Settings in The community

When I read a post I get email notifications. I only want notifications for posts I've participated in, authored, or want to follow. How do I make this happen?

Click on your "Welcome hpr3" link just under the Apple Support Communities heading on this page. Select Preferences. Set the switches to enable or disable notifications. Currently if you select the Notifications option you will get email from every community you are following whether you want them or not. I would disable that option. Only enable the option to be notified when you have answered a question.

Similar Messages

The Yahoo password in the mail settings of all my Apple devices has reverted to an old version and, no matter what I try, following advice from the community, it always returns to the old password. How can I solve this issue?

The Yahoo password in the mail setting on all my apple devices - iPad, iPhone 5, mini iPad - has permanently reverted to an old version. I have tried all the suggestions provided by the community so far but nothing works. When I delete the account and re-enter the details, the updated password is recognised and seems to save but, when I go back into the account, the old password is the one that is there.
I am desperate! How can I solve this issue please?

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

How to set up the communication channel for third party idoc

Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.

Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2 icloud just

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

Deployejb : Oracle 8.1.6 : Errors compiling the communication stubs

Hi,
I was able to deploy EJB using JDeveloper 3.1 in the Oracle 8i (1.1.6) DB.However, when I try it manually, it is giving errors.
I was able to use deployejb tool succesfully with Oracle 8.1.5 DB.Is there some problem with Oracle 8.1.6 DB?
This is output, I am getting :
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.....................................done
Compiling Stubs...Errors compiling the communication stubs
C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBHomeImplBase.java:24: i
llegal combination of modifiers: abstract and strictfp
abstract public class _OracleEJBHomeImplBase extends org.omg.CORBA.portable.Skel
eton implements EJBPackage.OracleEJBHome {
^
C:\sandeep\JDeveloper3.0\class\TEMP\EJBPackage\_OracleEJBRemoteImplBase.java:24:
illegal combination of modifiers: abstract and strictfp
abstract public class _OracleEJBRemoteImplBase extends org.omg.CORBA.portable.Sk
eleton implements EJBPackage.OracleEJBRemote {
^
2 errors
Is this a problem with the classpath/path settings?
Please advise!!
TIA
Sandeep
null

Thanks,I got it
-- Sandeep
null

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Users are having issues w/ the community page for pa.

It seems other users are having issues with accessing the community page for pa, as noted on
URL: http://www.dslreports.com/forum/r22862991-Any-else-out-there-having-issues-w-the-community-page-4-pa
Title/Location: DSLR (dslreports.com) Forums -> US Telco Support -> Verizon -> Verizon Fiber Optics -> Any else out there having issues w/ the community page 4 pa?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

This is what I told at the online chat..
Richardo: if some people can get to both URLs and others can only get to the new one that could be that the old one is being done away with or if not that then it would have to be the setting for those computers that are not getting to the old one.
Me: Like what kind of settings?
Me: I have, as you may know, A Static Public IP (IP, Subnet Mask, Default Gateway, and DNS Servers) as assigned by Verizon.
Richardo: that would be the settings within the browser.
Me: like cache, or proxy server for example... ?
Me: connection setting
Me: You do not need to tell me where these settings are, just what type of browser settings...
Me: Please, and thanks.
Richardo: the security , cookies, temporary internet files
[EDIT] My appolgies for Cross posting.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Communication determined by the communication device error

Hello,
I hope that someone can help me with this strange problem.
I am using my Mac book for 2 years, and one month ago something strange happened with my internet connection. This is the message that is appearing every time I try to connect to the Internet : "The communication was determined by the communication device, please check your settings and try again"
So, after that I tried to connect with the other Mac Book and the same error appeared..
We called our network support, they tried everything and nothing happened.
They even tried to change the modem, but it worked perfectly on their lap top.
Please help!!

We did a similar solution, but unfortunately don't remember the user-exit name. One thing is that it is an FI user exit which we used to intervene at the time of FI document creation and the design to convert the document date to pricing date instead of the posting date. It was applicable to exchnage rates too.
So carry out user exit search in the FI document creations area..

"Could Not Open the Communication Device" ???

I use a dial up connection. Everytime I try to connect to the internet, after it dials a message box pops up that says "Could Not Open the Communication Device". Has anyone else had this problem? And how do I fix it?
Please help me.

