Settings for h264 with multichannel audio

Hi everybody, I would need to export h264 with 5.1 audio via Compressor. The exported movie will be played from computer connected via HDMI to Onkyo reciever.
In Final Cut I have 6 audio tracks assigned to the corresponded channels, I tried to export with h264 preset with audio set to AAC 5.1. The weird thing is when I open the exported movie in QT, movie inspector tells me there are 6 audio channels, but when I bring the exported movie back to FCP there are only 4 audio tracks.
Does any of you have experience how to export the h264 with 5.1 audio to make it playable correctly from PC? Thanks.

Check; in FCP, in the Sequencer Settings (Control + 0), did you set the audio preset to the *5.1 preset* AND did you then manually set all the groups to *Dual Mono* AND did you set *each audio track* on the Sequencer (right-click on each of the 6 audio tracks) to their *respective channels* (e.g audio track 5 should be set to audio channel 5).

Similar Messages

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Metadata with Multichannel Audio doesn't work...

    I've been attempting to create metadata entries for some movie files and have found that the data will display properly only if the file has 2-channel audio. Other files with multichannel audio will not display the info correctly from within iTunes. I'm referring to such things as the poster frame, movie rating, list of actors, and description. I've used some freebie apps such as MetaX and vID Infiltr8 to get the 2-channel files to work, but no success with 6-channel audio files. Is this a bug, or will I need to acquire some additional software to import the data correctly?
    Thanks...
    PowerMac G5   Mac OS X (10.4.9)  

    To revert to 10.6.3 or whatever you were using before 10.6.4, you'd need to reinstall the earliest Snow Leopard version you have (either the one that came preinstalled on your machine, or if the machine is older than SL, then the Snow Leopard version that you got on a DVD later). Then reapply the Combo Updater for the version you want to revert to (10.6.1, 10.6.2 or 10.6.3). Then run Software Update to get all the ancillary Apple updates that are compatible with that version of SL.
    I presume from your interest in reverting that you had the Kanex adapter before you updated to 10.6.4, and it worked as expected then. Is that correct?
    If it isn't, and you haven't had the Kanex adapter working correctly at any time in the past, then I urge you to hold off on downgrading the operating system at least until you've gotten some substantive feedback from Kanex tech support and other posters here.

  • Broadcasting MPEG 2 video with multichannel audio

    Dear sir 
    Using PrPro 2 or CS4 I want to export MPEG 2 video with multichannel audio  ( 2 separated stereo channels ) for broadcasting purposes .
    As you know there are some TV channels that allows you to switch between two audio tracks , which I am  looking to accomplish
    This is some of specifications that I use for video production :
    1. Primer  DV PAL preset .
    2. AVI format
    3. Canopus Grass Valley ProCoder 3 ( to convert video from AVI to MPEG 2 ) according to the Broadcasting standers .
    As you see I'm not able to separate the 2 Audio tracks when I try to export the video file.
    So If you have specific method or steps to apply ( 2 separated stereo channels ) for one video file , please be kind to inform me with it .
    also please let me know if I missed any details .
    Best wishes

    Very very very nice that is all what I am asking for .
    I tried and it worked perfectly but the file has a .VOB extinction … I changed it to .mpg and now I can play it in Windows Media Player too .
    Ok , so far so good, your advise was very helpful so thank you very much but what abut broadcasting ? is it going to mach the broadcasting standers ?
    I know.. these are lots of stupid questions but I am asking if you know any thing about it or some resources that can be used.
    When I converted it using The ( Procoder ) to mach the broadcasting standers I got only one audio track .
    I appreciate the generosity and your attention .
    Best wishes

  • Settings for PHP5 With Apache 2  and SAPRFC in WIndows

    Hi,
    Can anyone give me the exact version of software that needed for the settings for PHP5 with Apache 2 and SAPRFC in Windows.Thank you

    If it's just a test/dev environment you need you can try "<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn?rid=/library/uuid/e50bd86e-0a01-0010-53bd-857585234a6a">scripting in a Box</a>" it also lists the versions and pieces needed for the setup you are looking for.

  • Saving Settings for use with Export using Quicktime Conversion

    Dear All,
    Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
    All the best, Sean

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • Could you guide the settings for GWI with MS Outlook for CRM 7.0 .

    Dear Experts,
    Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
    1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
    2. How to set up (configure) in crm 7.0 and MS out look.
    3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
    4. Can we get masterdata like Accounts and Products in MS Out look tool?
    5. How we can map activity from MS out look to CRM?
    Regards,
    Jemmi.

