Settings for the interface between EWM and the ECC6.0

1.What are the settings we need to do?
2.While creating the integration model for EWM and ECC6.0 what will be the sequence of the master data need to transfer

hi,
check the forum links
http://help.sap.com/SCENARIOS_BUS2007/helpdata/EN/CC/0923ABADF74C158C38F5945E4623DD/frameset.htm
ECC 6.0 and SCM 5.0 integration for EWM
regards
muthuraman.d

Similar Messages

Need to remove the space between Menu and the Inner screen

Hi
I am using forms 10G.
In my screen there is some space is coming in between menu and the inner screen and also same in the left side as well .
So can any one tell me which parameter I need to change so that the inner screen should display just below to the menu and same for the left side as well ?

Hi
Yes , If I change that then it is woring fine .
But my question is :- I have 10 forms in server , and in 2 forms I have changed some functionalty then I have FTP it to server .
Now all the forms are coming with some spaces between menu and inner screen . This is what I am little confused .

What is the difference between wifi and the 3G plus wifi?

I want to get an ipad for myself and I have no idea what the difference is between the regular wifi and the 3G plus wifi. If somebody could explain the difference to me so I can decide which one to get I would greatly appreciate it. Thank you in advance!

On the iPad if you use wifi you have to be close to a wifi access point either in your home or at a location such as Starbucks or Paanera. This connection normally will transfer data faster than 3G. However, 3G will give you access in areas where there is mobile telephone service from Verizon or AT&T albeit at a slower data transfer rate than wifi.
Wifi will be cheaper than 3G since you'll have to subscribe to 3G service from Verizon or AT&T.
BTW, you won't be able to use "3G plus wifi" at the same time.

I have the original apple tv. Works fine. What's the difference between it and the new one that's only $99?

I paid $250 for the first generation apple tv and wonder if there's any new features to make it worth upgrading to the latest apple tv. What am I missing?
Thanks, Tzipora

The new one has no hard drive instead it has 8GB of solid state memory.
You can't sync to it as a consequence. It uses less energy, is smaller and doesn't get hot enough to fry an egg.
You lose analogue video/audio out. It's HDMI/optical only.
No mopre iTunes LP/Extras functionality. No sending audio to Airtunes speakers fro AppleTV.
The new one has a more powerful processor and can handle 720p 30fps which the old one couldn't and higher bitrates. It tends to be more responsive going through menus but I prefer ATV1's way of sorting things and interface in general.
You lose the ability to up/downscale video output to anything other than 720p. Output if fixed to 720p.
It's still evolving. To my mind it's more an iPhone/iPad accessory / iTunes rental vehicle with some US centric (on the whole) novelties - Netflix, American football feeds may appeal to US users, but no use if you can't get Netflix in your country.
The game keeps changing and iCloud features will enhance it's functionality but currently possibly only in US. iCloud may let users play their purchases across the internet rather than from local storage - could be gtreat if it works but only provided things remain available in the store.
US had TV Show rentals as well as Movie rentals, but TV Show rentals have been scrapped.
You couldn't purchase anything at all on it until recently, and that's probably only TV Shows and only in the US currently. No browsing music or music videos.
iphones/iPads can use the Airplay feature to send video/audio across wi-fi to the AppleTV but personally I'm not that impressed by it.
Vimeo has been added recently to complement YouTube, Flickr, MobileMe (end of line anyway).
It's a mixed bag really - suits some people down to the ground, has limitations for others.
AC

What are the differences between VISA and the old serial calls in regard to device communication?

Recently, I had to communicate with a piece of equipment, (a Yokogawa UM-330 Green Series Digital indicator). The device was configured to communicate using RS-485 protocol. I purchased a RS-485 to RS-232 converter in order to communicate with the device via COM 1 on my PC. When I attempted communication in Max, using VISA read and write commands, I could not get the device to communicate. I even attempted writing a stand-alone VI to establish communication. Still, no-dice. Finally, I resorted to using the old serial call VIs. This made the device jump up and say hello. What I really would like to know is, has anyone experienced problems like this when
attempting to communicate via seral with other devices using VISA, and if they have, what are the reasons for these problems? Is the problem specific to devices using RS-485? Or is the problem more device-specific?

We have been using serial devices for more than ten years (proprietary acquisition cards and third party devices) using a variety of languages (BASIC, CVI, LabView...). I always found that the main problem are correct configuration of the serial port and cabling: once these items are correct, it's easy to obtain some reply from your devices (maybe not so easy to obtain the CORRECT reply or to interpret it...).
I've used both old style VIs (vith LV 5) and VISA with success on the same devices: still I am a little confused about VISA. Maybe would be better some explanatory document by NI about VISA and serial communication.
Anyway, my approach is at present: don't bother about control panel and/or MAX configuration of the port: open the device and configure i
t as you need at the beginning of your application.
Next use simple VISA Write and VISA Read VIs.
Be sure to set the correct timeout: some devices are extremely long in replying (for example: an Infratek wattmeter takes as long as 45 seconds to send measures if you ask to it an harmonic analysis...!).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

What is the relationship between iCloud and the App Store?

My wife has an ipad and has purchased some apps from the App Store. I have a new iphone5c and managed to load one of her purchased apps onto my phone by using her App Store ID and password. When I did this, a cloud symbol appeared and I assume I was not charged for the download. I have some questions about how all this works.
I have not, to my knowledge, set up any icloud account for my new iphone. Did aforementioned app download from her icloud?
Does this mean that I should not set up an icloud account of my own on my new phone? What about backing up my contacts? I would like to continue sharing purchased apps.
Can you use the same icloud account on more than one device? If so, would they have to have identical contacts and apps?
My wife also has a new phone; should she set up another icloud account?
Is my Apple ID related to either the icloud or App Store?
If anyone can help me sort this out it would be greatly appreciated.

