Settings for specific frequencies?

I would like to know if there is a control where I can set a frequency to be played by whatever instrument.... For instance if I need 528 Hz is there a place to set that frequency to be played????
thanks

This won't be exact for frequencies that don't conform to pitches, but if all you have is GB, you could refer to a pitch to frequency map (e.g. http://www.drewdaniels.com/FREQ.pdf ) and play the pitch of the associated frequency. In GB, you could also open up the visual eq, turn on analysis, and confirm (as well as reduce extraneous frequencies).
If you need something more flexible and exact, and don't have another audio program with this capability, google "sine wave generator" and you'll probably find what you need.

Similar Messages

  • Security settings for specific pages

    I originally posted this question in the eBooks forum and was told this might be a better location for an answer. So, if you have seen it there please disregard.
    Question:
    I am developing a line of publications for our company and they want them to be secure from copying but allow them to be able to print specific pages. Is this possible? If so, how?
    Thank you

    Not as far as I know. Any PDF that can be viewed can be printed or copied, either as a screen shot, or by removing the "do not edit" password using free shareware. You can make the text harder to copy and re-use by either converting to outlines, or saving as an image (rasterizing), this will also make it non-searchable. An image can have an embedded watermark, but can still be extracted using edit image. My favorite way to thwart an image thief is to place a white tiff on top of an image (in InDesign) set it to multiply, step and repeat it several times, then when someone tries to grab it from the PDF they get a white image.

  • User specific settings for message ME161

    All SAP Gurus,
    Is it possible to have user specific settings for message like ME161?
    We want the message ME161 to be displayed as warning message to one user and the same message to be displayed as an erorr message to another user.
    Is it possible?
    Regards,

    hi,
    In addition to the above data:
    Messages are defined like this:
    Version     AG      No.      Text     TYPE
    Normally, in std case,
    Version will be always 00 for system defined messages....
    Now if you wanna make the the same message as authorised,
    then copy this exsisting message....
    While copying system will ask for version, here enter it it Z*
    Now on the other hand make the other settings for user/user grp in SU01 and here set the user parameter as MSV(THIS IS MUST)....
    and then try...
    Regards
    Priyanka.P

  • Hide settings icon for specific users

    Hi
    In share point 2013 we have settings icon at top right corner.
    Is there any way, I can hide this icon for specific users.
    Please help in this regard.
    Thanks,
    Anil

    Hi Kumar,
    Its possible.
    1.Open the .master page in some textpad/SP Designer.
    2.Look for below tag. This is the holder for SITE ACTIONS
    <SharePoint:SiteActions
    3.Look for the Menu item templates. These will clearly give you an idea on wht they will hold.
    <SharePoint:MenuItemTemplate
    4.There will be 2 attributes for each menu item called
    PermissionsString & PermissionMode.
    In the permission string give the required permission to the user to be shown or hide.
    http://sharepoint.stackexchange.com/questions/66628/edit-settings-gear-icon
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Shared Memory Settings for Oracle - Machine Spec Specific?

    Hi,
    I've been asked to apply some shared memory settings for Oracle on a new V210. The DBA has asked that we simply copy the settings from one system file to the new machine.
    My problem is that I'm not entirely sure whether this is the best course of action. The machine the settings are taken from is a E280R with 2GB Memory and 2 x 900Mhz processors. The new V210 has 2GB and 2 x 1.33Ghz.
    Surely the memory settings should be different? Don't worry, I've copied the relevant settings - not the whole system file!
    Thanks for any advice,
    John

    Hi John,
    Normally, When you want to apply the shm. We normally for production machines , consider 1/3rd of your physical memory. For eg. If you have 16gb of physical memory, I would consider around 4gb of shm_max.
    Thanks,
    Keshav .N

