Settings in R/3 for Interface

Hi, Please advise what are the settinings / defines to be done in SAP R/3 to set interface with external system in PP-PI? Please suggest. Thank You.

1. Kindly explain which if your external system /
2. How are we planing for interface ( IDOC, FTP) etc.
3. What Data you want to send ( master data, Transaction data)
we need to know the baisc things like above so that we can plan for hte same.
Reg
dsk

Similar Messages

Customizing performance threshold for interface utilization in LMS 4.0

Am running LMS 4.0, i want to customize performance threshold for interface utilization from the default 40% to x%, please help.

Based on your other post, I think you're talking about Device Fault management. You can go to Monitor > Fault Settings > Setup > Threshold Settings, and select the DFM > System Defined Groups > Interface and the interface type you want, then edit the thresholds for this group. Change the default utilization threshold from 40% to your desired value. Save your changes, then go to Monitor > Fault Settings > Setup > Apple Changes to apply them.

Central Excise and WHT Settings in CIN Version for 4.6C

hi sap gurus,
i need urgent support from your end regarding Central Excise and WHT Settings in CIN Version for 4.6C. I am new to CIN Version, and now i deputed to the same.
can any body give the configuration of the Central Excise and WHT Settings in CIN Version for 4.6C.
kindly revert back asap.
thanks and regards,
raghav

Hi
Go to transaction code J1iln you get all the details on CIN or you can go to logistics general > tax on Goods Movement in SPRO
Anand

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
This is a section:
May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 seconds

I've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X. They look menacing but are harmless.
You don't need any kind of security software.
Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize. If you are asked to enter an admin user name and password, DON'T. Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
Mac malware relies on social engineering. No amount of security/anti-virus, blah, blah, blah software is going to help.

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I wish to reset my ipad. However, when I selectGeneral Reset Erase all content and Settings, I am prompted for a a Restrictions Passcode (which I have never set). I have now entered random codes 11 times and the ipad not reset. How do I get past this?

I wish to reset my ipad (as advised by the Apple Store) to attempt to resolve an issue with a non-responsive part of the screen.. However, when I select General>Reset>Erase all content and Settings, I am prompted for a a Restrictions Passcode (which I have never set). I have now entered random codes 11 times and the ipad has not reset. How do I get past this? I am now at the point where I have to wait 60 mins before I can enter another random passcode. I just want the ipad to clear down, erase everything so I can start again.

The other option is to force iPad into Recovery Mode.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

Error message: Multiple definitions exist for interface

Hi experts,
I am developing a scenario that involves a BPM, that receives a certain abstract interface, and sends out another abstract interface.
I have created a service interface for the result abstract interface.
I have tested the before BPM and it worked, but now it has stopped working.
In the java ui no errors are seen, and the BPM activates successfully, but in transaction SXI_CACHE the BPM is in status 99, and in the activation log there is a message saying: Multiple definitions exist for interface [Name of the result abstract interface].
I have tried activating the service interface, the BPM, and doing a delta cache refresh, but it didn't change.
What can I do to solve this problem?
Thanks in advance,
Gershon Osmolovski

Hi Gershon,
Try following thing, might help.
Go to ID and check which communication component you have created. Check if there is any other inactive version of it. If it is existing.Delete it.
Edit and activate the original Communication component and do cache refresh.

What are the best settings to export video for Blip.tv?

I have CS5.5 and Adobe Premiere Pro.
Their suggestions are anything but helpful for Adobe:
http://support.blip.tv/entries/344530-how-should-i-export-my-videos-fo r-blip-tv
Thing is, I had Premiere Elements 8 and 10, which both had no issues with making and uploading MPGs, but Pro's settings are... well, I'd call them "messed up". Part of the issue might be that Elements and Pro ands unforgiveably disimilar in too many aspects (I'd argue 8 was functionally better than 10). Why are settings seemingly unavailable, or completely different? I wasted an entire day, rendering the same video in different formats, because Pro didn;t have the same available settings as I could with Elements 10.
Regardless of my complaints. The question is still this: What settings should I use for esporting videos to Blip.tv? The answer never really gets answered over there, but I am asking there too.
Ultimately, I'm sending MP4 videos, and they are absolutely fine on my computer, but are squished over there. So if anyone else has any more experience with Blip.tv, maybe they can answer it. They don;t seem to like Adobe/PC software much to care to give settings.
-Fes

Try a YT or Vimeo preset, adjust framerate accordently
I do not understand their field suggestions. Web is always no fields regardles the source.

The settings on the tab for "delegate" was not properly stored.

Hello group,
I try to write it in english - but it is a try only *g
Since last week I can´t set or delete any user or groups from the delegate tab.
Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
I´ve try to move the users to the IT OU but the problem is the same.
New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it.
Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
I´ve translate the error message with google language tools.
The settings on the tab for "delegate" was not
properly stored. List to send in the order can or can not activated will.
You do not have the required permissions to perform this operation with this object.
Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
Thx for any help!!
Kind Regards
Denis Ecklerhttp://www.ewig-drohendes-versagen.de
ICE 2009 I´ll be there -> http://www.ice-lingen.de/

Hi Denis,
At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
DSACLS “distinguished name of the user object” >acls.txt
Thanks,
Mike

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

Need help for interface to process employee expenses

need help for interface to process employee expenses
i have used the interface tables as
AP_INVOICES_INTERFACE
AP_INVOICE_LINES_INTERFACE
are they the right one
is there a concurrent program or any API for doing interface

hi,
i think what ever table are using for interfacing expenses correct.
but you have to enter invoice type as expense report.
Regards,
Srikanth

How do I save my CMYK font settings & make it avaliable for all files ?

How do I save my CMYK font settings & make it avaliable for all files ? (adobe PS indesign file)

Could you explain what you want to do a little bit better? CMYK and fonts aren't really related to each other.
Also, are you using Photoshop or InDesign?

Visual C/C++ code/Labview code for interfacing NI Hardware

Hi,
i need Visual C/C++ code/Labview code for interfacing NI Hardware and sample project example.

Duplicate - http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Visual-C-C-code-Labview-code-for-interfacing-...
You are just spamming now.

Resetting my network settings is asking me for a four digit password... i dont know it.

resetting my network settings is asking me for a four digit password... i dont know it

Connect the iPod to its syncing computr and restore the iPod via iTunes. If iTunes asks for the passcode and you can't enter the passcode, place the iPod in recovery mode and then restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Settings in R/3 for Interface

Similar Messages

Maybe you are looking for