    Please see my answer to your identical threat in forum Webclient UI.
    Please open your questions only in one forum.
    Kind regards
    Manfred

  • Could you guide settings for GWI with MS Outlook for CRM 7.0 .

    Dear Experts,
    Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
    1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
    2. How to set up (configure) in crm 7.0 and MS out look.
    3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
    4. Can we get masterdata like Accounts and Products in MS Out look tool?
    5. How we can map activity from MS out look to CRM?
    Regards,
    Jemmi.

    Hello Jemmi,
    a lot of questions
    Here some answers:
    1. You do not have to install the add-on to CRM. It is a add-on to outlook. Just start the setup.exe you downloaded from the marketplace and select MS-Outlook and your language.
    2. In CRM70 customizing search for "client profile" - here you will be able to customize for different businessroles different GWI settings. The settings will be synchronised to the client. You will not need to do settings on the client.
    3. Biderectional is theoretically possible. We only use CRM to Outlook. If you do it the other way round you have to think about obligatory fields in CRM and where do you get the account ID from and and and. CRM to Outlook is simple.
    4. Accounts and Products i guess no in standard. But contact persons is possible, appointsments and tasks are also possible.
    5. No answer, we do not use this.
    I hope this helps.
    Good luck.
    Kind regards
    Manfred

  • Lazy Nezumi - settings for use with CC

    I am finding it hard to find my way round way this software - the incomprehensible (to me) manual doesn't help - and I'd be grateful for a steer on what are good default settings for smoothing curves in freehand drawing.  None of the settings seem to help or have a simple and useful effect for freehand work.
    Can I assume that it only works with the brush tool and not with other tools like the Art History Brush?
    I know Trevor D has mentioned this software a couple of times.
    Thanks.

    David, you had me wondering there.  I don't think I have ever used the Art History brush.  I did try though, and initially thought LNP did not work with that tool, but with high settings I could see that it does.
    For smooth lines use the Massive Smooth preset with mode set to Moving Average.  The default values are good for the Brush tool, but seem to work better with much higher 'Amount' setting for the Art History brush.  But I have no experience with the Art history brush, and don't even have a clear idea how it works.
    Lazy Mouse with the Pulled string mode, are used for smooth lines with abrupt changes of direction.  You have to stop and move the cursor back a touch to take the tension out of the pulled string. Then move in the new direction and when the pulled string becomes taut the line will follow the cursor again. 
    Actually, the animated gifs on the site explain it better than my words
    Pulled String:
    Moving Average
    Moving Average + Catch Up
    I don't think that Guilaume ever sleeps.  He has never taken more than 30 minutes to reply to an email, even on Christmas day!  He is super helpful, and tends to respond immediately if you use the LNP Chat facility.
    If you check out the Feedback page, you'll find lots of LNP users that do 'similar' work to you, although I have to say none that were quite like your beautiful painterly type artworks.  You'll possibly recognize some of the names, and maybe swap some ideas with them.  It's quite a little community, but there isn't a forum unfortunately.
    I am not sure how relevant they will be to your work, but do check out the Constraint presets.  For line drawing I find they are really useful.
    Lazy Nezumi Pro - User Testimonials
    Having spoken nicely about your work David, it's only fair we let other users take a look
    New Artwork photoart,digital painting,drawing,sketches,
    But bottom line is to not hesitate to contact Guilaume if you need help.  He will definitely get back to you.
    [email protected]

  • Correct mail settings for iCloud with Mail

    I find this: to talke about setting up iCloud Manualy.
    iCloud: Mail server settings for email clients
    And then this for 10.6.
    http://support.apple.com/kb/HT5330
    But shouldn't either work for 10.6?

    Yes, they should work. For the outgoing SMTP, you might try using Apple Token instead of your password.
    You can share Mail, Calendars, and Contacts running Snow Leopard. Based on my experience, I don't recommend syncing Contacts - created a lot of problems with duplicates.
    Snow Leopard iCloud - Address and iCal
    Snow Leopard iCloud –  iCal

  • Optimal settings for AP1242AG with roaming

    Hello everybody, I need some advice on the best settings for my AP1242AG wireless radios.  I am using 2.4Ghz and not 5.  They are not lightweight and therefore I do not have a WLC.  I have only hooked up the right (primary) antenna on them.  I have 6 radios in an outdoor deployment, they have line of sight and are only about 500 feet away from each other so signal should not be an issue.  I have already established communication between two of the units successfully as a test so I am mostly there.
    However, I need help with the role in radio settings.  3 of the radios are mounted throughout a jobsite on poles so they are my main AP's.  The other 3 radios are in motorhomes that move around inside of the yard from time to time.  Therefore, this is similar to a multipoint to multipoint bridge configuration. Each of the 3 main units on the poles have a connection back to the main LAN and I am simply trying to get the LAN connectivity into each of the three motorhomes (so I don't believe I need to use any of the repeater options and this is similar to a bridge).   I don't know the best role in radio selection for this configuration that will allow everything to work together the best.  I also need the 3 remote radios to roam from one pole to the next as needed for strongest signal.
    Also, if anybody has additional advice on other settings I may want to change given my setup to help optimize, I would appreciate it.  I am obviously new to these units.
    Can somebody please help with this?  Thanks in advance!