  • Ideal BIOS Settings for online gaming

    this is my 1st computer that i built. i have a lot of experience in wiring high-end electronics, so wiring this little rig with barely any visible wires/cables was a breeze. I bought the processor/mobo with the intention of only doing minor O/C as i dont really know all that much on the hardware side of improving performance. with that said, i've searched for timings and settings for my specific combination, and i cant find any. again, i dont really want to push the config past a safe level, as i will be selling this machine when the 64's come down in price. can someone help me set the proper frequencies/timings? i have a lot to learn, and even in the normal bios settings i don't know if certain things should be enabled or disabled for my main purpose, which is to simply play 3D online games very  fast. i will be changing out the GeforceFX5200 PCI for a 5600 AGP in a week or so. I'm noticing that my old Comcrap PIII 1.0Ghz w/512SDRAM with this video card gets just as good a ping ingame as this rig does. the machine starts quickly, runs offline programs quickly, but online it isnt as fast as i'd hoped. from what i've read in the other forums, there are many settings in the bios that are enabled by default that don't need to be. can someone help me decipher which settings are useful and which are not. i loosely understand some of the settings but if someone could help with the questions below and/or do a walkthru for bios geared toward gaming i'd really appreciate it. The machine runs very cool (CPU 104*F/SYS 93*F) but i dont know what else needs adjustment. I simply want to make this machine go as fast and as hard as it can with the right config. i don't want to unlock the processor yet or do anything else major at this point.
    1: Best yet safe Voltage for my processor and RAM
    2: FSB clock; 133 or 166? had problems @ 200
    3: S.M.A.R.T. on or off?
    4: Best IRQ/PCI slot for video card
    5: "GoodMEM" utility: how much should i safely allot?
    6: Video BIOS Cacheable?
    7: Multiplier setting for K7N2DeltaL & XP2600+
    8: VGA Aperture (my card is 128MB but PCI. upgrading soon)
    i'll be learning more as i go along, so i dont really need a full explanation of what's what, lol THIS TIME. all i need is a rundown where someone tells me what to leave alone, and what to change for a very fast yet safe gaming rig

    OK I'm officially confused.
    I bought the retail boxed AthlonXP2600+, which clearly states on the packaging "With 333 MHZ Frontside Bus". i bought the board over others, one reason being it supported 400MHz FSB. I go into "Advanced Chipset Features" and when i set the "System Performance" to "Manual", i can then go into the "CPU FSB Clock" settings, but the max it will allow me to go to is 233MHz (which won't boot and i have to flip the jumpers. when i had set it to 200MHz before, it failed to boot as well... PLEASE can someone look over these settings and tell me the OPTIMAL settings for taking this combo as fast as it can go w/o overclocking? What am i doing wrong? what multiplier do i need to be at. I'm under the impression that the combo works best when the clock speed of the board is at the same speed as the processor. here are the  BIOS settings with which i need advice:
    ADV. BIOS
    Virus Warning                                [Disabled]
    External Cache                              [Enabled]
    Quick Boot                                    [Enabled]
    1st Boot                                        [Floppy]
    2nd Boot                                       [HDD]
    3rd Boot                                       [CD]
    Boot Other Device                         [Enabled]
    Swap Floppy                                 [Disabled]
    Seek Floppy                                  [Enabled]
    Boot Up Num Lock LED                   [On]
    Gate A20 Option                            [Fast]
    Typematic Rate Setting                  [Disabled]
    Security Option                             [Setup]
    APIC Function                               [Enabled]
    MPS Table Version                        [1.4]
    BOOT OS/2 for DRAM>64MB          [No]
    HD S.M.A.R.T.                               [Enabled]
    Video BIOS Cacheable                  [Enabled]
    ADV. CHIPSET
    System Performance                    [High Performance]
    CPU FSB Clock                             [166MHz]
    AGP 8x Support                           [Enabled]
    AGP Fastwrite Support                  [Enabled]
    System BIOS Cacheable               [Disabled]
    Video RAM Cacheable                   [Enabled]
    AGP Aperture Size                        [128MB]
    I do currently have a PCI GeForceFX5200 8o, but im getting an AGP FX5600 this week. i know my card has nothing to do with AGP, but i've left most of the AGP settings alone since i'll be using it later. is this creating a bottleneck or tying up system memory to have it this way for now?
    FREQUENCY/VOLTAGE CTRL
    AGP Clock Value [Default]
    xAGP Clock Value [66]
    AGP Voltage Adjust [1.5V]
    DRAM Voltage Adjust [2.7V]
    CPU Ratio [By H/W]
    CPU Vcore Select [By H/W]
    PCI Clock Auto-Detect [Enabled]
    Again, I have an 333MhzFSB Chip and a board that will support up to 400MhzFSB. help!

