Settings in Query Designer that will display eact and every record

Hi,
First Name and Last Name are the (navigational) Attributes of an Employee_ID
I a query user may use either Employee ID or Employee First Name or Employee Last Name
Issue:
If user uses Emp_ID it is displaying 100 Employees
If the user Uses Employee First Name then it is displaying 93 Employees it is not displaying 7 employees because 7 of them got the same First Name
Simillarly for Last Name as well
How can i make a setting that will display every individual  record of an employee
Thanks

Hi,
The reason why i am using First & last Name is as the users want First & Last name of an employee in drilldown and need to sork on either according to their requirment........
I am not load any text data for Emp _ID
the name based selection will not have uniqueness, only possible way is use the processing type as customer exit to chk all the records from the master data table and to display
Could you please explain me in detail on Customer Exit option
Thanks

Similar Messages

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Is there a URL portlet that will display a site in a sub frame (iFrame) ?

    Applogies in advance if the terminology is wrong or I am in the wrong forum.
    Basically I want to set up a portlet on a page that will display the contents of another web site. So you define a URL and the website that you pointed at is displayed in a sub frame (iFrame) on a page in out web site.
    I know this has been done as I have seen it on oracles test portal site. Is this a standard function in portal or do I have to create a specific provider/portlet using the PDK.
    Any advise will be appreciated.

    Hi Dave,
    I have done something similar, I think that you have to create an HTML Portlet that contains the IFRAME.
    then you can set [IFRAME_name].location from Javascript.
    Regards Michael

  • I need a function that will go through and encrypt all the strings

    I want to use one way enryption and need a function that will
    go through and encrypt all the strings in my password column in sql
    server 2003.
    I also need a function that compares a test password string
    is equal to the hash value in the database. Can anyone give me some
    advice in this?

    Apparently it's not as simple as I thought. My first instinct
    was
    update yourtable set password = '#hash(password)#'
    but that will crash
    This is inefficient, but you only have to do it once.
    query1
    select id, password thepassword
    from yourtable
    cfloop query="query1"
    update yourtable
    set password = '#hash(thepassword)#'
    where id = #id#

  • I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    If you've forgotten the answers, you can't do that yourself. Click here, tell the iTunes Store staff that you can't call, and see what they say.
    (109704)

  • Does anyone know how to burn a CD+G (karaoke CD) onto a Mac so that I can then burn it onto a CD to use in my karaoke machine that will include lyrics and songs?

    Does anyone know  how to burn a CD+G (karaoke CD) onto a Mac so that I can then burn it onto a CD to use in my karaoke machine that will include lyrics and songs?

    You already have a CD+G disc.
    You cannot make another as it is a violation of copyright.

  • I have 3 songs that will not download and the volume of error messages from Itunes about these "3" is annoying. I know my way around Itunes but cannot find a way to delete them and stop these Itunes download error messages.

    I have 3 songs that will not download and the volume of error messages from Itunes about these "3" is annoying. I know my way around Itunes but cannot find a way to delete them and stop these Itunes download error messages.
    Thank you.

    Thanks Mohammad - much appreciated.
    I also got a response from Apple who said that there was a problem related to fonts and the encryption.xml file
    Once we'd removed this we were able to upload the epub no problem.
    It's odd that the system seems to say that all is okay when it isn't. We have to rely on guesswork rather a lot using iBook Producer.
    Anyway, all sorted now and thank you again for your contribution.
    Best wishes and a Happy New Year!
    Sue

  • OAF matester detail page : How to have a "Show All" feature on screen, so that all the master and details records are expanded .

    Hi ,
    I was trying to have a "SHOW ALL" feature on the master - detail page,
    the detail table is an advancec table.
    Please help me with inputs on how to have  "SHOW ALL" feature,
    Currently, we have to click on  ":Show" for each record at master level to view the child data.
    Trying to achive "Show All" Feature so that on click of this the master records on the page 'Expands"  showiing all master records with respective detail records.
    Regards
    bhuvanm

    Hi,
    You should not set DetailFlag = "Y" in whereclause because there is no such record.
    Also detail flag is transient attribute and not the query column, hence the error "Invalid indentifier".
    I asked you to use DetailFlag as query column with static value "Y".
    for example:
    SELECT "Y" detail_flag
    FROM <table_name>
    This will display all the table records in expanded format. if you want it conditionally then use decode on some bind parameters.
    For example:
    SELECT DECODE(:1, "SHOWALL", "Y", "N") detail_flag
    FROM <table_name>
    This bind parameter should be passed whenever you want to execute query for the table.
    Regards,
    Sandeep M.

