Settings for the check crystal reports

Hey all,
I have created a custom check printing crystal report. Now i have to tell the process to pick my custom crystal report instead of APY2021-.
Can anyone tell me what should i do to print the checks according to my custom crystal report. Can you provide with navigations because i am new to financials.
Thank you,
Bye.

Hey Sachin,
I went to the path you have told me. It is showing the process name as APY2021-.
But if i print a check now, It is not printing through APY2021-. It is printing through a custom Crystal report called Checkprint.rpt, which is inside a subfolder "custom".
I dont know how it is printing through the custom crystal report.
Can you please tell me where should we see for that.

Similar Messages

  • I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for thi

    Hi,
            I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly .  I would like to prepare or get trained well before taking the exam as I see it costs around $500.
    Thanks in advance for your help in this regard!
    Sincerely,
    J

    Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
    Please use some summarized title for your query.

  • Check the account settings for the outgoing server "(null)"?

    I try to send emails to myself with the attachment of a picture so I can view it on my computer without having to plug it in, because it is synced with another computer. However every time I have tried to send a photo it is unable to send, and it says 'Check the account settings for the outgoing server "(null)"'
    Can anybody help and tell me what this means?
    Thanks

    That means you have an error in the setting for the outgoing server.
    You need to correct that error.

  • Did Lion eliminate the finger gestures for show the previous page and show the next page?  I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet.  How do I get it back

    I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page.  I think it was a 3 finger swipe to the left and a 3 finger swipe to the right.  It looks like this has been eliminated.  I've gone into the system preferences and went through all the new settings for the track pad finger gestures.  I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
    How to I get this back?  I was my favorite one and now I can't get there!

    For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
    cornelius

  • Change the default margin settings for the MS word!

    Hi All,
    BI Publisher version:latest 10.1.3.4
    DB:10.2.0.4
    Oracle Apps:12.0.6
    OS:AIX
    We are facing an issue of which description is as below:
    RTF output is being uploaded through "XML Publisher" Responsibility.
    3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
    This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
    Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
    So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
    Expected output:
    So what we need to do is -
    1. Check the MS word installation on the application server
    2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
    We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
    We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
    Could anyone please share such an issue faced before!
    Thanks for your time!
    Regards,

    Hi All,
    Moreover,
    Our understanding about the RTF output is this -
    When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
    This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
    And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
    So what you could help us with is this -
    1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
    2. Change the default margin settings for the MS word.
    Regards,

  • Where is the parameter panel on the embedded Crystal Report preview in Visu

    Where is the parameter panel on the embedded Crystal Report preview in Visual Studio?
    I found a tweet on google about this.. but the link is invalid.. and I could not find the article on SDN.
    KB #1486469 - Where is the parameter panel on the embedded Crystal Report preview in Visual Studio? http://tinyurl.com/22thlcg
    How do I the show parameter dialog in either WPF or Winforms viewer of Visual Studio 2010.
    Parameters are not even visible in the Parameters Side panel. It is empty too..
    I see two classes ParameterPrompting and ParameterPrompt both, on initialization throws exception.. even to manually invoke them...
    Is it permanently removed?

    Hello,
    Seems like a reported Bug.
    Please check:
    Re: CRVS2010 - Hide Group Tree and Parameter Panel
    A possible woraround but you need to change as per your need:
    CRVS 2010 BETA - WPF Viewer - How to hide SidePanel?
    Hope it helps.
    Thanks.

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

    i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
    with the above error message.

    Hi,
    I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
    It may result from your Anti-Virus. Please refer to the following steps:
    Open MCAfee Console and go to Access Protection window.
    Click Anti-Virus Standard Protection and edit “prevent mass mailing 
    worms from sending emails” rule.
    Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
    C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
    you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
    Reset the IIS And SharePoint Timer service to check if this works for you.
    Here are some similar issues with you, you can use as a reference:
    http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
    http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
    Best Regards,
    Lisa chen

  • SPRO settings for the Creation of treatment codes.

    Hi Experts,
    Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
    Regards,
    harmesh

    Hi
    What is Treatment Code??
    If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
    Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
    Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
    Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
    Regards
    Amitesh Anand

  • Is there any way to change the settings for the built in isight camera?

    I'm sure someone else has probably already asked this, but is there any way to change the settings for the built in isight camera? The resolution is horrible.