  • HTML5 MP4 Codec Settings for Safari 5.1.5

    Hello all,
    I am having a problem with HTML4 MP4 h.264 videos in Safari 5.1.5 only running under Lion. Does anyone have any exactly specifications for compressing videos that will play in this version of Safari? Also, if you have sucessfully exported videos for 5.1.5 what software are you using to encode? I have tried several options (After Effects, QT7 etc) and not had any luck. Thank you!

    Getting mp3 music out of your 4 satelite speakers and center channel requires either enabling the X-Fi CMSS 3D Sorround setting in your Audio Console or, alternately, if using your X-Fi card with an external Decoder, you could (if available on your decoder) enable Dolby PLII Music enhancement or X2 Stereo enhancement. I personally prefer the results from enabling CMSS 3D Surround and then adjusting my center channel for an even sound stage. Crystalizer Mode: In general, 24-bit Crystalizer produces crisper high frequencies, punchier mid-range percussion and note onsets, and stronger kick bass hits. I'm not sure that I would use the Crystalizer Mode as a substitute for good EQ settings but perhaps in conjuction would be the best approach. Depending on the 5. speaker system you have, Base Redirect shouldn't have to be used unless your satelite speakers and center channel are playing Bass frequencies that really should be assigned to the Sub-woofer. Some speaker sets and amplifiers have bass redirection feature i.e. you do not need discrete 5. signal to hear the sound on the subwoofer. Such sets always output bass - even if you connect a normal stereo source. Again, however, it is possible that if you have an analogue speaker set that does not support automatic Bass Redirection via the amplifier, then you would have to enable Bass Redirect at the sound card level in order to redirect the lowest frequencies to the subwoofer. I do not have to conduct a Bass Redirection, however, not all systems are equal in terms of functionality. The best settings for a 5. system are really contigent on the room size, speaker type and placement, room wall materials, amplifier type, content played (movies, music, spoken word., etc.) and, listeners personal preference. Personaly I would run the supplied Speaker Calibration utility and when you have the sound you personally enjoy, stick with it. Best advise I can offer to be perfectly honest. Hope this helped.

  • Problem with roaming for specific apps

    Hi :)
    I have a problem with my iPhone 4s:
    When i use roaming on my iPhone 4s i try to save some money by turning off roaming for specific apps, but one day for ca. 3 weeks ago it stopped working!
    Some apps can use roaming but some can't ;(
    There are like 10 apps always turned on, but if i try turning roaming off for an app that is on already it wont work!
    If i close settings and reopen it, the app is now denied using roaming!
    If i try allowing an app it changes but still wont work and after some time it gets in the same possission i cant change!
    I have never experienced this before and i could't find an answer on google ;(
    If you know how to fix it please respond to me here :)
    ~somonekilledme
    P.S: Im really sorry if there are bad english here, but im mot english sooooo..... yeah

    You are on the right track suspecting DHCP conflicts.
    To configure your "roaming network" connect your "slave" Extreme to your main Internet router - either directly or through a switch - and place it in "bridge mode". That will work.
    A router will be distributing IP addresses using DHCP. Anything connected to it should be configured as a bridge, the essential difference being that a bridge does not distribute IP addresses.
    I do not believe your "slave" Extreme will function connected as it is to the "main" Extreme, but may work if you assign it a static IP address. It is not unusual for it to retain this static IP after having been changed to DHCP if its lease is still valid.
    The OK article you referenced must be terribly outdated if it is referring to AirPort Admin Utility. That has not been used in about a decade. Read this one:
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    Unfortunately its screenshots refer to AirPort Utility 5.6, which has been replaced with the prettier, though less useful 6.2.

  • Different GL needs to pickup when we do PGI for specific Customers

    Hi Team,
    our client is looking for scenario as below.
    when we do the PGI system will pickup the GL's from the OBYC settings based on the condition.
    i.e  COGS 123 a/c DR
             inventory A/c
    for all scenarios.
    now client is expecting when i creat SO for specific customer and if i do PGI system should pick  different COGS a/c not 123 considering above example.
    please help me out is there any exit or badi or enhancement spot for this.
    Regards,
    Raman

    Hi Subho da
    We cant change transaction type based on Customer
    One option is to create a Z movement type and assign a new modifier in OMJJ instead of VAX
    Usually, PGI is done from 601 movement type which triggers GBB VAX
    Create a Copy of 601 and change VAX to ZVX and assign another GL in GBB ZVX in OBYC
    Br. Ajay M

  • How to change settings for all users?

