Settings for Desktop Intelligence Report Server

Hello,
can explain me te settings for the Desktop Intelligence Report Server.
Mainly the difference between "Minutes Before an idle connection is closed" and "Minutes Before an idle report job is closed". Shoud the have the same timeout ??
thx
Alex

Hi,
The idle connection time out: Specifies the amount of time, in minutes, that the server waits for requests from an idle connection. Setting a value too low can cause a user's request to be closed prematurely. Setting a value too high can cause system resources to be consumed for longer than necessary.
so its fine its not necessary that both should be the same time. But by default both of them are 20 min.
Thanks,
SK.

Similar Messages

Determine used desktop intelligence report server

We are using a clustered environment with 2 desktop intelligence report servers (bo xi release 2).
Is it possible to know what report server is used for viewing or refreshing a deski report with the enterprise or reportengine sdk?

Hi,
The idle connection time out: Specifies the amount of time, in minutes, that the server waits for requests from an idle connection. Setting a value too low can cause a user's request to be closed prematurely. Setting a value too high can cause system resources to be consumed for longer than necessary.
so its fine its not necessary that both should be the same time. But by default both of them are 20 min.
Thanks,
SK.

A scheduled Desktop Intelligence report runs indefinitely on the server...

If we delete the report through InfoView or Instance Manager, the report still appears in the Desktop Intelligence Job Server metrics. We tried pausing it first before deleting it but it does not pause the report in "running" state. The only way we are able to remove it from the Desktop Intelligence Job Server is to restart the Desktop Intelligence Job Server and CMS.
Is there a different way for this? Perhaps have the report time out or something?
FYI, I've noticed that the connection server pooling timeout setting is set to no timeout. Would setting this to a certain number solve our problem?
Thank you in advance for your help!
Voltaire Pagador

Hi Gina,
I would assume you are after the Desktop Intelligence Processing Server - new term in XI 3.1 - formerly known as DeskI report server in R2. Feel free to let me know if this is not correct.
Steps on adding a new server in CMC are all contained in XI 3.1 Administrator's guide page 170.
The document can be found in our SMP product guide area.
In addition, it has the steps on cloning a server and deleting a server for your reference.
Hope this helps.

Web Intelligence Report Server - Error: Failed to run rexec. Error number

Hello,
I post a message in this forum :
"When i want to start "Web Intelligence Report Server" with CMC, i've got this error :
Web Intelligence Report Server: Echec du démarrage/de l'arrêt du service sur l'ordinateur distant : Error: Failed to run rexec. Error number: %12.
Any idea ?"
I've do this command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
bouser@v-bo-1 bobje$
but i have always the same error "Error: Failed to run rexec. Error number: %12".
Thanks

Please try to avoid posting duplicate forum posts.
This command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
Restarts RAS server and has nothing to so with WebIntelligence.
To be able to Start/Stop servers from CMC, you have to have rexec running on your Unix box.
Google rexec for more information on what it does and ask your Unix admin to enable it.

Accessing BO XI Desktop intelligence reports through ASP 3.0

<p>I am trying to view BO XI Desktop intelligence reports through a customized application in ASP 3.0. The examples that I have come accross are all related to Crystal reports and none is related to BO XI ".rep" files. Please let me know if anyone can help me with the solution.</p><p> Regards</p>

Hello Amit,
please see a sample for [accessing DESKI reports in .NET|https://boc.sdn.sap.com/node/18954].
Please find more [.NET samples on our dev zone|https://boc.sdn.sap.com/dotnet/samples].
Falk

What happens to Desktop Intelligence reports when a universe changes name?

Post Author: GregPye
CA Forum: Desktop Intelligence Reporting
Hi
We are experiencing intermittent issues with our DeskI reports that are pointing to a universe that subsequently changes its name.
We seem to have some reports that cope with the name change perfectly well, and other reports that "cannot find universe" because it is looking for the new name.
The issue with the latter, is that if DeskI cannot find the universe, it will then not allow you to repoint the universe in the View Data pane. When such reports are found, our workaround has had to be:
1) copy universe and rename with old universe name
2) open report and repoint to newly named universe name
3) delete old universe name
Should all reports automatically update when the universe simply changes their name? Why do some reports not do this? Is there something we can do to alleviate the situation?
Many thanks
GP

bashphoenux wrote:what does "this" refer to ???
I was referring to the problem you reported "the screen freezes for an idefinite amount".
I thought it sounded like this:
https://bbs.archlinux.org/viewtopic.php?id=103522
Look at the mail mesage in the link in the 4th post.
Last edited by loafer (2010-09-07 15:15:27)

What's happaned with Web intelligence report Server

Hello
Im making a document about the BOE XI 3.1 server and when i saw the services in cmc web app i dont the services:
Web intelligence report Server
Web intelligence Job Server
Dont this services exist anymore?
Thanks
Vegas

I believe they are called adaptive processing/job servers now, from the CMC services there should be a sub category for webi, the new names are listed under there.
Regards,
Tim

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

Creating BusinessObjects Desktop Intelligence report

Hi All,
I am new to Business Objects, though i have idea on administration. where can i find the steps to create Business Objects Desktop Intelligence report.

you can read the Desktop intelligence user's guide
it will help you much
http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_desktop_intelligence_access_and_analysis_guide_en.pdf
good luck
Amr

Scheduling Error For Web Intelligence Reports

Dear Experts,
    I want schedule BO XI R3.1 SP 3 Web Intelligence reports.
    For this i want to give Adaptive job server :destination details.
    Can you suggest what i need to enter for below details?
   1)Host    ?
   2)Port?
   3)Domain Name?
   For Host can i give BO CMC name or can i give BO Server IP Address or suggest me right one?
   For Port can i give CCM -->Adaptive job server PID value or CMS Port or SIA Port or Suggest me right one?
   For Domain name what i need to enter?
   The errors i am getting as shown below while scheduling with different ways as i mentioned above..
Error Message:     server error. []: [CrystalEnterprise.Smtp]
Remote Instance in Federated Cluster:     No
   Error Message:     server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason:                               [Port address].] [CrystalEnterprise.Smtp]
Reply will be appreciated
Regards,
Venkat.

