Settings for changing data

trying to change the IP settings for source system get message
:Source system default settings are maximun values; input adjusted
i am changing from 5000 to 50 000, the max it allows is 5 000 where do i go from here?
thanks

Hi,
You can also try to change the default settings from the source system side. Goto Sbiw->General settings->Maintain control parameters for data transfer.
If it dosen't allow you to change the settings, take help from your BASIS team as the table is cross client.
Cheers,
Kedar

Similar Messages

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Settings for costing data in order types for plant maintenance

i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object. Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
Assign points as a way to say thanks.
Madhav Nanduri

How to How to get FI field status settings for General data

Hello All,
Can you please tell me How can I achieve field status settings for General data.
I have some code to get field status settings for account assignment block but I need General data block data.
Can you please help me with the same.
I got the below code to get field status settings for account assignment block But I need General data block information.
FUNCTION z_fieldstatus_getdetail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_BSCHL) TYPE BSCHL
*" VALUE(I_BUKRS) TYPE BUKRS
*" VALUE(I_SAKNR) TYPE SAKNR
*" TABLES
*" T_COBLF STRUCTURE COBLF
*" T_FIELDS STRUCTURE TCOBF OPTIONAL
*" EXCEPTIONS
*" ERROR_MESSAGE
* liefert Feldstatus in Liste t_coblf:
* Feldname (DDIC) nicht in der Liste -> Feld ausgeblendet
* Feldname (DDIC) in der Liste -> Feld eingabebereit
* required = 1:
* Mussfeld;
* required = 0: kein Mussfeld
* active = 0: Feld ausgblendet
* Als Hilfstabelle wird die gesamte Feldliste der Felder (t_fields)
* ausgegeben,
* deren Eingabebereitschaft im Customizing steht
DATA: ls_faus1 LIKE tbsl-faus1.
DATA: ls_faus2 LIKE tbsl-faus2.
* Feldstatus holen
CALL FUNCTION 'FI_FIELD_SELECTION_DETERMINE'
    EXPORTING
      i_bschl     = i_bschl
      i_bukrs     = i_bukrs
      i_saknr     = i_saknr
    IMPORTING
      e_faus1     = ls_faus1
      e_faus2     = ls_faus2
    EXCEPTIONS
      customizing = 1
      OTHERS      = 2.
IF sy-subrc <> 0.
    MESSAGE a613(/ssc/comon).
ENDIF.
DATA lv_char.
DATA int_coblf LIKE coblf OCCURS 0 WITH HEADER LINE.
DATA p_cobl LIKE cobl.
DATA: dummy_ktosl LIKE bseg-ktosl.
PERFORM kontierungsblock_ermitteln(sapff001)
TABLES int_coblf
USING lv_char(1)
ls_faus1 ls_faus2 dummy_ktosl.
t_coblf[] = int_coblf[].
SELECT * FROM tcobf INTO TABLE t_fields.
ENDFUNCTION.
Thanks in Adv.
Kaustubh

Hi ,
Looking at the question the first thing that comes to my mind is what is the organization structure that you are following .
As you have mentioned that you have used segment insted of profit center for splitting , what is the scope of profit center in your implementation .
in implementations where locations are devided as profit centes it becomes very necessary to mandatorily split the documents based on profit center .
in your case as you have set it as segment i dont find it an issue of you keeping it as optional as it will not give you and error during your operations , as you have made profit center optional in splitting charcteristics .
hope this suffices .
Regards ,
Dewang

Table Technical settings for transfer data from developemnt to Quality

Hi All,
Please let me know which table techinical settings required for to transport table with data from development to quality?
Thanks & Regards,
padmaja.

Hi,
You do not require technical settings to transport data from dvlpmnt to quality.
However, you can transport any tables entries with a simple trick:
(1) Create a workbench request
(2) Change the request (or its task) and add the following entry: R3TR TABU <name of table> =>
(3) Enter the key values you want to transport, e.g.:
- <client>* for all entries of the current client
- add additional restrictions for the table entry (<client><bukrs>* for all entries of a given company code)
Best regards,
Prashant

OWB Support for Change Data Capture

Hi All,
Has anyone got OWB working with the Change Data Capture feature in the Oracle 9i database? I understand that CDC works by publishing changes through an advanced queue, which in theory OWB 9.0.4 upwards can have as a data source, but there doesn't appear to be any explicit support within the GUI for capturing CDC changes.
I'm also working on the assumption that we're talking about Synchronous CDC as found in 9i. 10g comes with Asynchronous CDC which I guess presents a different interface to the receiving program.
So - is there any support for 9i Change Data Capture in OWB, and has anyone got this to work in practice?
thanks
Mark

