Settings manager panel does not show

my fp version:          10,2,153,1
browser:                  firefox 3.6.15
operating system:    windows 7 ultimate sp1 x86
problem:
the settings manager panel does not show
unistalled and reinstalled fp quite a few times, rebooted, used the unistall_flash_player.exe as well, no errors appear during installation or uninstallation, videos on youtube and other sites play just fine and noticed no other problems, also tried firefox in safe mode with all addons disabled etc nothing helps

also tried the thing with deleting the folder suggested but also had no luck
i found though that by trying this:
https://www.macromedia.com/support/flashplayer/sys/settingsmanager2.swf?defaultTab=g_secur ity
it doesn't work but if you try the settings panel afterwards, it might work,
i also found that going through the pages of adobe.com or google to find the settings panel the address looks like that:
http://macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.html
and if the settings panel is empty
then you can add "www." before macromedia.com, i.e. like that:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
and at least in my case it works!!!

Similar Messages

Extract panel does not show in Dreamweaver CC 2014 - using Mac - Why?

It is odd - as I used the Extract workspace, the Extract panel does not show - not even if I try opening it via Window -> Extract.
I have updated my Dreamweaver 2014 to the most recent version.
Can anyone help me?

Good to know that your issue has been resolved.
To further investigate why that issue happened we would need some more information from you.
Please tell us more about the settings of DW before applying patch
> Which workspace you were working before applying the patch ?
> What all panels were ON before applying the patch ?
> Did you perform any specific steps before applying the patch ?
> What is the version of your Mac ?
> Any extensions of DW installed?
Thanks,
Lalita

Ipod touch, web gallery, movies panel does not show in safari

i have some movies in my web gallery published from imovie08.
ipod touch safari will not display the movies panel of my web gallery, only the pictures panel.
however, i have a movie embedded in one of my picture albums which will play. so i know that it will
show movies.
anyone know why the movies panel does not show?

To get pass the passcode lockscreen, recovery mode and restoring should help: iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.

Settings Manager box does not display

I recently uninstalled flash player and installed the latest version. Although flash player works fine, the Settings Manager box does not display. I only have this problem on Firefox 3.6.10, it works fine on IE 8. I am running Windows XP 32 bit.
Flash10k.ocx 10.1.85.3
NPSWF32.dll 10.1.85.3
I have tried uninstalling, rebooting, reinstalling. I have also tried disabling AV and firewall.
Although I cannot see the SM box, I can right click on the white space to access the local settings. Turning off hardware accelleration did not help.
I have also checked for updated display drivers, none available.

I can't really help, just want you to know you're not the only one with this problem. Just saw another thread with the same.. and well.. got the problem here as well.

Execution results panel does not show deleted records

Hi,
For OWB 10.2.0.2, i can succesfully run the mapping. But the Excution Results panel does not show deleted records. Shows 0 eventhough it actually did delete the records.
Does anyone have suggestions?
Thanks,
Raj

Hi,
According to your post, my understanding is that you saw the different results for everything and people search tabs.
It is by design in SharePoint 2013.
There are four search experiences that are available on a default enterprise Search Center results page. Each search experience uses a different result source.
Everything search experience use Local SharePoint Results sources.
People search experience use Local People Results sources.
Local SharePoint Results specify all items from the local SharePoint search index except People items.
Local People Results specify People items from the profile database of the User Profile service application.
More information:
Understanding result sources for search in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

My settings "general". Does not show a"update software " choice from the menu?

My settings "general". Does not show a"update software " choice from the menu? I cannot find what iOS software I'm currently using or what iPad I have

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Control panel does not show the home page when Newsstand app is open - could this be a bug?

When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?

Zephuros2000 wrote:
I press the home button twice to access the control panel ...
Pressing the home button twice does not access the control panel ... at any time.
To access the control panel, press the home button once to get to the home screen. Then swipe up from down near the home button to view the control panel.
Pressing the home button twice generally shows you the apps that are running.

Layers Panel Does not Show Layers

Using Illustrator CS6 on Mac OS Yosemite. In the layers panel, it only says the number of layers I have (e.g. "2 Layers"), but will not show me the layers. I have tried everything I can in the Panel Options and it will not show any of these columns: A. Visibility column B. Edit column C. Target column D. Selection column
How do I get the layers to show?