    APs on poles : station-role root
    APs on motorhomes : station-role workgroup-bridge
    The workgroup bridge role allows to act as client, provide connectivity to whatever is connected on the wired interface of the WGB and also to roam.
    500 feet is a lot for 1242 with omnidirectionnal antennas (I suppose this is what you have since you're roaming around). I hope you tested it :-)

  • How can I convert video for iPhone with multiple audio/subtitle? (I am using Windows)

    Handbreak is available on Windows platform, however its conversion speed is too slow!
    I hope there are some tools that can combine my converted video together with my audio track and subtitle, and I can select between audio or subtitle inside my iPhone 4.
    Anybody can help me??

    Hi,
    Have you found a solution for this? Can anyone help with this?
    If I have a video track with multiple alternate audio tracks how can you play this on iOS?
    Thanks,
    Apurva

  • JVC GZ-HD7U MPEG Streamclip export settings for use with FCP

    There are a number of compression options in the free MPEG Streamclip 1.9.2 and it's unclear what's best or how I would figure that info out. My guess is Apple HDV 1080i50, Apple HDV 1080i60, Apple DVCPRO HD 1080i50, or Apple DVCPRO HD 1080i60. The default setting was Apple Motion JPEG A, but this produced a huge file and doesn't seem right anyway. I think the desired frame size is 1920 x 1080, but I'm uncertain if I need to end up with an interlaced or progressive .mov file. My selectable options for progressive/interlaced are: "Interlaced Scaling," "Reinterlace Chroma," and "Deinterlace Video." Selecting "Deinterlace Video" excludes use of the other two options.
    These clips will eventually be edited in FCP and I'm guessing that the appropriate settings will match whatever is selected at the export stage.
    I'm using the JVC Everio GZ-DH7U HD Hard disk camcorder...I'm not sure if JVC uses the same setting across the board for it's HD cameras or maybe just the Everio cameras are similarly designed??
    Thanks to all!!

    the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
    HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
    As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

  • Edit encoding settings for menus with animated background?

    Hi there,
    I just spoke with german support and they mentioned, that there is no way I can edit the encoding settings of encore how to generate the needed parts for an animated menu.
    In this case I have a PAL M2V progressive scan used as BG and after menu rendering encore has created a M2V for the menu with strange interlacing problems ...
    There seem to be options in the "project settings" > "default transcode settings"  dialog (translated form german), but they are grayed out. There seems to be one setting "lower field" and I can not change to "progressive" ...
    Its hard for me to believe that there are really no ways of altering the encode settings for menus. Has someone an idea?

    Because DVD is Interlaced and not Progressive, I would do the Export of that Motion Asset to Interlaced with matching Field Order. There is nothing to be gained by trying to force En to do things that are not allowed by the DVD-specs. It is an authoring app. and not an NLE, so it needs the best possible, DVD-spec. material to work with.
    Good luck, and hope that helps,
    Hunt

  • Change default settings for CaptureOnTouch with Canon imageFORMULA DR-C125

    Default settings for the CaptureOnTouch program get loaded automatically on startup for my Canon imageFORMULA DR-C125. I can personalize these settings, and take a backup, no problem. When another user logs into that very same computer with the very same scanner attached, they get the same automatically loaded default settings. In order for them to use the settings that I took a great deal of time to customize, they need to load the backup file that I created (whateverfilename.cot). It may seem like no big deal for somebody with some medium computer knowledge, but I have 50+ users logging into this computer, and I do not have time to show everyone of them what to do nor how to do it. Here comes my question: where are the defaults settings that Canon has created (which are so limited : they don't contain grayscale scan settings!) located on the computer (Program Files?) and what is the name of the file? I need to change these settings to something my users can easily deal with, and more importantly, I need scans that are nimble in size so that they can be emailed easily. Thank you so much in advance for you help! Stéphane

    right click sheet1=>select all sheet=>set print on one side.
    KR

Maybe you are looking for