    Hi All,
    In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
    my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
    Best Regards,
    Arti.

    Hi Arti,
    In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
    Try the first one and I hope you will get the solution.
    Regards,
    Nishit Jani
    Award points only if you find the information useful.

  • How to calculate power in specific frequency band

    Hi Everyone. I have been trolling on here for months but this is my first post so I hope I am putting this in the correct place.
    What I am trying to do is simple in theory but I have tried over and over and am having no luck in getting this to work. I wish to calculate the power in specific frequency bands for heart rate variability analysis.
    Referring to the article "Using LabVIEW for Heart Rate Variability Analysis"  http://zone.ni.com/devzone/cda/epd/p/id/5832 I am aware of the steps I need to follow.
    I have plotted the RR intervals and resampled these with cubic spline interpolation to give a nice time dependent series. I then wire this to a PSD VI and this is where I am out of my depth.
    I know from the above article that I am looking for power in these frequency bands
    VLF  
    ms2
    Power from 0–0.04 Hz.
    LF  
    ms2
    Power from 0.04–0.15 Hz.
    HF
    ms2
    Power from 0.15–0.4 Hz.
    The NI Biomedical Startup kit can do these, however I am unable to look into the source code as I do not have some required plugins in my installation. I have LabVIEW 8.6 full development system.
    As this is not my area there is a steep learning curve and I have read many forum posts and pages but am still unsure of what I need to do here.
    It is my understanding that the frequency resolution is simply the sample rate/number of samples. So if I require a resolution of 0.01Hz then theoretically 100Hz sample rate and 10,000samples would give me this.Furthermore I gather that the size of the output array from the PSD VI is equal to the # of data points (This i have just noticed from trial and error so I may be wrong).
    Therefore if I am using the above values then is it correct that PSD would return an array and all I need to do is simply sum the contents of those array elements to get the power?
    For example if frequency resolution is 0.01 , then to get power from 0-0.04Hz I must simply add the first 4 elements in the PSD output array?
    I have made a test VI to show what I am talking about and attached it to this post.
    Some feedback on the required approach would be a lifesaver here. I have purchased a couple of books and read through pages of forum posts but am still having trouble with this.
    Many thanks!
    Attachments:
    labviewhelp.jpg ‏53 KB

    Sorry about that, I didn't realize you wanted to run the code too The VI was doing a bunch of other stuff so I have tried to clean that out and just leave the relevant bit. As mentioned above, the case block executes when a peak is detected in the data and appends this value to an array.
    I am using the technique of resampling the data because this is what was mentioned in this http://zone.ni.com/devzone/cda/epd/p/id/5832 and also in another reference that I have been following titled "Heart Rate Variability Standards of Measurement, Physiological Interpretation, and Clinical Use" http://circ.ahajournals.org/cgi/content/full/93/5/1043 which states
    "The spectrum of the HRV signal is generally calculated eitherfrom the RR interval tachogram (RR durations versus number ofprogressive beats; see Fig 5a,b) or by interpolating the DES,thus obtaining a continuous signal as a function of time, orby calculating the spectrum of the counts–unitary pulsesas a function of time corresponding to each recognized QRS complex.35Such a choice may have implications on the morphology, themeasurement units of the spectra, and the measurement of therelevant spectral parameters. To standardize the methods used,the use of RR interval tachogram with the parametric method,or the use of the regularly sampled interpolation of DES withthe nonparametric method may be suggested; nevertheless, regularlysampled interpolation of DES is also suitable for parametricmethods. The sampling frequency of interpolation of DES mustbe sufficiently high that the Nyquist frequency of the spectrumis not within the frequency range of interest."
    Attachments:
    Exp-PulseOximeter.vi ‏205 KB

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • Push notifications for specific apps not working even though the badge updates (Facebook, Google  etc.)