Mark,
There is currently no explicit support for the 9i CDC. You can use Advanced Queues to propagate the changes, but you will have to custom-build the capture infrastructure on the source side (set up the CDC, enqueue the changes in the appropriate form into the AQ etc.)
OWB will explicitly support CDC (10g async, which is the least invasinve method) in our next major release currently scheduled to be release in November of this year.
Regards:
Igor

What are the apn settings for cellular data network on iphone 4 using straight talk

i have an iphone 4 and can not get the cellular data network to work unless connected to wifi and i am on the straight talk unlimited monthly plan.also can not send or recieve picture messages.what are the settings for the apn for straight talk for cellular data network?i have talked to several customer serv reps and tech support and supervisors working with straight talk ,but they all tell me sumthing difrent and none of them help.so they transfer me and then say they can only remain on a call a certain amount of time.Help?

Go here on your phone, see if you can add the correct APN settings to your phone:
http://www.unlockit.co.nz/unlockit/

BAdI or USEREXIT for changing data of purchase order header - ME21N

hello all,
I would like to ask you any way to change the field "reason for change" of the Purchase Order header.
I tried implementing the method PROCESS_HEADER of IF_EX_ME_PROCESS_PO_CUST
or changing reason_code of structure ekko in user exits EXIT_SAPMM06E_006 and EXIT_SAPMM06E_006
but it seems not to work.
How can i do?..
sap. v. ecc 6.0

>
Shiva Kumar wrote:
> Use the user exit : EXIT_SAPMM06E_012: This is triggered on saving of a PO...and user can add validations etc in the exit...
> Cheers
It doesn't work...
>
Martin Voros wrote:
> you get reference to object IM_HEADER in method PROCESS_HEADER of BADI ME_PROCESS_PO_CUST. On this object you can call two methods - GET_DATA and SET_DATA. GET_DATA returns structure with type MEPOHEADER. You can change your field here and then call method SET_DATA with your modified structure. This should work.
> Cheers
..same thing for this solution...
the field that i want to change is RSCOD inside structure EREVGRID...it seems to have also get_data and set_data methods ( IF_REVISION_ITEM_DCM ),
but I don't know which BAdI to implement that has a object type ref to EREVGRID...
Edited by: E_M on May 13, 2008 11:08 AM

How to change the settings for Last data update in BI

Dear All,
If you want to display that "Status of Data " field in the report... Then you need to set it at...
Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
If this is not set, then it will not show in report output.
Status of data is the time on which the latest load occured to the cube. Lets say, you have built a report on a cube which is loaded on 01/10/2007. When you run the report, the status of data will show this date 01/10/2007 until you load the cube again. In this case, if you load on 01/20/2007, the status would now show up as 01/20/2007.
If we want to display that field in the report...
Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
The above all is for BW 3.5
but i want to know for BI 7 and EP
Regards
venu

Hi,
First thing here is, in SM58 u r finding the entries means those are related to TRFC LUW's. we shuld never stop this unless those are not useful.
These TRFC's moves from the source system to different Target systems by their respective users.
As u said that these Entries are occupying the system resources i.e in accordance to that we have to increase our dialog process in the system not to simply stop that TRFC entries.
These trfc's move basing on the Dialog processes in the system i.e if the processes are free then these entries move freely from system to system.
Automatically system generates these LUW's when ur scheduling a load from R/3 to BI system.
This will not be generated to BI by a particular job in R/3.This depends on the volume of the data only.
So pls have a talk with BASIS team regarding the resource availability and the movement of the LUW's/TRFC's into BI system.
rgds,
Edited by: Krishna Rao on Jun 25, 2009 1:38 PM

Icloud settings for docs/data

I just joined icloud and set my settings to yes for docs and data. I realized I need to not do this since I need to password protect my info and I don't want it out there in cyberspace for work reasons. Some of my files are sensitive info. I am not sure that I can trust icloud to encrypt them properly. I want to remove the setting to not accept this to icloud, but when i try to change the setting it says that any docs that are in the cloud will be removed form my computer. I just added a bunch and don't want to have to hunt for them. How do I not lose all my hard work but remove this setting?

