Settings for pdf-output-quality of WebApplication Designer Diagrams

Dear All!
Is it possible to set-up the quality of pdf-output-quality of WebApplication-Designer Diagrams. If we are using 10pt Chars the pdf-Output no longer readable.
thank you for your comments..

Carsten,
I looks like you posted in the wrong Forum.
Greetings,
Ed Wenmakers.

Similar Messages

Please review settings for maximum output quality

I’m looking for the highest possible quality on DVD SP standard definition DVD. My media is approx 25 minutes, 720 X 480 NTSC , 4:3 aspect ratio I’m working with FCP 5.1.4. So far from skimming the forums I would guess the best thing to do is export into compressor using these settings,
Name: MPEG-2 6.2Mbps 2-pass 4:3
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated file size: 1.29 GB
Type: MPEG-2 video elementary stream
Video Encoder
Format: M2V
Width: 720
Height: 480
Pixel aspect ratio: NTSC CCIR 601/DV
Crop: None
Frame rate: 29.97
Frame Controls: Off
Aspect ratio: 4:3
Field dominance: Bottom first
Average data rate: 6.2 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.7 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 15, Structure: IBBP
DVD Studio Pro meta-data enabled
but only import Dolby into the DVDSP project. On the one I just burned I had to drag the audio to both A1 and A2 on the track should I have to? My real question is this the best way and best settings to maximize the quality of my finished project?

That's the way -- you're doing it. the alternative would be to export a quicktime movie from FCP and drag taht from the finder to Compressor.
The difference is that FCP is busy during encoding with the first option, and you can use fCP while encoding a QT movie. The quality difference comes from the fact that encoding directly from FCP will make use of an uncompressed image buffer that re-processes all your rendered material as uncompressed, which can help to avoid embeddeing DV compression artifacts in your source material.
Hope this helps -
Max

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

Enable PDF security for PDF output of reports from Answers

In BI publisher, We have options to enable PDF output security like diable printing, Encryption etc, How do we set such options under Oracle Answers. I would like to enable security control for PDF output for all the reports from Oracle Asnwers.
Hardeep

Not supported.

Problem with PDF output quality

We recently upgraded to CS4 Suite Design premium and i am having problems getting illustrator to print high quality output. I have a file created in illustrator which contains 300dpi tiff images created in photoshop (CMYK colorspace in both photoshop image and illustrator file) when i print this file to pdf everything looks hi-rez except these images. i have attempted adjusting all the obvious settings in the print dialoge box including: Output/Printer Resolution, Graphics/Postscript level, Advanced/overprint and transparency flattener options/custom settings. and nothing has worked. Other things i have noted, is that in the print dialog box the only presets listed are Custom, Default and Default Web/Video/Mobile. I have looked through the online help files and found the info on how to add "High Quality Print" to my adobe pdf presets, however it doesn't work. furthermore i have tried the instructions here: http://help.adobe.com/en_US/Illustrator/14.0/WSA79FA899-BC95-401e-BD44-5B26BC31B369.html where it says to move the files from "Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Application Support\Adobe PDF" however there is no folder called "Application Support" on my system. I have run out of ideas.
The odd thing here, is that i can take the AI file into photoshop, and print a "High Quality Print" from photoshop with no problems, but i'd like to remove this step to speed up my workflow.
I've attached both the high-quality pdf output from photoshop and the low-quality pdf output from illustrator for reference. (look closely at the logo's)

Figured it out myself! yay! (only took my entire moring)
The solution:
Dont print to PDF!
SAVE AS COPY, then select Adobe PDF and click SAVE, this will bring up a dialog box with the options you need (including the "High Quality Print" Adobe PDF Preset)
This was not clear in any of the instructions i read

Can I modify the Export to... iTunes settings for better audio quality and compression?

I am working on some Music Videos to DJ at a party with, I notice that when I export them as .mov files with Final Cut HD Express, they have 320 kbps and 44.100 kHz in the audio compression settings. Once I export them in Quicktime 10.2, using the File / Export to... / iTunes drop down menu, the Second, (ipad, iphone 4, & AppleTV) setting (not using HD, so the Mac and PC tab is not an option.) The final exported file, that plays great in itunes, appletv, ipad, etc. has a reduced quality audio of Bit Rate of 159 kbps (instead of 320 kbps) and Sample Rate of 32.000 kHz (instead of 44.100 kHz). Is there anyway to change these preset settings somehow?
The Formats on the File / Export / menu are even less dinamic?
I also noticed that some of the Music videos I purchased from the itunes store some years ago, have a 256 Kbps and 44.100 kHz setting. Which is better quality than the ones exported from Quicktime 10.
I thought maybe with Quicktime 7 Pro, I could fine tune all the presets, but it got too complicated for me, might this be an option? What would the settings be?
Using Widescreen 853 x 480 at full quality .mov file.
thanks.