  • My iPad will not charge and every time I charge it. It comes up with the iTunes icon and I will not charge, it is not a new I pad and the same charger I use for the I pad I use for my I phone and it will charge. What is wrong?

    My iPad will not charge and every time I charge it. It comes up with the iTunes icon and I will not charge, it is not a new I pad and the same charger I use for the I pad I use for my I phone and it will charge. What is wrong?

    What exactlyare you seeing on the iPad's screen ? If it's the iTunes icon and a cable then that means that it's gone into recovery mode - you will need to connect it to your computer's iTunes and you should be able to use that to reset it back to factory defaults and you can then restore/resync your content to it.

  • Wanted: Advise on a 32" HDTV model that will Display DVI HDMI correctly

    Morning all,
    I'm looking to buy a 32" TV on a budget of around £500 that will hook up correctly with my Mac Mini, using a DVI>HDMI cable. I don't really want to have to use SwitchX, although I am willing to if required if someone has settings that work. I'm limited to 32" by the size of my flat, so would really rather not go any larger.
    Ideally, I'm looking for a success story from someone who has a 32" TV that has got the Mac to display correctly on a model that is still available.
    I'll primarily be using the display for Front Row, but I do hope to also be able to perform occasional net browsing and itunes playlist creation on the TV itself.
    I'm hoping someone on these forums may have a suggestion for me?
    Thanks,

    Problems like that are caused by stray magnetism that cause misalignment of the electron beams from landing on the proper phosphor color. The set itself has a demagnetizer, but sometimes the magnetism is too strong for the built-in demagnetizer to overcome. But calling in a TV repair person to do a demagnetization is, I'm afraid, a throw back to bygone days. But that's what your TV needs.

  • Can't get a SWF that will display the content by itself

    Hi all,
    I was able to use the (for example) main.swf as a single stand-alone file until I upgraded to Cat CS5.5.
    Where is the output to just a basic SWF???
    They will display it with the associated html, etc. though in a browser.
    I am using the SWF as CD UI display in Director 11 or another SWF friendly platform.
    Is there something I did to make it change?
    Did they break this by design??
    Can I add some code? Remove code? to get it to display?
    Thanks,
    Jim

    Flash Catalyst leverages the Flex Framework. That is why there are all those other files in the directory when you publish. You will need to have them available for your project in order for the main.swf to work.
    Chris

  • Is there a debug or show option that will display ipx frame types being received at the router ?

    The show IPX traffic command displays a large amount of "format errors".
    I suspect there are a number of devices on the network that are set to "auto-negotiate" the frame type.
    Is there a debug or show command that would display ipx frame received that are not 802.3 ?

    There is indeed a way to do that.
    You have to first configure on your ethernet interface,
    4 sub-interfaces. Each of them with a different IPX encap and a different network number:
    int et 0.1
    ipx network 1 encap snap
    int ethe 0.2
    ipx netw 2 encap ...
    Then you enbable "debug ipx packet" and you will see
    all the IPX packets whatever the encapsulation is.

  • The BI report created by Query designer does not display all columns

    Dear Experts,
    I have created a BI report using the Query Designer.
    When I execute the query, only 6 columns have been displayed.
    The total columns are 12. I need to display all 12 columns at the first instance.
    Could any one help me to resolve this problem?
    Thank you very much!
    Arthur

    Hi Athul,
    Thanks for your reply.
    There is not marked for '.Supress Zero' in the Rows and Columns.
    And I did not check for 'Hide repeated values' in the Display tab.
    Any other place you could suggest to verify?
    Thanks
    Arthur

  • I am trying to create a button in flash that will display 4 separate images at the same time when clicked.  I can't get the images to stay on when I take the mouse of the button.  I need the actions script code to make this happen.

    I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time.  I can get the images to appear when I click the button but they will not stay on the screen.  I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code.  It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
    Thank you in advance
    AP

    It is not clear how you are trying to realize this from your description.  If you are trying to create this within a button symbol it will not work.  Explain your approach and if there is code involved, show what you have so far.

  • Looking for a whiteboard app that will display on iMac

    I am tutoring a student and what I am currently doing is creating worksheets ahead of time for him to work on. What I want to do is have him write on the iPad with a stylus or his finger to solve the problems I give him. I would like to create those problems on my iMac and send it to the iPad. This way I won't have to guess how many problems it will take him to learn the concept. I could have questions ready in advance and only give him what he needs. Then I would like to select problems for him to take home, but only if we were able to cover the topic during the session. Is there an app that will do this?

    I don't know about the "sending the problem" to the mac to to the iPad. But, I don't have a mac. As for the app, just get a cheap app that lets you draw.

Maybe you are looking for