Open the docs that are in iCloud and save them locally instead.

Feature request - 'shadow' settings for changing locked VM settings

I have a possible idea for you that I know I would find helpful. I understand that certain VM settings can't be changed while the VM is running. I would love to be able to make the change so that next time the VM restarts, it can first have those settings
changed for me before starting up again. That way, I could make the change (although it would tell me it couldn't be changed right now), and schedule the computer to restart sometime overnight, so that I don't have to either a) get up at 3am to do it manually
or b)work out what powershell command to run which would shut the machine down, make the changes, then start it up again - and hope that I'd done it correctly :-)
I hope this is a useful feature request. Generally very happy with all the improvements you keep making, thanks.
(I didn't find anywhere else I could submit a feature request, so I hope this gets to someone that can use it.)

I like that as a feature for those who manage via GUI. It would be possible to create script to accomplish the same thing and then schedule the script for execution later. But for GUI users, it makes sense to me.
I think the forums would be a good place for putting feature suggestions. It could easily be a Sticky post that would always appear at the top of the forum. Anyone with an idea for a new feature could add a post to the Stickey post, and
Microsoft PM's could just read that Sticky post from time to time. And, the built in Vote capability would allow other forum readers/contributors the ability to vote on it if they like it. It would be a useful Sticky post on any product forum.
.:|:.:|:. tim

Bug in SQL Server 2008 R2 for Change Data Capture (CDC)

I'm pretty sure I've encountered a bug in SQL Server 2008 R2 that's been fixed in 2012, regarding changing the design of a database using CDC. With CDC disabled on a table with sys.sp_cdc_disable_table, I can add a column or change a column's data
type, but when I call sp_rename, on 2008 R2 I'm getting "Cannot alter column 'xxx' because it is 'REPLICATED'.", even though the table's properties shows "Table is replicated" as False. In 2012, works fine.
Even calling sys.sp_cdc_disable_db didn't prevent this error.

Feel free to file a request on http://connect.microsoft.com
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

BW extraction settings for Billing Data from SAP ISU SYSTEM

Hi dudes,
iam currently extracting data from sap isu to bw systesm,but even after generation of many billingmaster dats i dnt find nay record to be extracted in bw system since some settings are missing in isu suystem for extarction process of Biliiing data,
Kindy help me in this regarding the settings to be made for succesful extraction from isu to bw
kr
raj

Dear Mr Memminger,
unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
But could give me a hint where to find the configuration setting for Delta queueing ?
Best regards,
Peter von Schubert
Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM

CAT2 - Help required for changing data

The requirement I have is, if the data is entered for a particular activity type in CAT2, and if it exceeds the default hours alloted for that week, the extra hours need to be split into different activity types.
Say, this is the data entered: (Max of 35 Hrs per week as per IT0007) (Click on the link below to see sample data!)
[http://img32.picoodle.com/img/img32/5/12/21/f_datam_9dfadb2.jpg]
(The value for Thu is 5 and not 6 in the initial entry.)
The data has to remain exact until it reaches 35 hours and then the extra hours need to be split and entered in a different activity type. (BU is also counted as regular working hours and value for BU is to remain same)
I tried using the user-exit CATS0002 but since the user exit gets only the value of a single cell at a time, I am not able to process the data for my requirement. and this user exit is triggered only for the cells where the value is changed... if the data is already entered and the user changes some cell, I don't get the whole data entered and hence, I can't modify the already existing data on the timesheet.
Has anyone coded for a similar scenario? Your help will be really appreciated.
P.S: I am working on ECC 6.0

Hi Nazim,
There is an user-exit for validating the whole time sheet (I think it is nr. 6, but I am not sure), in this one you could check all the hours, but I am not sure if it will suffice for your requirement.
Regards,
Martin

Security settings for Packages Data Source

Hello,
Can someone please help me or address me to some technical advise about the way to configure the security options of a folder designed as a Data Source for Packages (or OS Images) to work with SCCM 2012? I'm having a lot of troubles in distributing
content from network shares (access denied and the like).
I've set up the Security Options for Data Source folder so that they inlcude full control for:
any SCCM admin user
site server computer account
distribution point computer account
what else should I put in?
Thank you very much!
Davide

Hi,
Please check despool.log on the primary site. There might be some errors about the WIM OS image.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Settings for changing data

Similar Messages

Maybe you are looking for