I am working on some Music Videos to DJ at a party with, I notice that when I export them as .mov files with Final Cut HD Express, they have 320 kbps and 44.100 kHz in the audio compression settings. Once I export them in Quicktime 10.2, using the File / Export to... / iTunes drop down menu, the Second, (ipad, iphone 4, & AppleTV) setting (not using HD, so the Mac and PC tab is not an option.) The final exported file, that plays great in itunes, appletv, ipad, etc. has a reduced quality audio of Bit Rate of 159 kbps (instead of 320 kbps) and Sample Rate of 32.000 kHz (instead of 44.100 kHz). Is there anyway to change these preset settings somehow?
Your question basically has too facets. The first is the quality of the source audio in terms of sampling rate and data rate. Under normal circumstances you don't want to export the audio using a sample rate or per channel data rate that is lower than your original source if you are trying to maintain the quality as high as possible and, on the other hand, you don't want to use settings greater than the source values since they increase the final file size without improving the quality of the audio.
The second is the workflow. Since you indicate you are using FCE HD for editing, then using QT X to re-export the data seems somewhat redundant. While it has been many, many years since I last used FCE HD, if I remember correctly, you have both "Export QT Movie" and "Export using QT Conversion" options. The first option takes the audio and video format in which you are editing and merely copies the edited data in that format to a new MOV file container. On the other hand, the second option allows you export the edited data format directly to a user selected compression format using user selected options (but does assume the user knows how to best use these options). These are, BTW, the same export options available in QT 7 Pro.
I thought maybe with Quicktime 7 Pro, I could fine tune all the presets, but it got too complicated for me, might this be an option? What would the settings be?
What is so difficult here? If the source is DVD stereo quality (usually 48.0 KHz @ 192 Kbps then set your output for stereo 48.0 KHz @ 192 Kbps. If you wish to save a bit of file space, the you can use 48.0 KHz @ 160 Kbps but that is normally as low as I go. As to setting combinations in QT 7 Pro, once you set the sampling rate, the application becomes cuntextually adaptive and will only allow you to select data rates that are "standards" compliant and non-compliant ones are automatically greyed out. Rendering quality settings are self-explanatory. These are the basics if you are using a preset option like the "Movie to MPEG-4" export option. If using more complex options like the "Movie to QT Movie" option, then you will need to also consider how you plan to use your file to select the correct encoding strategy. For instance, a constant bit rate is good for optical media from the standpoint of providing a constant flow of data to the player. Unfortunately, this is not very efficient since it forces the quality to vary as it maintains the constant data rate. A variable but contarined data rate is also good for optical media or fast start online files but allows the data rate to vary between user selected data rate excursions and thus provides improved quality over the constant data rate strategy. The variable data rate allows the user to target a specific level of audio quality and will then allow the data rate to vary as needed to maintain a constant level of quality. This option is better suited for playback on a computer since the bit rate can vary greatly in magnitude. The average setting allows the user to target a specific average target data rate but allows it fluctuate as the encoder applies predictor-corrector adjustments. This option, like the constant data rate option, is good for average complexity content when creating a target file of predictable size but can somtimes have problems towards the end of the file if the content suddenly becomes more complex than predicted.
Using Widescreen 853 x 480 at full quality .mov file.
I would rarely recommend using the full quality slider setting. This is more of a redundancy setting forcing the encoder to recycle through certain encoding routines in an effort to improve quality without increasing the data rate. You would like do better to increase the video data rate limit and decrease the quality slider to something in the 50 to 80% range. You also indicate the files are 853x480. Such files are frequently the result of anamorphic widescreen MPEG-2 or DV source files. If so, I would normally recommend retaining this anamorphic strategy by encoding the H.264 video at the same 720x480 matrix dimensions and allowing the player to properly display the files at their targeted aspect ratio. This strategy will either allow for slightly better quality at the current video data rate setting or allow the user to retain the current level of quality using a slightly lower data rate which, in turn, means a slightly smaller final file size.