I found this in Mac Help:
If you haven't entered your network settings, open Network preferences, choose your modem port (internal or external) from the Show pop-up menu, and enter the settings provided by your ISP, such as the access phone number, your user name, and your password.
You can also use the Network Setup Assistant to help you enter network settings. Click "Assist me" in the Network pane of System Preferences and follow the onscreen instructions.
Also verify that the number you are dialing is correct.
Try this too.
Some ISPs may require a PPP connection terminal script to connect to the Internet using a modem. If it is required, contact your ISP for the terminal script
To use a PPP connection terminal script follow these steps:
In the Finder, navigate to the Library folder on your startup disk.
If the Library folder does not contain a Terminal Scripts folder, you will need to create it. Choose File menu > New Folder, and name the new folder "Terminal Scripts."
Copy the terminal script file from your ISP to the Terminal Scripts folder.
To activate the terminal script, choose Apple menu > System Preferences.
Click Network and choose your modem port (internal or external) from the Show pop-up menu.
Select the PPP tab and click the PPP Options button.
Choose your connection script from the Terminal Script pop-up.
Click OK and then click Apply Now.
If the Terminal Script pop-up menu is dimmed, then the script is not being recognized. Check that the script is valid, and it is installed in the correct location.
-Internet Wiz

Getting "Internet Connect Could not open the communication device"

I am getting a pop up showing "Internet Connect - Could not open the communication device."
Why is this? I have never got it before and after awhile my internet works just fine. I am trying to understand why it's popping up. The wireless networks I connect to are always working fine but my computer is just now giving me this pop up.
Please help. Thank you.
-Mike

you could try moving either file one at a time, don't delete them though
if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
possibly you'd need to setup your network prefernces again
also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
maybe check Network preference pane, see what shows up in Bluetooth

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

Client Settings Sharing the Same Priority

I have a dozen Client Settings and noticed that two of my Client Settings share the same priority (Priority 5) and one of them skips two priorities (10 & 11), see screenshot. Increasing or decreasing the priority
on these dose not seem to reset the priority number, i.e. if I decrease #9 it moves to #12 and #12 to #9 and the same if I increase #12. I was hoping increaseing #12 would reset it to #11 but that's not the case. The same goes for the two #5's,
they stay no mater what I do.
Anyone seen this? Any thoughts? I do not know if it is effecting anything and the 9/12 ones don't consern me as much as the two 5's do. I'm not sure which #5 has more priority then the other.

Hi,
I recommend you delete the Client Settings then recreate them.
Below is a workaround for your reference. You’d better call CSS first, as this workaround is not a supported configuration and not eligible for official support.
Connected to Database CM_XXX.
Run the following query :
select * from dbo.clientsettings
Take the Client agent setting's uniqueid
Run the following query :
Update dbo.ClientSettings set Priority=5
where UniqueID='{A38602E1-AEC1-43F9-B3E1-CF2155099D2E}'
Check the priority on the console now.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Best printer settings for the Officejet 8625 for glossy label printing

best printer settings for the Officejet 8625 for glossy label printing. The black does not appear dark black ......just shades of gray

pendavinci
Welcome to the HP Community Forum.
The following might be helpful to resolve the issue:
Printing Labels_Business-Cards_Cards
See the section on Printing and Printing Preferences
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

TS3988 Hi! I just upgraded my iphones to iOS5, and started iCloud... Now, on my iphones ( both of them!) my cousin's AppleID comes up when I want to update an app .... When I check the settings on the phones, it has MY appleID, but not for the apps? help

Hi! I just upgraded my iphones to iOS5, and started iCloud... Now, on my iphones ( both of them!) my cousin's AppleID comes up when I want to update an app .... When I check the settings on the phones, it has MY appleID, but not for the apps? help?

Welcome to the Apple Community.
Which settings are you checking, you should be checking settings > store

Badges on The Community!

We're delighted to announce that badges are now available on The Skype Community

Hi Lairdkeir,
Sorry to hear you didn't like the badges and notifications. You can configure your community notifcations settings here: http://community.skype.com/t5/user/myprofilepage/tab/user-subscriptions%3Anotification-settings

Settings in The community

Similar Messages

Maybe you are looking for