Settings:General:Date & Time: Year date is 2554BE
Hi, can anyone help me.
The Problem: Settings:General:Date & Time: Year date is 2554BE - the year date selection will only give me as choice of about 50 years at 2554 BE - when I spin the wheels to select 2011 - the year dates are ghosted and the wheels automatically flip back to 1st January 2554 BE.
This problem is affecting my date, times in Email and Calendar and some APPS where I am trying to book accommodation, flights etc.
I noticed this after an update syncing session late Nov, early Dec. I didn't understand what the ramifications would be until I have started to use my travel apps for booking things.
I have tried syncing my IPhone 3 to Itunes in the hope it would fix it, but it hasn't to date.
regards
Dianne
It sounds like you are using the wrong calendar. Go to Settings, General, International and make sure the Calendar setting is Gregorian.
Similar Messages
-
Settings, General, Date & Time
If I set my iPhone to Set Automatically (On) under the Date & Time Setting, should it not show the time zone city where I currently am located? My problem is that I am sitting in Phoenix, and the zone displayed is Denver. This will be a problem come daylight savings time, because Arizona does not change. I understand I need the On setting to correct my calendar times as I travel, and to update the time to my current location. How do I correct the automatic setting from Denver to Phoenix?
Page 151 iPhone5 user guide....does this help?
Set whether iPhone updates the date and time automatically
Go to Settings > General > Date & Time, then turn Set Automatically on or off.
If iPhone is set to update the time automatically, it gets the correct time over the cellular network and updates it for the time zone you’re in.
Some carriers don’t support network time in all areas. If you’re traveling, iPhone may not be able to automatically set the local time.
Set the date and time manually
Go to Settings > General > Date & Time, then turn Set Automatically off. Tap Time Zone to set your time zone. Tap the Date & Time button, then tap Set Date & Time and enter the date and time. -
Missing Menu Item: Settings- General- Date & Time- Automatically Set Time Z
I'm running F/W 1.1.4 on my iPhone (German TMobile contract). The Date&Time settings menu is lacking the menu item for the automatic adjustment of the Timezone. The Apple Genius Bar recommended to reset the phone, which I did with no success. Same my second iPhone with TMobile contract. All other iPhones with identical F/W build numbers which I looked at at the (US) Apple stores showed that menu item.
Does anybody see the same problem? Any idea to resolve this?
Many thanks, Hans-UwePage 151 iPhone5 user guide....does this help?
Set whether iPhone updates the date and time automatically
Go to Settings > General > Date & Time, then turn Set Automatically on or off.
If iPhone is set to update the time automatically, it gets the correct time over the cellular network and updates it for the time zone you’re in.
Some carriers don’t support network time in all areas. If you’re traveling, iPhone may not be able to automatically set the local time.
Set the date and time manually
Go to Settings > General > Date & Time, then turn Set Automatically off. Tap Time Zone to set your time zone. Tap the Date & Time button, then tap Set Date & Time and enter the date and time. -
The motion is making me dizzy! Please help!
Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me. My date/time settings were not automatic (candy crush cheats!!).
-
I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?
No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS? -
How can i set the date time year to my i pod
how can i set the date time year to my i pod touch
Hello Theodora,
You can do this via your iPod's Settings application.
B-rock -
Update real time account general data into a custom table
Hi,
I have created a z table for storing account general data for some business requirement. I have created a program and executing batch job to update this z table on periodic basis. Can anyone suggest some other alternative solution to update this z table whenever an account gets created/modified in CRM system? Instead of running a batch job periodically, I need a real time replication of the account data in this custom table.
Thanks and Regards,
Sneha.Hi,
Thanks for your reply.
But, Can you elaborate the solution, Can we use Business Transaction Events(BTEs) for updating Partner data? Will these be triggered for Account Creation/Modification. If so, Can u suggest any BTE which can be used for my requirement?
Thanks and Regards,
Sneha. -
How to How to get FI field status settings for General data
Hello All,
Can you please tell me How can I achieve field status settings for General data.
I have some code to get field status settings for account assignment block but I need General data block data.
Can you please help me with the same.
I got the below code to get field status settings for account assignment block But I need General data block information.
FUNCTION z_fieldstatus_getdetail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_BSCHL) TYPE BSCHL
*" VALUE(I_BUKRS) TYPE BUKRS
*" VALUE(I_SAKNR) TYPE SAKNR
*" TABLES
*" T_COBLF STRUCTURE COBLF
*" T_FIELDS STRUCTURE TCOBF OPTIONAL
*" EXCEPTIONS
*" ERROR_MESSAGE
* liefert Feldstatus in Liste t_coblf:
* Feldname (DDIC) nicht in der Liste -> Feld ausgeblendet
* Feldname (DDIC) in der Liste -> Feld eingabebereit
* required = 1:
* Mussfeld;
* required = 0: kein Mussfeld
* active = 0: Feld ausgblendet
* Als Hilfstabelle wird die gesamte Feldliste der Felder (t_fields)
* ausgegeben,
* deren Eingabebereitschaft im Customizing steht
DATA: ls_faus1 LIKE tbsl-faus1.
DATA: ls_faus2 LIKE tbsl-faus2.