Thanks a lot Konovolav,
Can you tell how can i find SMPT server details to fill host, port and domain name for email scheduling?
I can able to connect to Internet in my BO server.
Can you tell me the path to find above details?

Settings for publish the reports in EP

Hi Guys
Does any one have any documents that shows clear steps on how to publish the Quereies in Portal....Iam new to this and need to know the settings to publish the reports in portal ...We are now using BEx analyser...I will assign points
Regards

Hi
we can publish ur reports directly from the BEx analyser by clicking the globe button.
You use the Broadcasting layout profile to display precalculated objects or online links that you have published in a KM folder using the BEx Broadcaster.
This layout profile is tailored to the needs of users who work with business intelligence content in the portal. By default, it is preset in the KM navigation iViews BEx Portfolio and My Portfolio in the Business Explorer portal role.
You can apply the layout profile to the KM folder that you want to use for your business intelligence content.
The technical name of the layout profile is Broadcasting: ConsumerBroadcasting.
Refer to this link
http://help.sap.com/saphelp_nw04s/helpdata/en/bf/220c40ac368f5ce10000000a155106/frameset.htm

Getting printer information for Desktop Intelligence (FullClient) object

After I query * from CI_INFOOBJECTS for a FullClient object, I am having problems accessing printer info:
IFullClient deski = (IFullClient) obj;
IFullClientPrinterOptions optPrint = deski.getFullClientPrinterOptions();
integer copies = optPrint.getCopies();
raises an exception that SI_COPIES property does not exist.
Please help.

There's a SDK method because you have to set it before you can get it.
I'm assuming you haven't set any printer options for those FullClient documents.
To see if printer setting has been set, check getFullClientPrinterOptions().isEnabled(). If false, then there's no guarantee any of the properties for the IFullClientPrinterOptions have been set.
It's different for Crystal Reports, since Crystal Reports are strongly tied to the printer against which the report was designed, so it's always there (or set to a virtual "No Printer"). Desktop Intelligence (FullClient) is not.
Sincerely,
Ted Ueda

Find heap memory Size for Web Intelligence processing server in BO 4.0

Hi All ,
We need to gather data for sizing inputs.For Adaptive processing server , we can find same by going in CMC> Server > APS > Properties & check value for the parameter -Xmx . Could you please tell how to find the max heap memory allocated for a Web Intelligence processing server in BO 4.0 as for Webi server this parameter is not maintained. ?
Regards ,
Abhinav

Hi Abhinav,
The maximum threshold is a value which may reach on peak usage and Webi processing server cannot occupy memory beyond this value at any time.
In your situation 9 Webi Processing servers with 16 GB of RAM on server is not recommended. This is because consider situation with total 16 GB of host RAM.
4 GB should left for OS
Tomcat will need minimum 2 GB for 200 users
So you are left with 10 GB RAM for all BO services
Now 9 Webi Processing servers with 6 GB of Threshhost will not work here
For this configuration you can have 2 Webi Processing servers with default threshold should be running on single host.
Regards,
Hrishikesh

Dlls are not working for me in Report server

Hi,
I am using SSRS 2008 and deployed some reports to the report server. For localization purpose we are having some Dlls which need to be registered in the report server. I am using some methods from the dll.
Can someone please suggest how I can register these dlls to work in the report server for 2008, R2 and 2012.
Thanks,
sarat chandra sahoo

Hi sarat,
Per my understanding that you have issue when you registered an dll and use the method from it, right?
Generally, You can follow steps below to make the custom assemblies works fine:
Create a custom assembly
Copy the custom assembly to the SQL Reporting Services folders
Adding a reference to the custom assembly in Reporting Services
Code access security if the custom assembly requires additional permissions
Details information about the above steps below for your reference:
How to use custom assemblies or embedded
Some similar related:
http://www.codeproject.com/Articles/294636/Localizing-SQL-Server-Reporting-Services-Reports
http://stackoverflow.com/questions/19938268/using-external-assemblys-methods-results-as-a-dataset
http://www.codeproject.com/Articles/30555/Adding-Custom-Assemblies-in-SQL-Server-Reporting-S
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Best settings for desktop i7?

I installed After Effects CC 2014 on a computer with i74790k, Radeon 6850 and 8 GB of RAM.
The program runs smoothly but it makes Windows 8.1 a bit unresponsive, for example opening and closing folders take longer, also browsing files, opening the start menu, etc.
What are the best settings for decent editing and desktop stability?

Check your memory and multiprocessing settings. The RAM reserved for other applications probably needs to be higher.
lonnrot wrote:
Bare minimun according to whom?
Minimun requirements according to Adobe:
4 GB of RAM (8 GB recommended)
According to almost everyone who uses it. The 4GB is the bare minimum for it to run. However, you need more than 8 for it to run well. I'd consider 16 as a minimum for it to run well, but considering how cheap and easy it is to upgrade RAM, I'd put more than that in your system if possible.

Settings for Desktop Intelligence Report Server

Similar Messages

Maybe you are looking for