Settings for Netgear DM111P router on Broadband......

My broadband keeps dropping every 12-14 hours and I think it might be the Netgear settings that are the issue.
BT have re-sync'd the line and all is OK.
Can anyone tell me the settings that I should have for MTU size, VPI/VCI, Protocal, Multiplexing Methods etc etc???
Thanks
Dave

MTU 1500
VPI =0
VCI =38
PPPOA
VC based Mux
DNS 194.74.65.69
194.72.9.34

Similar Messages

DNS Settings for Westell 9100EM Router

I have continuously been experiencing issues with Verizon's preset DNS setting when using DHCP, and therefore plan to use a different set of DNS servers (I hear that 4.2.2.1 - 4.2.2.5 are recommended in the DC area where I live).
I wonder, however, where to change the DNS setting in the router. The 9100EM has primary and secondary DNS settings both for the LAN (i.e. the internal network) (under My Network - Network Connections - Network (Home/Office)) and for the external WAN network (under My Network - Network Connections - Broadband Connection (Ethernet)).
Are the settings for both networks supposed to be identical, or can I use different settings for the LAN and for the WAN.
Any recommendations which DNS servers I should choose for either network connection?
Thanks a lot

ralf18 wrote:
I tried to set the LAN DNS at 192.168.1.1 but receive an error message ("DNS Server cannot have the IP address of Wireless Broadband Router Network"). The same happens when I set the DNS to the external IP address of the router.
If you are trying to do that in the router's UI, no kidding.
If you are trying to do that on a computer behind the router, perhaps the router does not act as a DNS Server relay.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

ADSL Broadband Settings for Netgear DG834GT (no In...

A few weeks ago my DG834GT had been working with BT ADSL (not Infinity) for a year before it died, so I bought another GT with the latest firmware, but I can't get Internet access.
I am currently using a HomeHub 2.0 which works fine, so I know my line is OK.
I reset to factory settings and everything works on the GT except Internet: wireless works, ethernet, admin panel etc.
With the DSL cable plugged in, no DSL/Internet light is illuminated, only the power, wireless and ethernet number. The router status page of the admin panel always shows "Connecting", with no IP and 0kbps Downstream and 0 Upstream. Obviously no web pages work either (can't connect to server message).
The ADSL settings that I've tried:
Multiplexing: VC-BASED
VPC/VCI: 0/38
Network Type: PPPoA
Login: [email protected]
Password: BT
I signed in to the HomeHub admin panel to see what settings it uses, which is PPPoA with 0/38. The email address is [email protected] and the password shows as ********
Have also tried various email addresses and passwords:
- [email protected]
- my own personal @btinternet email and password
- my name as in [email protected] and @btinternet.com
- password left blank
- password 0 (suggested by post on the forum)
Also tried PPPoE instead of PPPoA with the same various login details.
Also tried LLC-BASED instead of VC-BASED.
Also tried going through the wizard, which says it can't find the connection.
If anyone has a GT, or any Netgear router, could you please post your ADSL settings? Any other assistance would be appreciated too. My GT is Sky branded but I have flashed the firmware so it's now the same as an unlocked non-Sky one.
Thanks

Perhaps the firmware image was for the wrong ADSL chip set, as its the front end hardware that is failing.
Remember that firmware also has a large part in defining the parameters of the physical hardware inside. Also, are you sure the router was working on Sky beforehand, especially as you bought it from someone else?
Its possible that it was damaged in some way?
I assume you have tried a different ADSL line cable, perhaps the one from your other Netgear?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Settings for fios actiontec router using coax when adding time capsule as ac router

I would like to set up my new time capsule as my main wireless router on a fios coax-wan internet that is currently using the m1424wr revisiion I router.
What are the settings i should use for the actiontec versus the time capsule and what is the best way to set it up to take advantage of the AC wireless on the TC without losing set top box features providing by the actiontec router over coax?
I got the TC to conenct via WAN to LAN on actiontec but i think that may limit my ability to take advantage of the capabilities of the time capsule.
Any suggestions ont the best set up given I have multiple devices both iOS, OSX and need relaiable coverage of a 3 story town house.
Thanks!
Tim

