.html , but any hardware calibration device will be better than calibration by eye).
2. Set the Working Space to sRGB.
3. Set the Color Management Policy for RGB to Convert to Working to be sure you are converting content to sRGB. (2 & 3 addressses pfigen's concern about making sure all images are sRGB.)
4. Make sure your monitor is set to use the ICC profile generated by the calibration device.
5. Turn off Proof Colors.
6. Embed profiles or not, but if you do use the sRGB profile. Whether it gets used or not is another story.
As far as B&W, pfigen suggests Gamma 2.2, which would seem to be right for PC. Mac users might consider Gamma 1.8.
This should work well for most situations, but guaranteed consistency is an impossible task at this point.

Settings for Canon EOS 450, Adobe Camera RAW, PS CS 5 and printing photos

I have a Canon CS EOS 450, have used PS CS5 in the past. I have now been made aware of Camera RAW and have started using it. My problem is that the images varies when I open the photos in different programs. My laptop is a HP Probook, 64 bit, Windows 7, etc.
So, my question is about settings on the different devices; Camera and programs:
1. I shoot in RAW, so I believe no change in camera settings.
2. Adobe CR- I use white balance, contrast, clarity, and vibrance. Any programme changes on ACR programme necessary (ie colour, etc in the programme to match with my screen?))
3. Biggest difference between moving from ACR to PS CS5- usually a big difference between these two (colour; sharpness)
4. And what would be the best proramme to watch the photos that will look as close to what I will get if I print these in photos?

You should read up on color management. It's relatively complex, and is difficult to teach in a forum thread.
Your raw conversions are (if you haven't changed the defaults) being converted to the Adobe RGB 1998 color space.
I suspect you'll see some initial improvement in consistency by doing the following:
Open a raw image to get the Camera Raw dialog.
Click the little link at the bottom center.
Change the Adobe RGB default color space to sRGB.
Complete the opening of the file.
This will set the color space for further conversions to sRGB, which is likely going to seem more consistent when you open the images in your other apps.
After you learn more about color management, and you understand how the parts interact and what additional steps you'll need to consider, you may well want to change this setting back, or even go so far as to change it to ProPhoto RGB, which has the largest gamut.
-Noel

Which sequence settings for Canon Rebel T2i ?

Hi everyone!
I need immediate help. A friend of mine did a rough cut of a project (in Windows Movie Maker) shot with a Canon Rebel T2i.
He gave me the file (in .wmv), so that I could do a little color correction and sound editing in Adobe Premiere Pro CS 4.
I am not sure which settings I have to choose when creating a new project.
I guess the settings that I chose were wrong, because when I played the video, there was something like a blue flash covering half of the frame every second.
What should I do?
Here is a picture:

Hi there
You should re-post this in the Premiere Pro forum. This forum is for Adobe Captivate discussion.
Click the link below, then on the page that appears, click the drop-down selector and choose Premiere.
Click here
Cheers... Rick

*** Sequence settings for Canon 5DmkII video

I'm trying to edit video footage from the new Canon 5D mkII and I don't know the sequence settings. The playback is really stuttery and jittery so I'm wondering if there's a plug-in or something that I need. Does anyone know?
Thanks in advance!

That shoots h.264 I believe, which is a delivery codec, not an editing codec.
Convert it to an easy set up for FCP, ie pro res, DVCProHD or something in the easy set ups using QT Pro

Import/Export Settings for Canon T4i Video

Hey folks,
I'm new to Premiere and loving it, but I'm wondering what the best sequence settings, as well as export settings, will be for video captured from my Canon Rebel T4i camera.
I prefer to shoot either in 1080p with 24 fps, or 720p at 60 fps––what settings within premiere should I use when setting up my project, and what are some good export options for Youtube/Vimeo?
thanks!

FAQ: How do I choose the right sequence settings?
FAQ: How do I export a movie for YouTube, Vimeo, iPad, iPhone, or Apple TV?

