Settings for Quality Certificates generation

Hello All,
I am a new entrant in the forum. I need your help on quality certificates.
What are the settings necessary for generating Quality certificates in SAP?
Sravan

Hi,
For quality Certificate
In material master QM view Should have to assgn the QM Control Key which controls the Certification and also assign the certificate Type.
Create Certificate profile (Tcode QC01),
Here For which Inspection type you want to create the certificate assign the Origin and type of inspection.
Assign the layout set (with ABAP er's help Required form to be created and assign the name here)
By default QM_QCERT_01
After creation of profile assign this profile to material/materialand customer com bi
Regrds
Praveen

Similar Messages

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

RFC Destination for Quality Certificates

We are setting up QM and one step is to save quality certificates from suppliers. The problem is we get error "OA009 Storage system not known" on trans QC51, it seems because we do not have defined the Content Repositiry on trns OAC0.
SAP has predefined values for quality certificates:
ObjectType: BUS2117
Doc. Type: QMICERTPDF
Cont. Rep. ID: D3
Link: TOA01
My problem is that when I try to create content repository D3 in trans OAC0 it has a requiered field: RFC destination, which I assume is where the data will be stored, anyone knows which one should I choose?
Edited by: Carlos Salazar on Apr 16, 2010 8:03 PM
Edited by: Carlos Salazar on Apr 16, 2010 8:04 PM

Match code shows these options (on DEV 030):
Destino RFC
BACK
CALLTP_WindowsNT
CONEXION A QAS
DEV
DOCUMENTATION_HELP
EU_SCRP_TEST
EU_SCRP_WN32
F1_HELP_SERVER
F1_HELP_SERVER_32
F1_HELP_SERVER_40
GFW_ITS_RFC_DEST
IGS_RFC_DEST
LOCAL_EXEC
LOCAL_PRINT
MDX PARSER
MSSQL_CFGCK
MSSQL_CFGCK_REG
NONE
NONE_NU
QAS_DEV_DEV_00
R3_WINDOWS_SERVER
RECORDER
RECORDER_NU
SAP_INTERNET_GATEWAY
SAP_KEN_IOE
SAP_SCHEDULE_16
SAP_SCHEDULE_32
SAP_SSFATAS
SAP_SSFATGUI
SAPBC
SAPFORMS
SAPFTP
SAPFTPA
SAPGUI
SAPGUI_QUEUE
SAPHTTPA
SAPIRCONTROLLER
SAPIRPCFILETRANSFER
SAPJ2EE
SAPNET_RFC
SAPNET_RTCC
SAPOSS
SDCC_OSS
SERVER_EXEC
SLD_NUC
SLD_UC
TMSADM @ DEV.DOMAIN_SOL
TMSADM @ PRD.DOMAIN_SOL
TMSADM @ QAS.DOMAIN_SOL
TMSADM @ SOL.DOMAIN_SOL
TMSSUP @ DEV.DOMAIN_SOL
TMSSUP @ PRD.DOMAIN_SOL
TMSSUP @ QAS.DOMAIN_SOL
TMSSUP @ SOL.DOMAIN_SOL
VFOLDER
WORKFLOW_LOCAL_030

H264 - Can anyone beat these settings for quality ?

I am preparing a couple of projects for the web.
My task is to get my exported MOVs to the web guy in the best quality and then he can work with them and convert them to FLV.
I am using H264 (settings below).
Can anyone confirm that these settings are the best possible to use to get the highest quality, or suggest something else?
File Extension: mov
Estimated file size: unknown
Audio Encoder
IMA 4:1, Stereo (L R), 48.000 kHz
Video Encoder
Format: QT
Width: 720
Height: 480
Pixel aspect ratio: NTSC CCIR 601/DV
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls On:
Retiming: (Better) Motion Compensated
Resize Filter: Linear Filter
Deinterlace Filter: Better (Motion Adaptive)
Adaptive Details: On
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 100
Min. Spatial quality: 25
Key frame interval: 24
Temporal quality: 50
Min. temporal quality: 25