    So this has been happening for months now. I was expecting iOS 5 to fix it, but it hasn't. Push notifications for specific apps do not work. Some come through just fine, but Facebook and Google+ in particular don't work correctly. Facebook push notifications seem to work when the notification is generated from an action performed on a mobile device (ie: someone writes on my wall from another iPhone); if they do the same thing on the desktop, the notification doesn't seem to come through.
    As for Google+, I've never seen a single push notification come through as it should, even though I've seen other iPhones with the same app reciving these notifications with no issue.
    This is particularly strange because the badge on the app icon usually updates (though it feels like fetch, not push), but the notifications simply don't make it into the notification center (or on the lock screen as they should). As I said, this has been happening for months, long before iOS 5, and the problem has persisted now that I'm running iOS 5.
    I've checked and rechecked all notifiation settings for these apps. I've uninstalled and reinstalled them. I've called Apple support and they couldn't offer me any help. Does anyone have any idea what's going on here?
    Thanks for your time.

    I got an iPhone 4s and I'm experiencing the same problems.  I used facebook messenger, and used to get the push notifications to that app, but now that i've deleted it I no longer get the messages directly to the facebook app.
    I have push on in the mail settings and notification center for facebook are on as well.  I also have push notifications on in the settings for facebook.
    I've tried deleting the app and reinstalling, no fix.  I haven't tried a hard reset yet.
    So far, I figured out that it's not iOS or the facebook app, somehow it is a problem with my account.  I logged into my wife's account on my iphone and her account is able to recieve push notifications to my iphone.
    Any thoughts?

  • Java WebDynpro's and IE security settings for file download

    We have a EP 7.0 SP13 environment on which we have deployed a number of own developed java webdynpro's. In some of these webdynpro's we provide the file download functionality. The portal and webdynpro's are used by both internal personnel and external customers.
    On the other hand the default Internet security settings for Internet Explorer, disable "Automatic prompting for file downloads".
    When a user, with these default security settings active, tries to use our webdynpro's file download functionality, the screen seems to refreshes but no file download starts. When (s)he retries, the session runs for some minutes and gives following error message:
    "com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession".
    This behavior is explained in SAPNote 1234847. Webdynpro provides a single-thread module, meaning a user session is blocked for the during of the request. And because the previous file download isn't yet completed the new try can't start.
    Issue now, although the users IE settings allow file downloads and don't block pop up's, he can't download the file and even isn't made aware of the cause of the failure.
    How can we avoid this issue, without having to communicate the
    application requires specific browser settings?

    Welcome to the Apple Support Communities
    See > http://support.apple.com/kb/HT5290
    You can install the program using different ways:
    1. Right-click the application installer and choose Open.
    2. Go to System Preferences > Security and Privacy and select Anywhere in Allow applications downloaded from

  • OK, what is the best way to lower specific frequencies in edit view

    Listen guys, yes I do happen to know about "frequencies" and that you can't fully remove an instrument without effecting another in that same file that plays at the same time, this is pretty basic stuff.
    However, partially removing frequencies is one of the main things AA3 is intended for: "editing" the sound is it's main function.
    There must be some better answers out there about the best way of going about this in AA3.
    Do people use the spectral analysis with the different colors representing different frequencies? I have no idea how to use this.
    Do most people not get into this type of stuff?  I don't get it, seems like this is what the program was designed for (partially) so there must be more techniques out there.

    As mentioned, using the Graphic EQ or Parametric EQs, are the most common tools to adjust the energy around specific frequencies.
    The Graphic EQ provides between 10-30 bands and uses fixed values and widths.  (A slider for 1000 Hz will adjust the sound around 1000 Hz +/- a few hundred Hz in both directions.)
    The Parametric EQ offers fewer bands, but allows for greater control over the frequencies being adjusted and the affect on surrounding frequencies.
    The Notch Filter allows very tight, specific adjustments and is best used for removing artifacts like a 50/60Hz hum or high-pitched buzz.
    Spectral Frequency View makes it easy to see the frequency patterns and find precise frequencies of problem audio.  The editing tools allow you to perform many of the same functions mentioned, but visually in a paint-style application.  The frequency range of the file is displayed vertically, with 1Hz at the bottom and 22KHz (for a 44.1K file) at the top.  Each column represents a particular slice of time and displays the energy level of each frequency band via brightness and color.  The brighter a particular blob is, the louder that frequency range is at that particular point in time.
    There are other spectral views that give different viewpoints of your audio.  For example, the Spectral Pan Display shows a sort of birds-eye view of the audio's stereo-field.  Instruments that are panned further to the left, for example, will display brighter blobs on the left.  Using the selection tools, you can isolate these sounds from the rest of the stereo field and remove, copy, or add effects to the selection without affecting the rest of the audio.

Maybe you are looking for