Best setup is to bridge the TC.. which I think is how you set it up.
I got the TC to conenct via WAN to LAN on actiontec but i think that may limit my ability to take advantage of the capabilities of the time capsule.
You do miss the guest wireless network and BTMM on the TC itself... but otherwise it is the best for everything else.
Tell us if you need these functions.
To cover a 3 storey town house a single wireless router is not going to be adequate.. if you can place the TC on a different floor to the modem that could be very helpful, with ethernet to link the two.
Otherwise you need an Express or two so the coverage can be extended.

DNS loopback for Netgear DEVG2020 router

Recently our router replaced with Netgear Devg2020 and we are having problem of DNS loopback not working issue. We have a Webserver with domain, au.accedo.tv, in internal network ie. 192.168.0.100 that cannot be access from LAN. We had no problem of this when we use Cisco router. Is there a way to set DNS loopback enable that local network users can access to web server with domain name? We need that because of vhosts need to be connected from local devices.

We have the same problem - firmware version VER_06.02.5 I would like to know if anyone at Telstra is reading this (or even cares) as this has been an issue for more than 6 months now, or if anything can be done, I have tried support, they can't help, they put me on to the Premium support (paid). Why should I have to pay to have an issue fixed that was not there before this new router was installed? We have security cameras, remote desktop, ftp servers, all which we could access via the WAN IP address from within the LAN (NAT Loopback/Reflection) using our old Netgear DGN1000 ADSL router. We now have the DEVG2020 Netgear router supplied as part of the Digital Office Technology system from Telstra, since this upgrade, NAT loopback no longer works, nor does FTP from one LAN client to another (to solve this issue I moved FTP to port 2121). All cameras, remote desktops, ftp servers can be accessed from a network outside the office (via the WAN address), but to access from inside the office, we have to change to the 192.168.0.X addresses to access the servers. At home, I have Optus cable, and their Netgear router interface looks almost identical to the Telstra Netgear DEVG2020, except that on the Optus modem, NAT loopback works perfectly, as does internal FTP connections across the LAN. Please provide a fix for this firmware which will: 1. Allow NAT loopback to be enabled/disabled (or simply make it work!)2. Allow FTP (standard port 21) to work properly from a LAN client to another LAN client. (yes I did try to tick the FTP box in Security -> ALG) Trent.

New router - how to change wifi settings for Photosmart B109n

I got a new router. How do I change the wifi settings for my Photosmart B109n? I changed the PC wifi settings (no problem). I connected the PC (Windows 7) to the printer by USB cable. In the HP Solutions Centre, when I click on Settings / Network Settings, it tries to open a browser (IE9) page, with the URL being the IP address (192.168.2.3), but it goes to the "cannot display" page. Do I need the HP software CD? (I think I've lost it.) The manual explains how to set up (using the CD), but I can't find how to change settings for a new router.

Glad to see that you have everything solved. If you run into any other problems, feel free to ask.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How to for HP CP1525nw Apple AirPrint and Netgear WNDR3700 router