Looks pretty good to me. Have you read this article before? http://www.apple.com/quicktime/tutorials/h264.html
You know Flash Player 9 supports H.264? No need to re-encode to flv, if you can avoid it. Depends if you want to support earlier versions of Flash Player.
I would strongly recommend doing some short tests before you start encoding everything. It will save you a lot of time doing some short 10-20 second tests (just set in/out points in the Compressor Preview window). I would maybe try setting the keyframe rate to Automatic too.
I see you have frame controls activated. If you would like to save time, you could try this tip (same principle): http://discussions.apple.com/message.jspa?messageID=7309534#7309534
Web compression is all about testing to find the optimal settings for best possible quality/filesize ratio.
If you want the final result to end up as the best quality flv file, I would recommend encoding directly from your source to flv. Going through a heavily compressed long-GOP format like H.264, before encoding to an other heavily compressed format is not a good idea. You would want your video to go through as few generations as possible to maintain quality.

Table for Quality certificates

Hi QM Guys,
Can anybody tell me what is the table name in which quality certificate is stored?
I am searching particularly for certificate number.
S Dey

Quality Certificates QCPR QM quality certificates in procurement
Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types

Impossible to save settings for CIM Client Generation (in Visual Admin)

Hi to all!
I have next problem: the error 'Failed to set permissions for domain' appears when 'Save' button is pressed in Visual Administrator tool in 'SLD Data Supplier -> CIM Client Generation Settings' tab.
I have administrative rights in Visual Admninistrator.
What I need to do to save my settings?
It's needed for estabilish connection between the J2EE AS and SLD service.
This step required for using RFC adaptive model in Web Dynpro applications (for access to R/3 & functional models calling).
Help me to resolve this issue,
Thanx!

Hi,
ensure that you have gone through the following steps
1)Go to : http://<host>:<port>/sld
login as administrator
2)Click on administration and it will take you to SLD server
3)choose Start server and when the server is up choose stop server
4)Go to server settings and make the entries for object server(localhost) and the working directory
5)Choose database persistance and enter the relevent info for the ABAP system and choose 'set'
6)Start data supplier bridge.Start SLD server also .Then go for importing the CIM instances
Hope this helps you.Please dont forget to give points if it really helps.
Regards,
Rohit

Best settings for quality/size trade-off when exporting to QT?

Hi All,
I've been using Keynote '09 (5.3) to record narrated slide shows (slides with me narrating by voice) for my online class "lecture" podcast series for a while - now that the beloved, but quirky and unsupported, ProfCast has fallen by the wayside. This works well - as we all know - producing clear audio and visuals that upload well to YouTube, where I am now hosting the files.
The problem I'm running into now is that my lectures often last around 50 minutes, and this produces enormous file sizes (like the original Keynote file comes in around 800MB with the slideshow saved). I've been exporting to Quicktime with full size video and mixed audio set to AAC, and this produces a QT mov of around 130MB or so. Still quite large, but at least manageable for uploading, even with DSL at home.
Ideally, though, I'd have even smaller mov files, but without much loss in quality. In my earlier experimentation, I realized that it was the audio that was eating up loads of space. However, switching to half size video cuts the same file to around 80MB as well. Once I've opened the can of worms of custom audio and video settings, I feel like there are many, many possible combinations of sizes and qualities...and it's difficult to steadily compare each and every permuationg (it takes a while for each export to run!).
So, the question I have is: are any of the other AAC settings in the menu likely to make a significant dent in mov file size? Or, are these really just small differences on the margin? Even if I stay with AAC overall, would tweaking the kHz Rate make much of a difference?
Looking forward to any wisdom from experience you all might have to pass along!

