Settings for SAP Portal start page from BEx Query Designer
Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen
Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM
Similar Messages
-
Unable to run query from BEx query designer
Hello,
I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
but query result isnt shown.
Internet Explorer cannot display the webpage.
What kind of setting do I need to change to get query working?
thanksHi Comandante,
If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX or RSRT transaction for now until the issue with the query designer is solved ..
Hope it helps!
Regards,
Pavan -
Launching BeX Analyzer from BeX Query Designer
Hi,
We are using BeX Frontend version 7.x.
In the Query Designer, when you presss the 'Execute' button, it generally opens the report on the web (calls the portal). Is there any way to change this so that when you press 'Execute', it runs the report on the BeX Analyzer?
Best Regards,
RajibHello...
I regret to inform you, there is no way to do such a thing.
You cannot call via "Query Designer" the "BEx Analyzer".
I don't thing my suggestion is very helpful, but as workaround, you can call via SAPGUI, with transaction RMMX.
I personally suggest you to install and use the BI Java stack, since the BI 7.0 addons was designed to work together with an BI Java Portal.
Thanks...
Best regards,
Edward John -
BEX - Query Designer - Query Execution - IE "The page cannot be displayed'
Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
NiviaHi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia -
BEx Query Designer - Execute pops up blank Internet Explorer session
Hi gurus,
From BEx Query Designer, I choose Execute, and it pops up a blank Internet Explorer window rather than the query. It says about:blank in the URL and the page is white.
I read some posts that say to run RSPOR_SETUP, but I don't have a Java system or Portal system so does that still apply to me? I want the URL that pops up to point to the BW system which is an ABAP system.
E_URL_PREFIX http://BWSAPF00.mydomain.com:8100
E_URL_PATH /sap/bw/BEx
E_URL_PROTOCOL http
E_URL_SERVER BWSAPF00.mydomain.com
E_URL_PORT 8100
E_SUBRC 0
Warm Regards,
CMHi,
Please note that Java stack is mandatory for running Queries in web side
or for executing the Queries using Transaction RSRT -> Java Web or
for executing the Queries using Query Designer in Release 7.x .
So, please install Java stack and use BI Java components for running
Queries in web side here.
Also, please refer the following note for details:
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
Also keep a note of the following:
Please check the following link:
http://help.sap.com/saphelp_nwpi71
/helpdata/en/45/61d5aaa0546628e10000000a1553f6/frameset.htm
"With SAP NetWeaver 7.1, the Visual Administrator (VA) is replaced by
the SAP NetWeaver Administrator, that is, all relevant functions of
the VA are available in the SAP NetWeaver Administrator.
The VA is no longer delivered as of SAP NetWeaver 7.1. "
The interface is a little bit different now, but the installation
steps still follow the same logic as SAP NetWeaver 2004s.
You can use manual steps to set up integration as per note 917950.
Also, please don´t use report RSPOR_SETUP for configuration check
between ABAP and Java for SAP NetWeaver 2004s.
The report has been replaced by the support desk tool.
Please have a look at note '937697 - Usage of
SAP NetWeaver BI Diagnostics & Support Desk Tool'
RSPOR_SETUP is obsolete in BI 7.x release and Supportdesk tool should
be used in 7.x release.
Also refer the following notes:
1512988 - Frequently Asked Questions:BI Java 7.30 SP's/patches
1512356 - Patches for NetWeaver 7.30 BI Java Support Package
1506722 - Generic Note for BI Java Patches and Support Packages
And, please note that Patch Level 0 is not supported for BI Java components as per the following note:
1789842 - Patch Level 0 for BI Java Installation
Please do look at the note 1789842 for details.
Please check the Support Desk Tool as per the note 937697 and if you find
any RED signals in the file systeminfo.txt included in the file
supportdesk.zip, please correct it as per the Solution mentioned
there and check if it helps.
Thanks & Regards,
Sapna
Message was edited by: Sapna J Gurudutt -
Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer
Hello Expert SAP BI,
I Extracting Data from Flat File,
Till then Cube My Transaction data Loaded Perfectly ,
i want to create Report in Bex Analyzer, fetching fields from Bex Query Designer.
Characteristics are showing in Rows , that showing in Report , but in Columns added Key Figure , its not showing in Report .
Can any one Suggest , what will be issue and how i have resolve it.
- Thank you.Datasource -> Transformation -> InfoSource
Infosource -> Transformation -> DSO
DSO -> Transformation -> Cube -
How do I get back to my basic start page from any ...