Develop defaults - My settings for Canon 5DmkII

These are the default develop values I use on my Canon 5DmkII. (After many hours testing on 100+ images)
Comments and advice welcome...
Landscape, ISO 100-200, 24-105 Lens
CameraProfile = "Adobe Standard",
Clarity = 20,
ColorNoiseReduction = 15,
ColorNoiseReductionDetail = 80,
Contrast = 25,
EnableCalibration = true,
EnableDetail = true,
EnableLensCorrections = true,
LensProfileChromaticAberrationScale = 100,
LensProfileDigest = "0387279C5E7139287596C051056DCFAF",
LensProfileDistortionScale = 0,
LensProfileEnable = 1,
LensProfileFilename = "Canon EOS-1Ds Mark III (Canon EF 24-105mm f4 L IS USM) - RAW.lcp",
LensProfileName = "Adobe (Canon EF 24-105mm f/4 L IS USM)",
LensProfileVignettingScale = 100,
LuminanceNoiseReductionContrast = 50,
LuminanceNoiseReductionDetail = 70,
LuminanceSmoothing = 10,
ProcessVersion = "5.7",
Saturation = 5,
SharpenDetail = 80,
SharpenEdgeMasking = 25,
SharpenRadius = 0.8,
Sharpness = 40,
Vibrance = 20
Landscape, ISO 400-800, 24-105 Lens
CameraProfile = "Adobe Standard",
Clarity = 20,
ColorNoiseReduction = 20,
ColorNoiseReductionDetail = 60,
EnableCalibration = true,
EnableDetail = true,
EnableLensCorrections = true,
LensProfileChromaticAberrationScale = 100,
LensProfileDigest = "0387279C5E7139287596C051056DCFAF",
LensProfileDistortionScale = 0,
LensProfileEnable = 1,
LensProfileFilename = "Canon EOS-1Ds Mark III (Canon EF 24-105mm f4 L IS USM) - RAW.lcp",
LensProfileName = "Adobe (Canon EF 24-105mm f/4 L IS USM)",
LensProfileVignettingScale = 100,
LuminanceNoiseReductionContrast = 25,
LuminanceNoiseReductionDetail = 65,
LuminanceSmoothing = 15,
ProcessVersion = "5.7",
Saturation = 10,
SharpenDetail = 40,
SharpenEdgeMasking = 35,
SharpenRadius = 1.0,
Sharpness = 40,
Vibrance = 20,
Portrait, ISO 100-200, 24-105 Lens
CameraProfile = "Adobe Standard",
Clarity = 10,
ColorNoiseReduction = 20,
ColorNoiseReductionDetail = 60,
EnableCalibration = true,
EnableDetail = true,
EnableLensCorrections = true,
LensProfileChromaticAberrationScale = 100,
LensProfileDigest = "0387279C5E7139287596C051056DCFAF",
LensProfileDistortionScale = 0,
LensProfileEnable = 1,
LensProfileFilename = "Canon EOS-1Ds Mark III (Canon EF 24-105mm f4 L IS USM) - RAW.lcp",
LensProfileName = "Adobe (Canon EF 24-105mm f/4 L IS USM)",
LensProfileVignettingScale = 100,
LuminanceNoiseReductionContrast = 25,
LuminanceNoiseReductionDetail = 60,
LuminanceSmoothing = 15,
ProcessVersion = "5.7",
Saturation = 5,
SharpenDetail = 40,
SharpenEdgeMasking = 30,
SharpenRadius = 1.4,
Sharpness = 35,
Vibrance = 20,
Etc.
Interested on other peoples ideas, settings, etc...
Mike
Note: I use Rob Cole's 'Collection Preseter' and a load of smart collections to apply these settings... I have a load more dev presets, including adjustments for extra sharpening when certain focal lengths or apertures are used, etc.

That shoots h.264 I believe, which is a delivery codec, not an editing codec.
Convert it to an easy set up for FCP, ie pro res, DVCProHD or something in the easy set ups using QT Pro

Settings for canon lide 210

Similar Messages

Maybe you are looking for