I was looking for command-line PDF conversion tools and eventually found out this:
https://www.pdf-tools.com/pdf/pdf-optimization-reduce-size-1.aspx
To me, it is way too pricey (US$ 570), but maybe it's a viable solution to you. It has watched folder workflows, therefore it can be handy for your purposes. You can download a demo and even test it online (the resulting PDF is watermarked).
I submitted a file to their online testing page and were impressed with the results: a 1.5 Mb original PDF resulted in a 925 Kb file (while an Acrobat "optimized" file ot the same sample PDF turned out to be _bigger_ then the original). What makes it even more impressive: in the online test I deselected ALL the image downsampling settings, to force the optimized PDF to keep the original image quality and resolution. Then, in Acrobat, I exported the images from both the original PDF and the optimized one, and compare them in Photoshop. They were not identical, but the difference is pratically imperceptible. I guess that applying downsampling to the test will result in even smaller PDFs, but I didn't test this.
Anyway... I don't have any affiliation with those guys, and I don't have either the need nor the money to buy this product. I'm only sharing these thoughts because they may point you to other ways to find a solution. The above mentioned application seems to be very efficient. If you can afford it, then I think it deserves a try. If not, you can search the Web for plugins or other tools that can fit you needs and budget. Acrobat/InDesign approaches are not the only way to go.

Re: Quality Certificate requirement At MIGO for raw material

Dear all,
I have a requirement where I want the system ask for Quality certificate while doing the goods receipt. The system should not allow me to process the transaction-MIGO if certificate is not recieved.
Please advice
Regards,
Vivek Sharma

Hi Vivek,
You need to perform following settings.
Configuration
Follow the path
Run trx QCC0->QM in Logistics->QM in Procurement-->Define Control Keys.
Here create your own control key
Where you can set the rest data as per your requirement but for to check the check box for "Cert Required" is must be activated to meet the requirement relevant to this thread.
Save
Say you have configured your Control Key ZZ01
Now just below this one small configuration is mandatory is Run trx QCC0->QM in Logistics->QM in Procurement-->Define Keys for Certificate Processing
Maintain Description
Execute it and go to "Define Certificate Types"
Here either for your relevant certification type or for new type (if you wish to create new), maintain the data as below
"Certificate Required for Each Purchase Order Item" ==== Active
"Certif. per GR Item" ==== Active
"Certif. check required" ==== Active
"Control W/O Certif." Set any error message, I would suggest to select "Without lot error message, with lot error message"
"Enhanced cert. processing" ==== Don't Activate
"No certif. confirmation at GR" ==== Don't Activate
The rest settings are not important to maintain so leave them blank.
At Master Level
In QM view of MM for the material maintain "QM Control Key" that just created "ZZ01"
and the certificate type that is just created or amended. under the procurement data.
Maintain Q-Info record for Material - Vendor - Plant combination (QI01)
Now as per your requirement system will ask for the confirmation for certificate receipt as Yes/No. under the Purchase Order data in MIGO at item level data.
If you select "NO" to it it will not allow to post the GR.
I hope this is what you were looking for.
Regards,
Shyamal

Quality Certificate for Delivery

Hi,
Please guide the basic steps required for Creation of Qulaity Certificate at the time of deilvery with there customization details ?

Hi !
There are 4 basic steps for quality certificate:
1. Create form in SE71.
2. Create certificate profile in QC01
3. Release certificate profile in QC01
4. assign certificate( mateial, material group or combination of materia-customer in QC15)
You can study in details in Link:[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMCA/QMCA.pdf]
Go through the steps in IDES first, in case any clarification needed do write back.
Edited by: Swarnali_D on May 21, 2010 11:01 AM

Quality certificate issue

Hi
could u Pls ... tell me about quality certficate procedure for incomeing and outgoing?
pls guide to me step by step
regards
sesidhar

hi
incoming certificate,
you have to maintained setting in material master in quality view screen in procurement and create certificate profile.
and following settingis for outgoing certificate.
1) you have to maintained certificate profile determination in spro and output determination in spro first.
2) you have to create certificate profile by t code QC01 and assigned inspection characteristics there. that you want to view on certificate. and give output form there.
3) assigned that certificate profile to your material or material/ customer in QC15. for condition QCA1
4) maintained customer info record for out put determination in VV11 for LQCA condition.
when you go for delivery you can see into out that LQCA outout
Regards
Pravin

