Settings in BW system for data to b sent from Xi

hey guys..
i hav an absolute fresh BW system n my Xi system (not a fresh one)
need to knw, wot are the settings i need to make on the BW and on the Xi system for the interfaces (i/b n o/b) which i create in Xi system to b reflected in the BW system when i hit the tcode: Sproxy.
need to send data frm xi to bw...(or vice versa)
regards,
vishal
Ps: I dont require the step by step solution for sending data from BW to Xi

Hi ,
This was the extract from a link ..
The integration of SAP XI and SAP BW offers the following advantages:
• Central maintenance of message flow between logical systems of your system landscape.
• Options for transformation of message content between sender and recipient.
Mappings help you to adapt values and structures of your message to the recipient. In this way, you can transfer different types of files to a SAP BW system using interface mapping. However, in any case, it is necessary to transform the data into a format that corresponds to the interface of the function module that is generated in SAP BW and used for data transfer. The function module contains a table parameter with a flat structure. This means that the data have to be transformed so that they fit to a flat structure in SAP BW.
• Using proxy communication with SAP BW.
Proxies are executable interfaces generated in the application systems for communication with the SAP XI Integration Server. We recommend the use of proxies for communication with SAP BW because they guarantee Full Quality of Service (Exactly Once in Order). They also guarantee that the data is delivered only once and in the correct sequence. The SAP XI Integration Server keeps the serialization as it was established by the sender.
Also go thru these links which are really good and it answers your question very clearly:
https://websmp202.sap-ag.de/~sapdownload/011000358700002609662004E/NWHowToPushBIXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21d8aa90-0201-0010-5e83-a3798b9a5ee0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8c10aa90-0201-0010-98a0-f071394bc9ae
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/-1/articleContainer-284794226fe1646470
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
http://help.sap.com/saphelp_nw04/helpdata/en/9b/821140d72dc442e10000000a1550b0/content.htm
http://www.microsoft-sap.com/technology.aspx
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
How to integrate or Establish connection between SAP XI and BIW?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da

Similar Messages

  • Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

    Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

    Thank you for response , the question is : How can i download operation system from Apple website ?

  • Transaction for data particular plant  number from BW to APO is not loaded

    Hi gurus,
    Transaction for data for particular plant  number from BW to APO is not loaded . I checked the transfer rules and update rules there is no restrictions for this plant number. pls help guys.
    Regards
    shekar reddy

    Hi Shekhar,
    What is the mechanism you are using to export data (APD, Open Hub or any other)?
    Check if the data is getting extracted in the proper source in BI system itself.
    Regards,
    Durgesh.

  • System Wide Data Formats Not copied from Development to test

    I am using OBIEE 10g. When I copy my dashboards and reports via the Catalog Manager from the development environment to the test environment the system wide data formats are not being copied over. That is, all the ones that I saved under "Column Properties->Column Format->Save As System Wide Default" are not being copied over. I am using archive and unarchive in the Catalog Manager to move from development to test environment. So my question is where are these system-wide defaults stored and what do I need to do get them copied over?
    Thanks in advance!

    Hi
    the system wide column formats are stored in catalog under system/metadata folder.
    copy this folder from dev env to test env. via catalog manager, restart ps.
    assign points if found helpful.

  • Ink usage for same colors but sent from different workspaces

    Let's say I print green (0,255,0) from Adobe RGB with a printer profile. Then I convert it to ProPhoto RGB (same green is now 76,230,60 in ProPhoto) and print it with the same printer profile. Do inkjet printers use the same ink combination for printing same green but sent from different workspaces?

    Ok, it's obvious, forget about it.
    Another question: Can we know that RGB printer profiles use which RGB color space for converting from the workspace?

  • Interfacing two SAP systems for data collection

    hi,
    A scenario. i have two sap systems, one is 4.7 and another is ECC. based on one value in 4.7 i want to collect data from ecc. this has to happen thru XI. so shud i write a function module in ecc which takes as parameter the input value and picks data from database and exports the same and enable this function module as RFC ?
    so then from XI this function module can be called with the required input parameter ? can anyone give me the code/steps or how to do this ?
    thks

    Hello,
    why do you want to use XI? I would create a RFC-enabled FM in the ECC system and a RFC destination (transaction SM59) in the 4.7 system (calling the ECC system). Then create a report in the 4.7 system, getting the value and calling the RFC in the ECC system via:
    CALL FUNCTION <RFC function> DESTINATION <RFC-destination>
    Best regards
    Stephan

  • Sender RFC Adapter - Data to be sent from R/3

    I am working on a scenario where I have to send data from an RFC-enabled function module from R/3 to a file server via XI. The entire scenario is asynchronous.
    Sender: RFC Adapter
    Receiver: File Adapter
    I have done all design and the configuration. Both communication channels are working. I have the RFC destination also set up correctly in R/3.
    However, when I run my ABAP program where the RFC-enabled function module is called, I get a shortdump with the message <b>"senderAgreement not found: lookup of binding via CPA-cache failed for".</b>
    Plus: " The error occurred during an RFC call to another system."
    Could someone kidly help?

    Hi,
    Follow these steps :
    1. import the ECC_ Server into ID if not done
    2. Refresh Cache : Tcode  SXI_CACHE
    3. Please check for Sender agreement config
    4. Check out the parameters when  R/3 calls back XI, it passes the SYS-ID and client number and checks the same in the Integration Configuration Under Business System Service-> Adapter Specific Identifiers. The R/3 System ID and the client Number
    Also check out these blogs..
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    regards
    Aashish Sinha
    PS : Reward points if helpful

  • Maximum package size for data packages was exceeded and Process terminated

    Hello Guru,
    When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
    Thanks & Regards,
    Suresh.