How do I get back to my basic start page from any other page? There should be a one click link but I can't see how to do it. Apologies for illiteracy. Like say from this help page, how can I get back on skype and make a call?
There is a "Home" button below search option which will take you to the main page.
-
Calling portal framework page from non portal page
Hi,
We are having some difficulty in passing control from the non portal pages to
the Portal Pages.
To explain you more elaborately, I am writing down the scenario:
Both our portal and non portal pages reside under the same web application folder.
We have a Portal Page containing one portlet.Clicking on one of the hyperlink
on this portlet page takes us out of the portal environment where we are doing
some processing.
(Why we are going out of the portal environment is because we want to call the
existing pages as it is and our intention is not to make the existing pages portal
enabled to start with).
Somewhere down the journey on the non portal page, there is a requirement to call
the Portal Framework page.
We can call the portal Framework page from the non portal page by hard coding
the URL of the Portal page by writing something like this in href:
http://localhost:7501/application?origin=content.jsp&event=bea.portal.framework.internal.portlet.event&pageid=home&portletid=bachome_carsearchlink&wfevent=link.next
But this is not what we want. We want to call the portal page without hard coding
the URL.
If we use portlet tag in non portal page to call the Portal Framework page ( <a
href="<portlet:createWebflowURL event="link.next"/>">Next Page</a>), it throws
us error "Could not find current Portlet State" which is quite understandable,
because portlet state is now lost.
Is there any way we can achieve this .
Any suggestions or ideas?
Thanks
AjayHi
i think you should use portal:createPortalPageChangeURL (you are effectively changing
your portal page) .
if you want to invoke a specific event in your portlet webflow you can either
write a RefreshControllerIP or use WebflowJSPHelper.createWebflowURL.
bear in mind if you have urls that directly go to an intermediate event in the
portlets webflow you may need
http://dev2dev.bea.com/codelibrary/code/portlet_pp.jsp
regards
deepak
"Ajay" <[email protected]> wrote:
>
Hi,
We are having some difficulty in passing control from the non portal
pages to
the Portal Pages.
To explain you more elaborately, I am writing down the scenario:
Both our portal and non portal pages reside under the same web application
folder.
We have a Portal Page containing one portlet.Clicking on one of the
hyperlink
on this portlet page takes us out of the portal environment where we
are doing
some processing.
(Why we are going out of the portal environment is because we want to
call the
existing pages as it is and our intention is not to make the existing
pages portal
enabled to start with).
Somewhere down the journey on the non portal page, there is a requirement
to call
the Portal Framework page.
We can call the portal Framework page from the non portal page by hard
coding
the URL of the Portal page by writing something like this in href:
http://localhost:7501/application?origin=content.jsp&event=bea.portal.framework.internal.portlet.event&pageid=home&portletid=bachome_carsearchlink&wfevent=link.next
But this is not what we want. We want to call the portal page without
hard coding
the URL.
If we use portlet tag in non portal page to call the Portal Framework
page ( <a
href="<portlet:createWebflowURL event="link.next"/>">Next Page</a>),
it throws
us error "Could not find current Portlet State" which is quite understandable,
because portlet state is now lost.
Is there any way we can achieve this .
Any suggestions or ideas?
Thanks
Ajay -
# Question
I can't stop the Firefox Start page from opening - in addition to my default page - each time I open FirefoxIs this the Firefox branded Google page? If it is, Firefox can store multiple home pages and you may have 2 home pages set. Follow the instructions to set a single home page in this link - https://support.mozilla.com/kb/How+to+set+the+home+page
If it is the Firefox has just updated page that keeps on appearing, there may be a different problem, for details on fixing that see https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox -
CSM SLB for SAP portal 5.0
Dear All!
Is there somebody who have experineces with SLB for SAP portal? The main question is : Which sticknies to use: SSL or IP based? How to configure IP based, because I did not find good explanation of "netmask" parameter in sticky,sticky-group command. What happen to sticky connection, when real server fail. Is it rebalanced?
Thanx!
GabrielHi Gabriel,
I do not have experiences with SAP-Portal Loadbalancing but from my experience with loadbalancing I would say that this decision should be done regarding the surrounding environment. If there are proxies around which are used to connected to the loadbalanced VIP I would suggest SSL-Session balancing/stickieness. If clients are directly connecting towards the VIP a client-IP-stickieness might be easiser to troubleshoot.