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Quality certificate - Delivery ,Inspection lot

Dear guys,
Hope every one is doing well
Here is my question, this is the first time i am working on Quality certificates
From sap help came to know that
For Quality certificate for Delivery we need to create a certificate profile , forms that is lay out and contents of the certificate
and we need to assign to material and sales organization or customer
Thats clear for me, but also we need to define the output type as LQCA and LQCB if it is ship to party or sold to party
so i belive that when ever delivery Inspection lot UD is done Quality certifiacte is printed according to certificate profile and output type
i belive that the charactersitics of the inspection lot also printed in the Quality certificate
system gets the information from certificate profile , in the charecteristic assignement
just please someone help me that my understanding is correct
Also i need to know if i want to print Quality certificate for inspection lot how do i set the output type as there is nothing like LQCA,LQCB for inspection lot
please help me what setting i need to do for printing inspection lot Quality certificate
Thanks in advance
Raj

Dear kaushik,
You are great, its just nice and happy to see my first inspection lot print out
thanks a lot
Just another Quick question regarding vendor Quality certificate, there is a requirement that vendor certificates to be scanned and uploaded in sap optical archive link
is there any standard transcation in sap , is there any customization need to done in functional point of view , or i need to work with abaper to create a new transcation code to upload
Throw some lights
Thanks
Raj

Best settings for MPEG Streamclip

Hi all,
Being forced to work off DVD source due to lack of options and want to ensure that I get the best possible results. Am using MPEG Streamclip and did a trial run to convert it into DV, converted the audio to 48khrz.
Picture was real time but audio needed rendering.
Can anyone advise me on the best possible settings for quality and realtime playback?
I'll be deliving in uncompressed quicktime and DVD.
Also, new to FCE and want to know where the best place to store the files I convert? Is this what the Sctatch disk is for?
Thanks in advance for your help, work on a weekend is never fun but you might just be able to help me get to the pub for a bit at least!
Nigel

Tom Wolsky wrote:
You converted to the wrong format. Do not convert to DV. Convert to QuickTime using DV PAL as the compressor. The frame rate is 25fps. The quality slider makes no difference.
You can only work in DV or Apple Intermediate Codec for HD in FCE. You cannot work in uncompressed formats so you're media has to be converted to DV.
I'm doing the same thing, but I'll be needing NTSC. I see in the Export to Quicktime dialog that there is no simple DV NTSC listed. The most promising-looking compression formats appear to be Apple DVCPRO50 - NTSC, Apple DV/DVCPRO - NTSC, Apple Intermediate Codec, Apple FCP Uncompressed 8(or 10)-bit 4:2:2.
Or is it better to use the Export to Other Formats dialog, and select QuickTime?
This is the first time I've used MPEG Streamclip (and I've only recently started using FCE 4), so I'm a little confused. What are the best settings to use for video that will be imported to FCE for NTSC?
Thanks.
-Gordon

Best settings for Flash playback on Website

Hello,
1. Whats the Best Settings for Quality and Fast loading for Video playback of Flash Video??
Website features a :30 Second TV Commercial, takes too long for website to load. any Tips to get it to load FAST but have GREAT Looking Video
Quality.
Thanks a lot
Joe

Best thing is to use the Adobe Media Encoder bundled with Flash CS4. Play with the settings until you get the optimum settings and the import the .flv to the stage. Then publish the movie "best".
James.
http://www.toshiedo.com.au

Error while executing the transaction QC22 (Quality Certificate for Batch)

Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra Chauhan

Hi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

Settings for Quality Certificates generation

Similar Messages

Maybe you are looking for