Settings for Capture and edit HDV

I Bought two Sony V1's yesterday and shot a wedding with them today. No problem capturing the footage but when I place it in the time line I need to render. ( Red line above footage) So i guess the settings are wrong.
In the Audio/Video tab, I have
Sequence preset HDV - 1080i50
Capture Present HDV
Device Control Preset Sony HDV Firewire
What else havent I done? (It was a 13 hour shoot so I'm a bit tired but just wanted to see how it looked. Maybe a good night sleep will help!)
MacPro Mac OS X (10.4.8) Two 3Ghz Duel Core Intel Xeon 4 Gig ram

You are going to get this sort of thing a lot. When you try to print to tape at the end it can happen again.
If you are getting problems you should reset your easy settings and copy and paste the edited material (not the sequence or you wil just nest the old sequence inside it) into a newly created easy set up sequence.

Similar Messages

Why don't iMovie support native HDV capture and editing?

i would like to see iMovie HD 6 to support native HDV capture and edit. is it possible?

no, FCE-HD (what an abreviation!) uses the same trick as iM-HD, converting HiDef into AIC....
native HD is really more for the pros... yet! I think, the basic problem to be solved first is -r media, meaning, any HD/blue-ray-DVD-r disks, which make it possible for the average user to store his/her products.... but as far as I follow the discussion, right now the industry is caring more for commercial disks, and that HDMI "problem" (broadcasting can include a copyprotection, so no use of any HD/DVD HiDef recorders...!)... finally, we can record only our selfmade movies... maybe that's a little less joy...
actually, converting finished HDmovies into h264 with a high bitrate and storing that onto hd is the only realistic option........

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

What for a live event capture and edition ?

Hi there,
What software is best for a live event capture and edition ? (for an instant public feedback) a one with the ability to be controlled by a 2-octave midi keyboard.
Can FCP do that ? even partly ?
The idea is to be able to do the same then tv shows (live cuts and effect layers)
thanks,
Ionel

FCP is a professional non-linear editing application ... not a live event playback device.
If you need a very fast turnaround editing facility you can look at FCP coupled with something like Picture Ready from Gallery, you can download a demo to test
if you're looking at doing a 2 camera live cut/switch then you can consider a dual decklink I/O solution and On-Air 2.0

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

My HVR-A1U was able to capture just fine. The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart. I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky. I mean heck, it found three in a one minute timeframe. My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

Dvx100 24pa captured and edited at 29.97

Hi there,
I'm trying to rework an old project where i mistakenly captured and edited 24pa footage from a dvx100b at 29.97.
is it possible to perform a reverse telecine with cinema tools to remove the pulldown from a finished edit on a 29.97 timeline? if so, what settings should i use?
i normally remove pulldown on capture with 24pa footage, and edit in a 23.98 timeline, but this project is from before i knew better, and mistakenly worked in 29.97, and am now suffering from interlacing problems/duplicate frames.
any advice would be appreciated. i am trying to avoid recapturing and re-editing.
thanks for your help in advance

thanks guys...
these are both possible solutions that i didn't think of.
the situation with this piece is it is one long source clip, chopped down into 100+ short clips, with a lot of precise cuts, but unfortunately no respect for pulldown cadence.
using cinema tools, i have performed reverse telecine which seems to remove the pulldown for clips that have the right timing, and unfortunately, not for those that are off.
i should probally just re-edit, but this is the sort of project you really only want to do once.
i guess i'm hoping for an easy fix, and that probally doesn't exist.
i still have the digitized footage and the sequence (29.97). is it possible to somehow remove the pulldown of the source footage, and rework the timeline accordingly?
thanks again.

Capturing and editing on my primary drive?

I have two-500GB drives in my new Macpro, and I do not see how I could ever fill up the drive with the OS and applications installed (seems kind of a waste). I have read that it is not recommended to capture and edit video on the drive that contains the os and applications, and it should be done on a secondary drive.
1. What specifically is the problem with capturing and editing video on the primary drive?
2. Will partitioning the drive with the OS and applications installed, and capturing to the separate partition make a difference?
Thank you.

1. OSX creates a great deal of disk activity. Not only is the disk trying to feed the OS and the application commands, it also hosts the System Cache where RAM overflow goes to live until needed.
Adding the demands of REAL TIME media spooling (read/write) to this really busy disk can overwhelm it - leading to dropped frames etc.
2. Partitioning does not solve it. It is still one physical disk and subject to all the same demands as spelled out in #1 above. Partitioning may make some sense in organizing material but it will do nothing for system performance. Indeed, there is some evidence it will reduce realtime performance.
If you need more drive space, for fastest performance, get a PCI based esata card and add a series of external sata devices. FW800 drives will work quite well as well - especially for DV, HDV and uncompressed SD.
good luck.
x

Mega simple video capture and edit program. Cross platform.

Looking for a mega simple video capture and edit program. Am overseeing a bunch of small groups where we want each person in the group's story told. Some groups will have Macs, some PCs, some iPads, iphones, etc. So needs to be cross platform.
Really, the simpler, the better. Like targeting 5 year olds

Is there any software anyone recommends - Sorenson?
I am capturing regular dv from minidv.

Need advice ensuring my 25p is captured and edited properly.

Hi all. New to Final Cut and just got a DVX100BEN (PAL) and want to know what I have to setup to capture and edit 25p with Final Cut.
My train of thought here is that I can just use a standard DV PAL setup as the DVX100b stored 25p in a 50i stream. So my questions are:
1) Can I just use standard, interlaced DV PAL for capture?
2) Can I just use standard, interlaced DV PAL for the timeline or do I have to set it up as progressive some how?
3) When rendering, say to DVD can I just render using Compresser to DVD PAL as normal and all is good?
Also, viewer seems to deinterlace it's display so I was wondering if there is a way to get it to just show the rawm image, as it's already progressive from the DVX?
Cheers
Aaron Koolen

Well, noone offered me an answer, no matter where I looked, but after some searching I'm pretty certain that you just use the DV PAL template, keep everything interlaced and render out as DV PAL.
I say this because I found a post somewhere by Graeme Natress that pretty much said this.
So, personally, I'm happy with it. Now if you were wanting to render as a true progressive movie then you'd have to do something to tell your renderer to NOT deinterlace the footage.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
Torrey

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have check all mail settings for ID and password.

I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.

In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN

Im looking for a MacBook that is worth the money and decent for gaming and editing, any suggestions?

Im looking for a MacBook that is worth the money and decent for gaming and editing, any suggestions?
There all so AWESOME!

Then you are best to get a Macbook Pro. Your real aim should be the graphics card.
You won't be doing really good gaming on a discrete graphics card sharing RAM.
Depending of coarse what games you play.
eg. card games / COD games.

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

Settings for Capture and edit HDV

Similar Messages

Maybe you are looking for