Settings for the Client by using NetWeaver Portals

Hi,
is there any document/how-to-guide which settings on the client has to be made to run a Netweaver Portal ???
I need the Browser setting and all the settings which have to be made...
Thanks for helping,
Marielle

Hi,
here are the settings as described in the sap help
http://help.sap.com/saphelp_nw04/helpdata/en/7c/48e93be23c8d06e10000000a114084/content.htm

Similar Messages

How to provide security settings for the adobe form using livecycleDesigner

Hello,
I am very new to form designing,
can any one please tell me how to provide security settings for the adobe forms at client side?
Regards,
Menaka

Hi,
that is a good topic for the ADFS forum.
ADFS forum - http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
But you could pass the user-agent as incoming claim type Client User agent. User-agents can be manipulated, so if that is an issue you can look into Device Registration and the Device OS type from there. That is also a incoming claim but requires DRS and
DRS is not available for all plattforms.
Hth,
Lutz

I have lost the correct proxy settings for the ethernet connection using Safari. How do I get back to the original ethernet proxy settings?

I changed the ethernet proxy settings for Safari on my Mac Pro, when I was in a particular place that required extra security. Now I cannot get the ethernet connection to work when back home. The wireless connection works fine. What are the original ethernet proxy settings. How do I make the changes?
Thanks

From your Safari menu bar click Safari / Preferences then select the Advanced tab. Click Change Settings next to Proxies. Select Automatically from the Configure pop up menu.
You may also have to select the Proxies tab. If any of the boxes are selected, deselect then click OK.

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

What privileges for the DB account used by client connect to server?

Hello, After I installed the SBO server packages, I found that it must set DB account in the client side.
I had tried 'sa' account, it works. but I thought we should not leave the super account in each client side.
So I want to know what privileges should be assiged to the account in SQL Server?
Or somewhere already have documents to say how to build up the client account.
thanks.

Hi,
You may check: What privileges for the DB account used by client connect to server?
Thanks,
Gordon

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

How to block the Form Settings for Main Menu to use ONLY "My Menu"?

Hi everyone:
Our customer wants to define an User Menu (My Menu) for each B1 user within the company and restrict the Modules at main menuu2026
How can I block the Form Settings for the Main Menu?... It is possible to give an user Only access to My Menu and denied Authorization to the Modules?.
I appreciate your help!!. Thanks very much
Claudia Gutiérrez

Hi,
'My Menu' refers to the third tab on the Main Menu, and the
authorization of 'Organize My Menu' works as below:
- Full Authorization: Allows the user to access the Organize User Menu
window (Tools -> User Menu -> Organize) and customize the menu.
- No Authorization: The user cannot open this window.
Check the Note [1062635|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1062635] if you are looking for it.
Regards,
Jitin
SAP Business One Forum Team

How to disable the user settings for the transparent container

Hi Experts,
I have an form designed using VC - model, which as a input field and button. When i compile and deploy every thing works fine. I get the form as the output.I am able to call this form in the portal and I am able to get the page.
Issue: When i right click on the fields in the form I get "User settings for the input field AA" and gives me an option to Hide the field. Which the users doesnot want.
I tried it on the VC runtime where i don't get the right click option.
So kindly help me out in resolving this issue.
Thanks
Ketan

Hi Ketan,
If you have chosen the Rendering Client as WebDynpro HTML(by default it is set so) for the callable object, then you would invariably get the 'probelm' you're facing.
Instead you could set for the Object Definition -> Rendering Client as WebDnpro Flex in the Callable object (in Guided Procedures). Now you would not get that hide option.
But one simple question, why would the user want to right click on the field? Even if he hides the fields, he always has the option to make them visible again
Let me know if it's helpful
Regards,
Vani

Trying to call a Webservice - "Settings for the J2EE Server do not exist."

Hi, we're on SAP ECC 6.0 and I'm trying to get access to a webservice:
BAPI converted to Webservice ok
Webservice activated ok
http active ok
WSADMIN - click on the WSDL button - browser launches, user id requested, userid given, WSDL displays perfect! Even tested from the outside.
WSADMIN - click on the Web service homepage - Settings for WDSL generation (RPC or Document style, same result) - Error - "Settings for the J2EE Server do not exist."
Internet browesr - I go to the URL for the WSDL - works again perfect!
Internet browesr - I go to the URL - error ! <faultstring xml:lang="en">SOAP processing failure, error id = 112 </faultstring>
Are the two errors the same?
Do I have to have a J2EE server to enable Webservices?
Is this a complex system change?
Is there a workaround?
Thanks for any tips on getting Webservice to function
Philip

hi,
when the WAS ABAP has a webserver running and the WSDL service up and running (WSDLs are created dynamically) you get the WSDL served from WAS ABAP.
"Webservice homepage" is an application written in Java and running on WAS Java., So, if you want to use that application you have to have a WAS JAVA up and running, you have to have the application 'Webservice homepage' up and running and of course on WAS ABAP you have to have the URL of the WAS JAVA specified to enable the WSADMIN function to link you to the Java app.
Most probably you do not even have a WAS Java running and/or the application 'webservice homepage" not set up. Either way, in my opinion the application "webservice homepage" is crap anyway (because it is not really independent. if SAP implements something strangely on the server side they of course implement it the same way on the client/testing side, so you never find out that in real world scenarios e.g. no client understands the feature X the way SAP implemented it). use any non-SAP-tool to test your SAP webservices, e.g. XML Spy, or SOAPUI.
my 2 cents,
anton

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

Settings for the Client by using NetWeaver Portals

Similar Messages

Maybe you are looking for