Loss in pdf output quality

Hello
I have just 'upgraded' my computer. I used to work on XP, now I'm on W7.
When I create a pdf the quality of eps and png files is greatly reduced in quality.
This applies if I use Adobe pdf or cute pdf.
I have attached a file:

Error7103 wrote:
Vector EPS or raster EPS?
Rendering directly to PDF, or to PS then Distilling?
What settings for PS/PDF printing? (esp resolution & down-sampling)?
What settings for Distilling?
Doing any Acrobat post-processing? (optimizing?)
ps - I don't see any difference. Did you post both?
Error7103, you are a true God of this forum.
Distilling it did the trick.
Funny how I didn't figure this out on my own, but that's the problem with being a one man department I suppose.

Best Compostion Settings for DVD output

I am working on a project that does involve some regular DV footage but the vast majority of the footage will be animation movs exported from After Effects. These movies are simply pans and zooms on still photos done in After Effects.
What I'm wondering is what sequence settings I should use.
The final output will be to DVD and it will be viewed mainly on TVs, not computers.
One thing I hate is when I do these still pics and on a TV they look jittery or shimmery or alias-y or whatever it's called.
Is there some way to avoid this?
Is it possible to do a movie in progressive scan even though some of the footage is DV?
How about when exporting from AE? Should I use the DV setting or the progressive setting?
Any thoughts will be very helpful.
Thanks,
S

David,
Your answer "Depends on what is causing the problem. Could be one of (or a combination of) many things; resolution too high, areas of fine detail in the image, poor scan, dimpled/textured photo paper, patterns within the image, areas of high contrast within the image, etc. Each of these problems needs to be addressed individually for each photo." intrigues me.
We are scanning the photos as high res (3000x2000 in some cases) TIF files to allow for panning and zooming. They are B+W and do often have high contrast. They also often have areas of fine detail. I don't think poor scanning or dimpled paper are issues.
Could you offer any ideas on how to fix these images for TV viewing? I will say that I have read other posts on here about using deinterlace, flicker filter, etc and I am never pleased with the way the image is degraded with these filters.
The best I have found is to use a slight blur. On this forum people often say less than .5 pixels but that is never enough to eliminate the flicker, shimmer, what-have-you. I am often forced to use a gaussian blur of 1 to 1.5 pixels.
What I don't like about this is how it then looks on a computer monitor (should people pop the DVD into watch on their home computer). On a TV the images generally look fine.
Any ideas?
Do you think just sticking with regular NTSC DV sequence settings is appropriate?
What about sequence settings for video processing? Would it help at all to use "high quality YUV" rather than "8 bit YUV" since these are animation movies of still pics?
Thanks for the help,
S

Book - best settings for best photo quality

What are the best settings for my photos in order to get the best quality book?
Thanks
Zasa

zasa:
Use the largest file, pixel wise, that you can. The books are printed at 300 dpi so the largest size the better to insure you'll get as close to that dpi for the largest page picture possible.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Offset printing settings for PDF/X-3:2002

Can anybody advice me the best settings of PDF/X for offset printing?
Thanks in advance

The PDF/X-1a:2001 and PDF/X-3:2002 standards are based on PDF 1.3 .... settings, to print the PDF/X directly.
minikperi
yuju
glitter

Want the table for PDF outputs in AR

Hi all,
I want the table which stores all the prdf output paths. In general 'fnd_conc_req_outputs' table stores all the details of the path of specific concurrent request. But for my case concurrent request id is not presented in this table.
To be specific, In AR if i run the 'Statement Generation Program', am able to see the pdf output from front end when i click the 'View Ouput' button. But i want the table which stores this pdf path of Unix box, so that i can get the pdf output from Unix box and place in some other directory.
For example, if we query the fnd_conc_req_outputs table, it will give the file path as '/u01/oracle/qa2comn/admin/out/QA2_bn-orclqaapp01/NUAN_RAXINV_XML_BELGIUM_7433550_1.PDF'.
Please help in this regard as soon as possible because it very much urgent for me.
Many thanks in advance.
Thank you
Kiran

Hi Octavio,
Most of my reports are showing path in the fnd_conc_req_outputs. But this report i am unable to see.Can you try this report once and see whether you are geting entry in that table.
To run this report
Go to Receivables User-->Print Documents-->Statements
Enter option as 'Print Statements', Bucket as 'Statement', Cycle as 'Monthly' and press submit. It autometically spawns the 'Statement Generation Program'.
But it takes some time to complete it and try in test instance only.
Thanks
Kiran