Moonbelle,
I assumed you had just upgraded the OS and thought the (three step) reinstallation was missing. Otherwise, I should have suggested the full list of things to try in case of such strangenesses, see below.
As you can see, the list starts with some easy ones, including the one you used. Sometimes, a corruption may arise, seemingly out of nothing, and in the luckiest cases it is temporary enough to cure easily.
You may remember the list if something similar happens again.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

[bspwm] panel does not show up

I did everything in dummies guide on https://github.com/windelicato/dotfiles … or-dummies
Until I tried bspwm I used dwm's integrated bar with piped conky and dzen2, so I'm still figuring out how to configure panel.
It does show up on panel & when I run it from dmenu or uxterm, but on startup there is no panel.
Lemonbar throws me error cannot load font terminus, even terminus is installed, and font path is set on startup in .xinitrc
So, here are my configs:
panel_dzen2 http://pastebin.com/abteKxLp
(roboto font is installed)
bspwmrc http://pastebin.com/Cwp9hruY
.xinitrc http://pastebin.com/7SzrFnMV
/etc/profile http://pastebin.com/v1ZGLr0c
panel http://pastebin.com/8uRxyG3g
ss
Scripts are executable.
Thanks in advance.
Last edited by Reznor (2013-10-10 10:02:50)

Quick edit: Turns out it's actually showing, but is all black. Seems like hex-colors specified in panel_colors are not understood by bar and all default to black
Last edited by minze (2014-12-20 17:04:55)

TOC panel does not show

I use RH X5 with Windows Vista Business. If I compile and
show a project inside RH the left panel always appears ok, after
returning "yes" to the Windows question about allowing blocked
contents. But if I call the published project inside the Output
folder, the left panel disappears. Hope someone can help.

Hi there and welcome to our community
You likely aren't missing any setting. What is probably happening is that you are using the wrong type of link to open the help.
If you open only a topic that is part of a larger help system you normally see the "Show" link. If you wish to see the full frameset, you need to link to the start page of the help. As you are using the Pro output, you may also need to adjust your Window settings found in the Project Set-up pod.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Lightroom 5: AppleScript: action "AXShowMenu" in Smart Collection panel does not show context menu

We are developing a simple automatization tool using Lightroom 5 (the newest version of the CC) using AppleScript.
For some actions, we need the context menu in the Smart Collections panel, for example to import Smart Collection descriptions.
According to the documentation and various sources on stackoverflow and elsewhere, AXShowMenu should bring up that menu.
So far, I have not been able to make that context menu pop up.
Using UIElementInspector and UI Browser, I located the element which does have the AXShowMenu action attached. Based on the code provided by UI Browser, I got the following script, which I run from the Applescript Editor:
tell application "Adobe Photoshop Lightroom 5"
activate
tell application "System Events"
tell process "Lightroom"
set frontmost to true
perform action 1 of static text "Smart Collections" of group 1 of row 11 of outline 1 of scroll area 1 of window 6
delay 2
end tell
end tell
end tell
tell application "AppleScript Editor" to activate
Note that if you try to recreate this, the number of the window as well as the number of the row may be different. Also, the last line is just convenience, and not really relevant for the code.
In the Results window in AppleScript Editor, I have the following:
perform action 1 of static text "Smart Collections" of group 1 of row 11 of outline 1 of scroll area 1 of window 6 of process "Lightroom"
--> action "AXShowMenu" of static text "Smart Collections" of group 1 of row 11 of outline 1 of scroll area 1 of window 6 of application process "Adobe Photoshop Lightroom 5"
which means that I did invoke the action.
But … nothing happens.
Any insight, workaround etc. is highly appreciated.
Thanks in advance.

Just for the records, I did ask the same question on Stackoverflow, and there I got an answer which does work. This solution uses a little Python program to really simulate mouse clicks.

Output Panel does not show

I'm trying to Output to PDF from the Bridge CS4.
When I click on the Output button to get the Output workspace, no Output panel appears on the right. In fact, I cannot find the Output Panel at all. It is supposed to contain the buttons to create a PDF or Web Gallery, but the buttons are not there. I downloaded the updater for Mac, rebooted my computer, but still no Output Panel. If I choose Window > Workspace > Output, no Output Panel appears.

Jay,
Here are a couple of things to try:
* Windows > Workspace > Reset Standard Workspaces
* Bridge > Preferences > Output > Reset Panel to Defaults
* Trash Bridge Preferences by holding down the Option key as you launch Bridge.
One of these actions might do the trick.

I can't find my Bookmark manager- it does not show up as shown on Firefox Tutorial - Where is it? I can therefore back up bookmarks

I am trying to back uo my bookmarks.
I have gone to the Firefox tutorial & it refers to a Bookmarks manager option falling under" Bookmark this page"
My second caption is "subscribe to this page " and is not an option available
How can I get to the Firefox Bookmark manager ?

Bookmarks > '''Organize Bookmarks''' -> Import & Backup

Extension Manager CS5 does not show Digital Publishing extension...

... even though the extension is installed for InDesign CS5 and operating normally.
I've tried trashing the EM prefs file but that doesn't seem to make a difference.
Have reinstalled extension several times.
Any insights are appreciated!

Digital Publishing extension has its own installer, it is not a ZXP or MXP extension. Extension Manager cannot manage it.
Extension Manager preference file only records the size and position of window, which product and extension are selected when exiting EM last time. It has nothing to do with displaying this extension or not.

Settings manager panel does not show

Similar Messages

Maybe you are looking for