ICloud and the App/iTunes Store are different services from Apple, you can use either by logging in with an Apple ID, you don't need to use the same ID for all services on the same device.
You can both share an ID for the iTunes and App stores so you can share purchased content but each use different ID's for iCloud, so you have your own contacts, calendars etc. you can use the same ID on more than one device.

Whats the difference between music and the library?

I'm trying to delete my playlists off my iTunes. I went to the devices and then to options and I clicked on manually manage music and videos and when I click apply is brings up a window that says that my phone is synced to another iTunes library, and if I want to erase and sync iTunes library? it says an iPhone be synced with only one iTunes library at a time. erasing and syncing replaces the contents of this iPhone with the contents of iTunes library. under library then music it says I have 273 songs but on my phone it says I have 485 songs. I don't understand that, and I don't want to lose all my songs that are on my phone. Mainly I need help with deleting playlists with not deleting my songs.

Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

The interface between SAP and Banking system

Hi gurus,
Now we want to integrate SAP system and Banking system.I have some questions need to ask you.
First, do we have any PI Content regarding that?I failed to find any content in service market
Second,which kind of adapter techniques I can choose to configure?
Currently I think the possible solution may be as follows:
1. Create custom ABAP program to generate txt files,then use XI FTP adapter to translate those files to another location,where banking system can dispose accordingly.
2. The similiar techniques as 1,but to use ABAP proxy on SAP side.Through this way no txt files are generated,so it's more secure.
3. Using idoc techniques.I'm very interested in that,but can we implement this scenario by using idoc?How?
Any info or tips regarding banking data integration will be appreciated.

When it comes to functional view,do you know what kind of data need be tranlated?
This is again something that only the Bank can answer. There are many standards which are in use with various banks. e.g some banks use EDI for all types of processes. You have to confirm from the bank about the format in any case. It is also possible that the bank uses proprietary format. You may use both file or jdbc adapter.
it seems XI supports FTPS protocal, right?
Correct
But some files may be need to be installed on WAS.
The public certificate of bank.
Regards,
Prateek

What's the difference between educational and the discount for existing customers

i am both a student and an existing customer. the price would be the same for me with the new promotion. which would be a better route to sign up as? with the existing-customer discount my understanding is that the price will go up after a year. what happens in the educational version after a year? are there any other differences i should know about?

Hi Mrtunes,
I'm not seeing any kind of noteworthy difference.
Here is a screen shot of the billing terms for signing up for the educational route (US store)
(click to view larger)
-Dave

What's the difference between Creator and the Enterprise?

I mean if I want to install a powerful tool for Java or J2EE stuff, which one is better and has the most functions? Enterprise Edition or Creator Edition?

Creator will be an additional pack to base NetBeans
too (not know when).Indeed the current strategy is to transform all Sun Java Tools into NetBeans addon packs. This nas been done already for Java Studio Enteprise (its source will be available in the NetBeans CVS repository by JavaOne). For Creator this is going to happen in NetBeans 6.0 timeframe which is 2007.

I recently installed Firefox OS Beta on my Nexus 7 tablet. What are the differences between that and the Firefox browser?

I recently installed Firefox OS Beta on my Nexus 7 tablet.

hello, it think you have installed the beta version of firefox for android. the beta version incorporates new features in the browser six weeks ahead of the regular release. so, you're currently on firefox 26 beat, so you're already getting the redesigned homescreen for example : https://www.mozilla.org/en-US/mobile/26.0beta/releasenotes/

What is the difference between spiceworks and the network monitor

ok thank you

is there a difference between the two or is network monitor a subset of the spiceworks desktop?
This topic first appeared in the Spiceworks Community

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

Distance Between user and The kinect Device

Hey all :)
how to get the distance between user and the kinect ??
i found a function but it's in kinect v1
public static double GetSkeletonDistance(this Skeleton skeleton)
            return (skeleton.Position.X * skeleton.Position.X) +
                   (skeleton.Position.Y * skeleton.Position.Y) +
                   (skeleton.Position.Z * skeleton.Position.Z);
i don't know how to make it under kinect v2 ?

Joint head = body.Joints[JointType.hipCentre];
return head.Position.Z ;
it always return 0 :/
There is no hipCentre in Kinect v2 SDK. Have a look at
JointType Enumeration. There you can see all the available JointTypes. I am using the
SpineBase , because users may lean from time to time. So
return body.Joints[JointType.SpineBase].Position.Z;
should give you a nice distance. Keep in mind, that even the smallest changes will affect this value. So if you want to check for a distance, you might want to use a threshold or even joint accumulation.
Best regards,
Alex
Edit: Please mark Brekel's answer as answer. Thanks.

What is the Difference Between Restoring and Resetting etc on IPhone?

What's the difference between going on to iTunes and hit restore button and By holding the power button and home button at the same time? Also the diff between those and the factory settings?

Resetting is the equivalent of a reboot. Restore reloads the whole operating system. Restoring from a backup lets you restore the phone to the exact settings and data it had at the time of the backup. Restore to factory settings reloads the operating system and wipes out all data.

Settings for the interface between EWM and the ECC6.0

Similar Messages

Maybe you are looking for