Regarding the netmask issue:
Unfortunately there is no real documentation (I did not find any so far). I can only tell you the result out of my experience:
A netmask 255.255.255.255 is kind of host stickiness and 255.255.255.0 a stickieness of a /24 network. In other words I think that all Clients with a network of 10.1.1.0/24 are sticked to the decission once taken for one of the hosts in this segment while the sticky timeout did not take place. Maybe one can confirm or correct this.
Regarding the thing with the failure of a real server:
With the corresponding failaction defined in the serverfarm you decide what to do in case of an error of a real server. The stickiness should be corrected correspondig to the results you define with the failaction command.
This is how I dealt with those sticky issue when doing firewall loadbalancing with client-IP-Stickiness.
Hope that helped.
Kind Regards,
Joerg -
Dynamic Text in SAP portal login page
Hi All,
I want to display some text information in the SAP Portal login page.Is it possible to display dynamic text in the login page?
Can anybody help in this?
Regards,
V KarthiCheck the following links as well.
[Customizing Portal Login Page;
[Portal Login Page Customization;
Check all 3 weblogs.
Regards
Puneet -
Business packages for SAP Portal 7.3
Hi,
as far as I know at the moment there are no business packages existing for SAP Portal 7.3. Is this correct? If yes, how are the different business packages scheduled?
Bye,
TimoHi Timo,
with EHP5 you may choose between WD JAVA and WD ABAP.
Just check
http://help.sap.com/erp2005_ehp_06/helpdata/en/48/a2d0be5444690ae1000000
0a42189c/frameset.htm
As soon as you have decided to use one of the versions you may use the Maintenance optimizer to determine the pacakge.
The release of the portal is not so important for the business packages. The NW release is just important if you run the JAVA applications on this machine as well. For NW 7.3 this means
you will need the 633 and 630 packages.
Regards
Shrikant -
Starting BeX Query Designer from Crystal opens older version Designer
Hi,
When starting the BeX Query Designer from Crystal Reports 2008, the older 3.5 version of the designer is started and hence wanting to edit a query that was designed in 2004s raises the error: "This component was edited with a more recent version of the editor. You also have to use the more recent version to edit further. Further processing is not possible. Update your front-end".
The latest version is installed, it seems that Crystal by default opens the 3.5 version that was installed with the 710 GUI and Business Explorer etc ... Is this by design and can one set something somewhere to use the 2004s version via Crystal Reports.
Any insight is welcome.
JacquesHi Jacques,
that is a known issue in the toolbar of Crystal Reports.
You can start the Query Designer 3.5 / 7.0 from the BEx menu item
Ingo -
The textbox for setting a start page is grayed out, and I cannot change the start page.
When I go to Options form, the textbox for "Mozilla Firefox Start page" is grayed out, and unchangeable. If I navigate to a page, then set that as my start page, closing and restarting Firefox reverts back to the Firefox/Google startpage - my home page setting is not being saved.
I have tried resetting Firefox, restarting with add-ons disabled, even deleting and recreating a new profile, but it still does this.Well, I lack the sufficient administrator privileges to uninstall the current install of Firefox, but - oddly enough - not to install a new copy to another folder.
So I installed the software, and viola - it worked!
Thanks! -
Use only Internet Explorer for SAP portal
Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
DenishHi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit
Maybe you are looking for
-
How to recover by recovery dvd if dvd rw not working
I have my recovery DVDs. but my DVD drive is not working properly. In windows dvd can be read very hardly. and while booting from dvd to recover, system fails to read dvd. I have made iso images of dvd. is ther anyway by which i can boot through iso
-
Computer freezes while running Endeca Tools Service
Hello, We are facing a problem while running Endeca Tools Service with Experience Manager (v3.1.2 ) on Windows 7. My computer freezes recurrently while the service is running. The same issue is happening to all of my colleagues who have installed
-
I have bought an iphone 5 and signed up for icloud service to sync my imac. But minimum requirement for icloud is 10.7.5 and my imac is OS X10.6.8. Also the itunes version in my imac is old so cable sync with iphone 5 not working. I am not able to re
-
Installing LR 4 on a new computer
I was sent the link to reinstall LR. I clicked on the link, clicked on LR 4.4.1 it went through "installing", and says that installing is complete. I know have the Lr icon on my desktop. When I click on it Lr 5 box comes up with a icon of a carboar
-
Chromecast has withdrawn support for my MacBook OS X10.6.8
Have used the chromecast since January. Recently has required reinstalling every week or 2. This week, I could not proceed through the setup as the chromecast would not connect with my WIFI network using the procedures that had worked before. Afte