    Hi,
    When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you can overcome this issue.
    You can also try RSCUSTV* where * is an integer to change data load settings.
    Change Datapackage size for extraction, use Transaction RSCUSTV6.
    Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
    IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
    Hope this helps.
    Thanks,
    JituK

  • Control parameters for data transfer

    Hi!
    There are no data in SBIW source system - General Settings - Maintain Control Parameters for Data Transfer.
    How does it have an influence on loading data?

    Hi,
    Maximum size of a data packet in kilo bytes
    The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
    Frequency with which status Idocs are sent
    With this frequency you establish how many data IDocs should be sent in an Info IDoc.
    Standard settings
    Frequency 1 means, for example, that there is an Info IDoc for every data IDoc. In general, you should choose a frequency between 5 and 10 but not greater than 20.
    Recommendation
    The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.
    Maximum number of parallel processes for data transfer
    Select a number greater than 0.
    Parallel processes can be set from the SAP core release 3.1I onwards.
    These parameters are, therefore, ignored in releases before 3.1I.
    However, there is a possibility of importing the SAP release 3.1I into earlier releases.
    The more parallel processes that can run the better the performance of your system will be. However, you must bear in mind the number of available dialog processes here.
    It will be fine and more effective if you use sap recomended values in those respective fields

  • Logical System for Financial Accounting FI lacking; information systems

    Hello,
    we`ve got a problem with the creation of a SC. After the selection of a product (doesn`t matter if it`s a "free text", good or service), we got always the following Error:
    "Logical System for Financial Accounting FI lacking; information systems"
    I`ve already checked the attribute "ACS" in PPOMA_BBP and the RFC-Connections. Have anybody an idea, what i can do else or where i can get further information about this error (like System Log,...)?
    Regards Jochen

    Hi Jochen,
    Kindly check the following SPRO settings in your system
    1. SPROSRM ServerTech Basic settings--Define backend system for Prod category. (Ensure that your category which you are using in your SC is defined here with source/target system)
    2. SPROSRM ServerCross App Basic Settings--Define Objects in backend systems. (Ensure that Purch grp, prod category, source system, and PO details are maintained here)
    3. SPROSRM ServerCross App Basic Settings--Define G/L account for prod category. (Ensure that your Prod category, Source system, Acct assgnmt categry and G/L account are maintained)
    Pl check the above and revert back.
    Regards,
    Nikhil

  • Uninstalling an application system for ever

    Hi,
    I need to uninstall two application servers forever both are only JAVA systems. These systems has SMD configuration.
    I can stop the SMD and uninstall these application servers using sapinst and they are gone from SLD. My question is how I should remove these systems from solution manager.  If i uninstall them then also these system SMD configuration in solution manager wont be deleted. Want to know how can i delete it from my SLD, SOLUTION MANGER (SMSY,LMDB)
    I want to know the definition of removing these servers from WILY in solution manager.
    How i can remove it from SMSY and LMDB of solution manager?
    Should I process from SMSY and select those systems and delete them directly?

    Also,
    To help you further, you may refer below notes/KBA which are wonderful for this purpose.
    To remove MS from Solman
    1952567 - How to remove no longer relevant manage systems from Solution
    Manager system
    For removal of tech scenarios from MSC
    2042294 - How to Remove a Technical Scenario from Solution Manager 7.1 Managed System Configuration
    How to delete and clean.
    1954339 - How to delete an obsolete managed system in Solution Manager?
    I believe that all completes the answer you were looking for.
    Regards,
    Divyanshu

  • Configurational settings for data source in BI server

    Hi Sdns,
    Where can we make  configurational settings for data source in BI server.
    Advance thanks to replies.
    karun

    Go to T-code RSA13.
    Search you desired BI system.
    Right click on it and Display Data Source Tree.
    There you can see all your datasource with BI as source system.
    You can do the same for other source systems.
    Double click on the datasource to see the fields and configuration.

  • ICR - Importing Data from Other SAP Systems for Reconcilaition

    Dear Ralph and Other Experts,
    At my current engagement we need to import data from a subsidiary separate SAP system for reconciliation. There are scenarios where one side of an Interco document is posted in the corporate system and the other half is posted in the subsidiary's system. The posts from the subsidiary are totaled by comp code account and trading part and then posted in the corporate system.
    This will make it challenging to run automatic rule assignments because scenarios will arise where one document in the subsidiary needs to be matched to many documents in the corporate system.
    I did some searching on changing the DataSource   in FBIC008 for certain company codes to file upload or external but cannot find documentation on how to complete the configuration or how this functionality it works. Has anyone used this functionality? Could somebody please explain or link me to a document about using this external or file upload functionality in the ICR system.
    Best,
    John S

    Hi Frank,
    Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
    1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
    2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
    3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
    Regards,
    Chen

  • Now operating system for iPad won't let me post photos in Facebook. The sent and upgrade to fix bugs but it freezes in my settings and won't launch

    bug in new operating system for iPad
    fix stalls and freezes in Settings

    You are not speaking to Apple here. We are all users like yourself. we cannot "fix" anything. Please describe which Settings area you are having problems with, what exactly happens and what, if any, error messages you receive.
    one thing that cures ,any system errors is to reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

  • HT4085 Did all these things mentioned in this article, even did a system reset including data and other settings. iOS is up to date, still the iPad 2 display is not rotating.

    Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
    This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.

    Just check again.
    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected.

Maybe you are looking for