Optimal Settings for Podcast Output

I'm experienced with the editing and output rendering for DVD settings for Encore CS2 and .wmv for our on-demand video hosting server. We have a request for our medical education videos to output for podcast distribution.
Other than the obvious "ideal" presentation tips of keeping any recorded powerpoint fonts and graphics as large as possible, what's the output workflow needed?
Thanks
Gil

We have a 2.4Ghz MBP with the 256 MB video card.
We have 4 GBs of RAM, which you should consider.
However, without indicating what codec and cam you will be using, there isn't much more to say.
If you are working with a DV or HDV camcorder, for example, use an ExpressCard 34 FW or eSATA card and an external HDD for media.
That creates independent FW buses if you go that route or a FW bus and a eSATA HDD connection.

Settings for GR Output as Email

Hi Guys,
We are implementing MM-SUS scenario. Our ECC system (ECC 5.0 -SAPKH50008) is integrated with SRM 5.0. In our scenario, a vendor sends ASN from SUS system via EDI. ASN gets updated in ECC PO as an Inbound Delivery. Further, GR is manually posted in ECC with reference to this Inbound Delivery document. Our requirement is to have the ECC system send an email to the vendor every time a GR is posted for an inbound delivery.
I have maintained the following settings in ECC SPRO
1.Executed program u2018RM07NCUSu2019.
2.I created a Z output type by copying the standard output type MLGR.
3.In the output type, transmission medium is maintained a u2018Simple Mailu2019; Partner Function as u2018VNu2019; Dispatch Time as u2018Send   Immediatelyu2019. I also maintained the Partner Function as u2018MPu2019 and u2018VNu2019 for this output type.
4.This Z Output type is maintained in u2018Maintain Output determination procudureu2019 under procedure u2018ME0001u2019.
5.Lastly, I maintained condition record for this Output type. Here, the system does not allow me to add the vendor number a Partner. Hence for testing purpose I have added a user id.
However, the system doesnu2019t trigger an output message when I post a GR in ECC. Please let me know how to setup this requirement. Any guidance would be highly appreciated.
Thanks
SKN

Hi Ramesh,
Thanks for the helpful suggestions (Points Awarded!)
Now, the system is trying to trigger an email. When I post a GR, system generates a GR number and the next moment I get an error message - 'Update was terminated'. I can see an outbound message in my SAP Inbox. Surprising, no GR document is created in the system with that generated number.
This is the error message in the SAP Inbox
Update was terminated
User.....   A0012
Transaction..   MIGO
Update key...   4A54D04242452853E1000000AC1401C5
Generated....   08.07.2009, 16:07:46
Completed....   08.07.2009, 16:07:48
Here, A0012 is my SAP user id. The sender and recipient is my SAP user ID. As mentioned in your previous post, I think maintaining NDR parameter in my user attributes would make this email trigger feature specific to my user whereas my requirement is to have a email triggered for all user id. Will it involve development work for the system to fetch email Id of the vendor maintained in MN21?
Thanks,
SKN

Best project settings for multiple outputs

Hi guys,
I have a project that will be needed to be outputted to many different formats (web, hd, sd, flash etc).
What's the best settings for a project of this type... obviously the highest common denominator... but your suggestions would be appreciated.
PS... I'm is Australia (PAL), and the project will only be displayed in Australia.

You got it - highest resolution requirement. Then use Compressor to create the lower rez versions from your exported Quicktime.
Patrick

How To use Arial (Cyrillic) font in Reports 10g for PDF output

Hi,
My reports are in Arial (Cyrillic) font, but there are only hieroglyphes in pdf output. Is there a problem with fonts on Report Server or something else?
My Report Server is 10g R2 (10.1.2.2) and OS is RHEL 4.
I followed metalink notes 750805.1 and 356221.1 but it didn't help me.

You also have to be careful with fonts. The font you download may be the same name, but a different font. Just because you find a Zurich BT font, does not mean it is the same. If you search on the internet, there are several sources of some Zurich BT fonts free. However, they may or may not be the same font. Editing is best done on the original document and not the PDF. One of the PDFs I found on the Landis site was only in Zurich font. I would think that the original file is available from the company and that should be the document you edit, not the PDF. It appears the original was created in InDesign (CS3).

Settings for pdf-output-quality of WebApplication Designer Diagrams

Similar Messages

Maybe you are looking for