How to setup AirPrint on an iPhone & iPad with a HP CP1525nw and Netgear WNDR3700 router
Date written: April 17, 2011
I did this twice. It took 2 days the first time and 3 hours the second time.
Equipment used:
iPhone 4 on AT&T
iPad 2 on Verizon
HP LaserJet CP1525nw color laser
Netgear N600 Wireless Dual Band Gigabit Router WNR3700 v2
Abstract: Upgrade Apple products software, upgrade router firmware, upgrade HP Printer firmware and installer. In that order. Reboot a lot. Test as you go.
APPLE - Upgrade iTunes to the latest version 10.2.1.1 Released around mid April, 2011.
This will Upgrade iPhone 4 to version 4.3.2 (AT&T) Check in Settings under About.
This will Upgrade iPad 2 to version 4.3.2 (Verizon) Check in Settings under About.
NETGEAR - Upgrade the Netgear 3700 router from version 1.0.0.6 to version 1.0.0.8 using the built in webpage to check for updates. The router will download and install the updates. This will also update the built in Web setup GUI from 1.0.0.56 to 1.0.0.67. Power off and on the router. To see your version, check Status under Maintenance
Now is a good time to setup Wireless security in the router. Set to WPA PSK (TKIP) + WPA2-PSK (AES). Uncheck Enable Wireless Isolation.
Enter a password for both bands 2.4 GHz and 5.0 GHz, I used the same for both. (the iPad can use the 5 GHz WiFi band but not for printing {?} so use 2.4 GHz when you print.) You should give them different SSID names, like NETHOME and NETHOME-5. These will show up on your wireless devices (like the iPad but not iPhone)
Make sure your computer, iPhone and iPad can connect to the internet before you go on.
HP PRINTER – Go to HP’s website and down load the latest Installer and firmware for the CP1525nw.
Printer webpage
This is the webpage but you can just search for CP1525nw at the HP website.
Select your Operating System, such as Win 7 32 bit. And look at the list of downloads that appear below. Under Drivers (2), you want to download the HP LaserJet Full Feature Software and Driver. It says it is version 2.0 The Installer you will use is version 3.0.3.5253 as you will see. The Installer on the CD is much older (1.4).
Now under Firmware (1) download the newest firmware utility for the printer. HP LaserJet Firmware Update Utility. The file name is CP1525_Series_FW_Update-20101125.exe [1/1, 6.87M]
Note the date is 20101125. My Printer had 20100430. These are the firmware version numbers.
So 2 programs from HP. One is the Installer and the other is the Firmware Updater. You can just click on the HP Full Feature Installer to run it. No CD needed anymore. You have to get the printer working on the USB port next, and then you can update the firmware in the printer.
You should uninstall any old drivers if it asks you. You are going to uninstall and reinstall 2 or more times. Uninstall old stuff, install new USB drivers from the new download, uninstall USB drivers, and install Wireless drivers. But first get the USB working and printing. Print Config from the printer control menu to see your firmware version…. Reports/Config Report. Look at Firmware Date.
Now you can double click the 2nd HP program to upgrade the Printer firmware. The file is called CP1525_Series_FW_Update-20101125.exe This will upgrade the firmware over the USB port. When it is done you will get a yellow Happy Face. You can print Config Report from the printer controls to see the firmware version… 20101125.
Power off/on Printer. Turn off cell phones, go into Airplane mode on the iPhone and iPad. You can turn on the iPhone and iPad WiFi but leave the 3G phone stuff off. This seems to be important, I think some of the “not found” problems are RF interference with the WiFi.
Run HP Installer again. Uninstall the USB driver and then run it again to install the printer as a Wireless Device. You will need to pick the router and enter the password so the printer can log on to the router.
Once you reboot the printer, check for the blue light on the front. Make sure the Wireless is turned on in the Printer Wireless settings.
Your iPad and iPhone will go through the Router and back out to the Printer to print. Uninstall Print n Share, Print Pro and other printing helpers. (for now) Try printing now. It doesn’t work with Notes, so try printing in Safari with the BoxArrow icon.
The first time you print, you should see the Printer in list, but I had to get out of the app and get back in to Print the first time. After that is works with the CP1525nw without picking the printer again. You will see a big print button.
We so excited…. AirPrint works. (Needs some printer settings…landscape?)
Disclaimer – I don’t work for Apple, HP, Netgear, AT&T or Verizon. I work for free… I would be willing to beta test for them, they need help.