    Welcome to  Discussions, Prissymissysays
    The last Apple-published resolution data I saw said that iSight's resolution is 640x480 VGA. I do not know of any way to change iSight's resolution, but that level is plenty of quality for my webcam needs.
    The software you use to operate your iSight controls it, so specific answers will depend on what software you are using when you need more resolution. Check Help in that application to see if it can change iSight's resolution.
    Some software, such as Apple's QuickTime 7 Pro allow you to change iSight's video quality and compression level with its QuickTime Player > Preferences > Recording > Quality: setting. You can add iGlasses software to manually override some iSight settings that are otherwise controlled automatically by the software using iSight. However, I do not think either of these options really changes iSight's resolution.
    Check whether your iSight's lens cover has fingerprints or smudges on it. Then check iSight's image quality of your face in full sunlight about two feet from the lens. Best image quality requires more light than what most people would consider normal room lighting.
    If you are still having problems, consider the applicable suggestions from How to Troubleshoot iSight.
    If you need better resolution than iSight can deliver for some special imaging requirement such as close-up or high-accuracy images, you may need to consider using a different camera that better meets your special needs.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • C++ UFL for 64-bit Crystal Reports

    On 32-bit Windows, COM-based and U25 type UFLs are supported. We have a couple of those style UFLs in use today.
    Now we want to move to 64-bit Crystal Reports.
    What are our options? I can't find any mentioning developing C++ based UFL solutions for 64-bit Crystal Reports on this site. All we can find is documentation on .Net UFLs.
    Anyone knows if the U25 and COM UFLs are still supported on 64-bit Crystal Reports? Where can I get more information. Thanks.

    Hello,
    What 64 bit version of Crystal? Crystal Reports Designer is a 32 bit application, there is no 64 bit version of it. And the COM UFL's use 32 bit technology so converting to 64 bit isn't required, they should work by thunking the values back and forth.
    There is a kbase article - 1525014  Sample .NET UFL and Localization Formula function  but it may not be released yet which includes a new sample UFL written in C#, which is about as close to C++ as you'll get. The readme file tells you how to GAC the ufl so CR can find it as well as the .NET applciation you write.
    If you are using the version of Crystal Reports runtime that comes with Visual Studio it is version 10 and that version did not support the new unicode UFL noted above.
    Thank you
    Don

  • How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

    Hi All,
    I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
    this issue?
    Thanks  in advance! 

    make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
    check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
    another option to put pause in right place:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Where are the SAP Crystal reports built by SAP

    Dear All,
    Can anybody give me a link of the SAP Crystal reports built by SAP? It should be on the portal about hundreds of them. However, I cannot find where they are. Thanks in advance.
    Regards,
    Yuka

    Hi.......
    Please check this link......
    Crystal Reports Samples
    Regards,
    Rahul

  • ATP Buckets of Global settings for Availability check

    Hi ALL
    I have changed the Bucket Parameters and activated ATP time series in Global Settings for Availability Check in Devolpment Server.
    I try to transport these settings but ATP Buckets (Active) are not transprting to the Quality.
    Please give your suggestions , how to transport these settings to the quality and prodction envirorment?
    Thanks
    Kanth

    Hi Datta,
    Thanks for your time and reply.
    There is a requirement before you transfer changes to ATP bucket paramters .
    >Can you please eloborate your above statment.
    Make sure that the updating of ATP time series is activated in Quality and also in production system.
    You set this indicator in Model and Planning Version Management from the SAP Easy Access screen by choosing Master Data -> Planning Version Management -> Model and Version Management.
    >You mean that i need to activate ATP Time series in all envirorments for which i need to delete the version.In our process already PPDS was implemented and  running in Production.We cannot delete the active version.
    These settings are not transpotable?
    Regards
    Kanth

  • Please tell me configuration settings for Availability check

    HI gurus,
    Please telllme configuration settings for Availability check
    regards
    DVSK

    Please read the "Rules and Regulations" of the forum b4 posting any question.  This topic was discussed in this forum quite frequently and had you taken efforts to search, you would have got it.
    Please check this thread
    [can any body explain the configuration settings of AVAILABILITY CHECK|can any body explain the configuration settings of AVAILABILITY CHECK with.]
    thanks
    G. Lakshmipathi

Maybe you are looking for