* Feldstatus holen
CALL FUNCTION 'FI_FIELD_SELECTION_DETERMINE'
EXPORTING
i_bschl = i_bschl
i_bukrs = i_bukrs
i_saknr = i_saknr
IMPORTING
e_faus1 = ls_faus1
e_faus2 = ls_faus2
EXCEPTIONS
customizing = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE a613(/ssc/comon).
ENDIF.
DATA lv_char.
DATA int_coblf LIKE coblf OCCURS 0 WITH HEADER LINE.
DATA p_cobl LIKE cobl.
DATA: dummy_ktosl LIKE bseg-ktosl.
PERFORM kontierungsblock_ermitteln(sapff001)
TABLES int_coblf
USING lv_char(1)
ls_faus1 ls_faus2 dummy_ktosl.
t_coblf[] = int_coblf[].
SELECT * FROM tcobf INTO TABLE t_fields.
ENDFUNCTION.
Thanks in Adv.
KaustubhHi ,
Looking at the question the first thing that comes to my mind is what is the organization structure that you are following .
As you have mentioned that you have used segment insted of profit center for splitting , what is the scope of profit center in your implementation .
in implementations where locations are devided as profit centes it becomes very necessary to mandatorily split the documents based on profit center .
in your case as you have set it as segment i dont find it an issue of you keeping it as optional as it will not give you and error during your operations , as you have made profit center optional in splitting charcteristics .
hope this suffices .
Regards ,
Dewang -
I am really angry that I get this message every time I try to update Itunes.
“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
What kind of gobbledegook is that? Are you or Microsoft crazy. Us computer users need simpler instructions. Or you need to write your programs so that they work.
Signed,
Frustrated Apple User
Dean Weaver“The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes. Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am not able to turn off voice over. I have tried to do settings -> General -> Accessibility -> VoiceOver and then triple clicked it but the VoiceOver won't turn off. What can I do? I have even tried to reset the machine keeping the data, no use.
A few people have reported problems with the hand gestures since IOS 8. It's not normal, I have don't have the problem on my iPad 4. I doubt it's a major problem but if it happens regularly I'd have it checked out by the Genius bar at the Apple Store.
-
Cannot upgrade iPad 3 to iOS6.
Earlier, I did get the iOS 6 update under Software. However my iPad ran out of power and the upgrade did not go through. Now that my iPad is powered up I cannot seem to get the software upgrade.
When I go to Settings -> General -> Software Update , I no longer see the iOS 6 upragde and instead it says iOS 5.1.1 Your software is up to date.
Help please.
ThanksTry updating using iTune (computer)
-
Settings General About Diagnostics & Usage Diagnostic and Usage data
Settings > General > About > Diagnostics & Usage > Diagnostic & usage Data.
Everytime I look Diagnostic & usage data I see full of crash reports such as Log-aggregate, LowMemory, assistivetouchd and etc... This crashes/crash report should be the reason why my ipod touch 4th gen is slow, sometimes hangs for a second and sometimes crash apps. I already tried to reduce the memory usage to 50% and momentarily double click home button to remove the applications running at the back but still crash reports are adding and reach about 100 and still increasing! Please help me to solve this problem. Maybe give me a tip on how to avoid, minimize or remove this crashes / crash reports on my ipod touch. thank you.Welcome to Apple Communities
Hold Sleep and Home buttons and it will restart. It should be better -
I used to always check my data useage on my phone
SEttings: General: Useage so I could keep track of it and I would reset on the
day my phone provider account reset - since doing the update iOS 7.0.4 I cannot
find this option anymore - does anybody know if the option is still there and has
been moved somewhere else or the option is now just gone? Any ideas would
be greatly appreciatedIf you are referring to the cellular usage, it is now located in Settings>Cellular. That will give you phone call usage and cellular data usage.
-
how does one download a ios update on iphone4 ios4.1 to ios7? I have gone to Settings/General/ (there is no option for update to pick)
How to update your iDevice
Read the entire article. -
Want to upgrade iPad to ios5.11 went to settings general I have no upgrade software area ,how do I get this.
See below.
http://support.apple.com/kb/HT4972
Maybe you are looking for
-
Oracle BI plug in needed for Microsoft Word 2007
Hi Gurus, I'd like to add an Oracle BI plug in for Microsoft Word 2007 The OracleBIOffice.exe creates plug ins for Excel and Powerpoint only. I'd appreciate any help! Best regards Laszlo
-
Dynamic Link complicated question
This is the story..... 1. I shot & edited a training session (many sessions - over 40 hours) 2. I did minor editing in Premiere, used Dynamic Link to send to Encore, set up a first run title page with 8 links to the 8 chapters.(all end actions going
-
Cant log into SQLPlus receive these error messages ORA-01034 & ORA-27101
Hi just installed the latest release of Oracle DB 10g personal edition Windows XP Professional and Home Edition (seperate PCs). The installation went pretty smoothly. After the installation the db was up and I tried sqlplus and isqlplus and the html
-
Lost emails for 3rd time on iPhone 6
I Openned my mail today and every single email is gone! Kaput. tis this is the 3rd time for me. I switched up from a 4s thinking it was something I my hardware, but it's following me. I get my mails from a server I access as IMAP. What a disaster
-
Select from many tables of the same type
Hi everybody! My problem is the next: I have many tables with big account of data (millions regs), so I did something like that: The regs dated 1999 are in the table XXX_1999, those dated 2000 - in XXX_2000, and so on. Now, if I want to make query fr