My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

IChat AV 3.0.1 Set-Up For Netgear RP614 v2 router

I have been having constant intermittent problems with iChatAV 3.0.1 (OS 10.4.2) on my PB G4. The error I get is "Insufficient Bandwith" when I try to connect with a PC (using Trillian Pro) or MAC (using iChatAV). I have the cable modem plugged into the Netgear. I then plug a PC, X-Box, Laser printer and an Airport Extreme (configured as a remote repeater) into the Netgear. I use the Airport Extreme wirelessly with my PB G4 17" and an Airport Express in my stereo for iTunes. The Netgear was configured to have all blocking turned off, manually set IP addresses for all computers and X-Box. And the UPnP enabled along with the maximum open port settings for iChatAV (TCP & UDP @ 1024-65535) for use with AOL/Trillian programs. If anyone has the Netgear RP614 v2 router working perfectly with the iChatAV 3.0.1, please post the settings ASAP. I talked with Apple service yesterday and they illuted that they have a problem with the bandwith errors. They said they are working on it !

HI John,
From this page http://portforward.com/english/routers/port_forwarding/Netgear/RP614/default.htm I can see that you must have a newer firmware then the pics show as UPnP is not on there.
Static Addreses do seem to do better in some cases.
The PC applications should be able to use UPnP but I am not sure about the X-Box.
You should not need to port forward all ports and do UPnP at the same time. I would turn off the Port Forwarding you have and use it only for the X-Box, if needed, on the ports it needs.
The error mesages and Connection Doctor details are not as good in iChat 3 as they were in iChat 2 (and those took some working out).
Ralph

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

Settings for Parellel sequence in routing

Pl. tell me hoe to do settings for Parellel sequence in routing , if there are 4 opn s , 10, 20 ,30, 40 .
10,20,40 are in standard seq. , but 30 is in parellel with 20.
pl. revert.
Regards,
RM

Hi,
In your standard sequence, create operations 10, 20 & 40 as per normal.
Now click on Sequence icon (Ctrl + F5), then click on new & in the pop up box select parallel operation.
In the popup box give a meaningul description, give the branch & return operation as 0020. Now a parallel sequence is created, double click on this one & add the operation 30 in this.
You can go to the graphical view & check if it as per your need.
Hope the above solves the issue.
Regards,
Vivek

Wireless router settings for apple tv

There is any special configuration for the wireless router in order to get the Apple tv working good?
Thanks!

Matthew, so long as you translate your (non-square video) material to a square pixel ratio - say, 960x720 - the tv will pillarbox 4:3 content for a 16:9 display. You'll also be able to reallocate valuable bits because you won't have to encode the larger frame 1280x720 frame.
h.264 is progressive-scan only, so, yeah, all material must be deinterlaced during encoding.
As far as workflows, other than dropping the pillarboxing, I'm not sure there is much more that you can do - Frame Controls with Compressor to output an .mov (keeping your bitrate at 5MB/sec) is about all you can do for HD stuff. Even Compressor 3 Apple TV setting is surprisingly spartan.
Hopefully Brian Gary will chime in as well...

How do I use a netgear N600 router with Infinity 1

I have searched various forums etc. with mixed success so am hoping that someone here can give me an idiot's guide to connecting to the internet using my netgear N600 router rather than using the BT Homehub 5. BT say that I can do it (despite my router being set up for ADSL and the HH5 being set up for VDSL) but that they can't tell me how! They sent me an email with various details I would need but I can't see where most of them need to be added when I connect to the netgear set up wizard. What I could see I filled in but when I tried to connect the netgear genie told me the ADSL cable wasn't connected. Can anyone give me a step by step guide of what to do please? I would be very grateful. Thanks

nicolawatt wrote:
I just have the homehub 5 - I have seen various complicated descriptions elsewhere explaining how to use the HH5 as just a modem or how to just connect directly with the Netgear but all have been a bit over my head!
The HH5 cannot be used as a stand alone modem. You could use the Netgear as a simple wireless access point, but you would lose most of the functions, and would be better off using a proper wireless access point.
You cannot use the Netgear as a router, without a modem.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Netgear wireless router won't connect to my HP Pavilion via ethernet cable

