Settings for material number conversion not found

"Settings for material number conversion not found"
This is the error that came out. I was everytime i try to access the activated business content 0material, the system comes up with this error. Please help me with this! Thank you!
-Peter

Hi Peter,
try oss note 555675, it tells you to use transaction OMSL.
regards
Siggi
Message was edited by: Siegfried Szameitat

Similar Messages

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

Serialization not possible for material number (SHPCON IDOC error )

Hello,
Can any one shed some light on following inbound PGI IDOC (SHPCON) Error from 3PL.
"Serialization not possible for material number XYZ"
Message no. IO205
Diagnosis
The serial number profile of the material does not allow serialization for the operation you have chosen.
Procedure
Maintain the serial number profile.
Additional info
1) Serial number profile is maintained in the material master
2) Serial number populated in the idoc E1EDL11 is not used in any delivery or assigned and it is valid serial number and has equipment master record
3) If i use the same serial number from the IDOC and post PGI manually via VL02N , I am able to post the PGI without any problems and I don;t get the above error
4) IDOC has all the info required , Delivery number,Valid material # , qty,UOM and Line item number of the delivery .
Thanks in advance for your help
GJ

Dear Jalwadi
I got exact same problem. How did you solve it?

Error in allocating Despatch serial number Interval not found Number object

Hi All,
While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
"Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
Message no. 8I336"
The Excise Group(say 99) was created.
But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object J_1IINTPR2.
Do the needful to resolve this issue.
Needless to say helpful answers will be rewarded.
Regards,
Raj Kumar Reddy.

Dear Raj,
Go to Excise group details here you check these settings
IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
Have you check all these check boxes
1.Excise Inv during billing
2.Create and Post Invsingle step
3,Depot Excise invoice
4.EI capture
5.Diuty Different at GR
6.EI create/RG23D selection
7.Update RG1 at MIGO
I hope this will help you,
Regards,
Murali.

Despatch serial number Interval not found Number object J_1IINTPR2

Hi all,
I am facing one error when creating excise invoice.
system shows the following error.
Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
For this, i tried to maintain number range in j1i9 object J_1IINTPR2.
Here system is not showing excise group number.
But for one company code it shows and another company code excise group code is not displayed.
Can anyone tell me what will be the problem?
Thanks in advance,
Babs

Thanks for your reply..........
excise group 10 belongs to first plant
excise group 20 belongs to second plant.
settings are maintained same for the two excise group.
excise group 10 is displayed in J1I9 (Number object J_1IINTPR2).
But excise group 20 is not displayed over there. I want to maintain number range for excise group 20.
Thanks in advance
Babs

While create inbound delviery Material number is not showing

Hi All,
I am trying to create inbound delivery with reference to Purchase Order.
While using BBP_INB_DELIVERY_CREATE to create inbound deliveries, the material number is not showing up in the VL33N screen but Material Description is coming.
As you have also faced same problem,can you please suggest how to resolve this issue?Your help will be highly appreciated.
Thanks
Santhu
Edited by: santosh jajur on Sep 24, 2010 12:48 PM

Hi,
This function module doesn't pass Material number while creating the inbound delivery. Instead you can use the function module GN_DELIVERY_CREATE along with NUMBER_GET_NEXT function module.
See line number 631 to 656 of include LBBP_SIC_40F02 (Called from Line no 18 of BBP_INB_DELIVERY_CREATE) for more details.
While using the function module BBP_INB_DELIVERY_CREATE, material number is not passed to the function module (GN_DELIVERY_CREATE) structure field XKOMDLGN-MATNR.
Regards
Vinod

BBP_INB_DELIVERY_CREATE-material number is not showing up in the VL33N

Hi All,
I am trying to create inbound delivery with reference to Purchase Order.
While using BBP_INB_DELIVERY_CREATE to create inbound deliveries, the material number is not showing up in the VL33N screen but Material Description is coming.
As you have also faced same problem,can you please suggest how to resolve this issue?Your help will be highly appreciated.
Thanks
Priyanka

Hi,
This function module doesn't pass Material number while creating the inbound delivery. Instead you can use the function module GN_DELIVERY_CREATE along with NUMBER_GET_NEXT function module.
See line number 631 to 656 of include LBBP_SIC_40F02 (Called from Line no 18 of BBP_INB_DELIVERY_CREATE) for more details.
While using the function module BBP_INB_DELIVERY_CREATE, material number is not passed to the function module (GN_DELIVERY_CREATE) structure field XKOMDLGN-MATNR.
Regards
Vinod

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

Path in itune \settings\extended correct but titles not found ( ! symbol )

Hi to everybody
I made probably a mistake somewhere trying to find a place for my 10 GB "iTunes Music" directory.
To make it short the situation is as follows:
Finally I moved back the "itunes music" dir to its original place in \ownfiles\ownmusic and indicated its place in \itune \settings\extended.
The path of "iTunes Music" is displayed in settings correctly but titles are not found: I got 3000 times "!".
If i click upon a title i am asked to indicate manually again its directory. then it works, but i would hate do have to do it 3000 times....HELP
acer Windows 2000

The ! means that the songs have been moved out of the iTunes music folder or even deleted altogether.
Use Explorer to search for them.
On the Start menu, click Search.
Click All Files and folders.
In the "All or part of the file name" field, type a song or album title and then click Search.
If you see the files you are looking for in the Search Results window, you can add them back into your iTunes library.
http://docs.info.apple.com/article.html?artnum=93140

I need to reinstall Creative Suite 5.5 Design Premium and it tells me it is a valid serial number but not found on computer

I need to reinstall Creative Suite 5.5 Design Premium and it tells me it is a valid serial number but not found on computer

Anne Marie Bartella please verify the serial number you are using is the same serial number registered with Adobe. For more information please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

SMOEAC site settings for material replication

SRM Gurus,
While doing the settings for material replication, in SMOEAC transaction
I am trying to create site 'SRM' of type CRM, In the site attributes if I enter RFC destination 'SRMCLNT001' and click on get values I am getting the following message "RFC destination SRMCLNT001 does not exist. No valid backend system".
Can someone please suggest what I need to check/configure to fix this issue?
Info:
R/3 side : RFC destination SRMCLNT001 (for connecting to SRM 5.0 system) created and remote logon tested OK.
Completed all CRM* table settings
SRM side: RFC destination R3CLNT800 (for connecting to ECC 6.0) created and remote logon tested OK
Thanks,
Arun

Make sure you have created the RFC destination in SRM also. You need to create the following:
RFC destination of SRM in SRM and in R/3.
RFC destination of R/3 in R/3 and SRM.
Regards, IA

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location.

Settings for J2EE Server do not exist

Hi I get the message "Settings for J2EE Server do not exist"
Where can I set them and what has to be entered ?
Regards
sas

Hi Erdem,
I assume that you get this error message while configuring you web service in ECC.
To make the setting for the J2EE server, go to the WSADMIN transaction, click on "Go To" in the menu above and select "Administration Settings".
You can enter the full URL (upto the port) of your J2EE server in the following format:
http://<<full server name>>:<<port number>>
Hope this helps!
Regards,
Romit

Settings for material number conversion not found

Similar Messages

Maybe you are looking for