I had bought the Netgear LT wireless router for my home and I cannot get my Pavilion PC to connect via the ethernet cable. All of our tablets will connect wirelessly as well as my laptop. The laptop will also connect using the ethernet cable. I had used a wireless broadband card on my PC for that last several years without a problem, now I can't seem to connect to the internet with this new tool. When I do try to connect, a pop-up screen appears with suggestions of using the connections from the past (ie. dial-up, broadband, mobil), but does not show an option for this new router.
Someone had suggest that I may need to get an updated driver for the ehternet card, and if so, how to I get said updated driver to instal over to my PC without being connected to the internet? I've tried to reconfigure and add a "new network" connection without any luck and have uninstalled the old programs pertaining to the old connection devices.
As of now, I'm having to download my business materials on my laptop, then transfer the files to the PC via thumb drives. I'm sure I'm just overlooking something rather simple, as it is usually the case for most, I imagine. Can anyone give me another alternative to fix this issue? I plan on leaving the PC connected to the router via ethernet, while using the wireless WiFi for the other devices.
Thank you in advance!!

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance. Additionally, what operating system are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Using Netgear DG834PN router with Airport on Imac with Leopard 10.5.2

Hello,
I recently got an Imac (at christmas) and began connecting wirelessly using a belkin45g with a WEP key, which i have been told does not work correctly with macs.After this router kept disconnecting me, I then decided to change to a netgear dg834pn router, which connected fine at first.
I had to also set up a PC using Vista which connected perfectly, but after i had set up another WEP key for use with both computers, the PC connected perfectly, but the Imac refused to connect, giving me the error message "connection timeout".
I then removed the WEP, but now when i try and connect it still asks me for the WEP key. This was before i updated to 10.5.2, but i still have the same problem. I have to use an ethernet cable to successfully connect. It's a very annoying problem which has caused me to replace the router twice, but to no avail! If anyone has anything that can help me, it would be greatly appreciated.
Sorry if my explanation is confusing!!

Sorry for your frustrations, hopefully it's just a rinky-**** setting and not your router!
1st thing - while you have any connection, you should use Software Update to update to Leopard 10.5.2. if you haven't already done so.
2nd - If you goto Apple Menu > System Preferences > Network you will see a list of your Network "Services." If you are using PPPoE via your DSL Router, then all you need is Built-In Ethernet or Airport to obtain an DHCP IP Address. This sounds like your config right now and it works, but times out.
3rd - While in the Network preferences, I want to show you something: click on Built-in Ethernet once. Then, you will see an Advanced button in the lower-right corner. Click it. Now click the PPP tab and you will see settings. DO NOT change anything - I'm only showing you what I mean by, "Connect automatically when needed, etc." These type of settings should also correspond to your Router.
Translation: What you see here is sorta what you should see in your Router. Make sure your Router doesn't disconnect you after 3 hours, and make sure your connection is "Always On" etc.
Let me know if you keep getting sporatic drops after you attempted these minor things...

AirMac Extreme and Airport Express not working with Netgear N Router?

I've been using an AirMac Extreme (old model) as a wireless router, and Airport Express for it's airtunes functionality (conected to my Hi-Fi).
These used to work fine, and both would show up in my Airport Utility on my Macs.
I've now just upgraded to a 50MG broadband contract, and the engineer gave me a Network router as my old AirMac Extreme couldn't handle that bandwidth.
When I connected my AirMac Extreme to my Netgear router I then got conflicts, sometimes it wouldn't show up, and it really slowed down my wireless signal. As a result the contractor for my broadband recommended I disconnect my Air Mac Extreme from the router. Speeds went up for the internet, but now I can't get my airtunes to work.
What I want to know is can I just use my Netgear to transmit the broadband signal so I get maximum internet speeds, but then have my AirMac Extreme and Airport Express connected so that I can still listen to my itunes wirelessly?
Ideally I'd like this to all be set up so that I could be conected to the internet through the Netgear wirelessly and listen to my itunes through the Airport Express at the same time.
Thanks in advance for any advice.

I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group, I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

Settings for Netgear DM111P router on Broadband......

Similar Messages

Maybe you are looking for