Settings needed

Hi guys
We have a strange request from our client in our project. They insist that they need an additional client in SRM and ECC of QAS with new data to be tested. Server is same but just a new client.
What are the settings needed from XI side ? I have completed creating Technical and Business systems for the new client in SLD. I also understand that we need to create RFC Destinations between XI , SRM and ECC in all the scenarios in all the three servers including XI QAS.
Apart from that do I have to create anything more? Logical system, Port, Partner Profile etc for Idoc Transmission from ECC to SRM, are they client dependent ?
Again in SLD, I have grouped the Business systems into two and now the name of systems change when I transport. I mean ERD bceomes ERQ in QAS. So now I have a problem. If I edit the groupings and add new Quality Systems, it wont show to old clients in QAS.
I guess I can ONLY use either the old client or the new client in ECC and SRM for connecting to XI. Is my understanding correct ?
Regards

Hi Ajit,
Right now when I transport a scenario from DEV to QAS, if suppose BS as are ECC_DEV_100 & ECC_QAS_200, when you do transport from DEV to QAS, the BS systems are get changes from ECC_DEV_100 to ECC_QAS_200 as per Grouping in SLD.
You need to have another client in QAS for testing of interfaces, so create another BS ex: ECC_QAS_210 in SLD and get BS from SLD into ID and do your Interface configurations for new BS ECC_QAS_210.
For ex: File to IDoc scenario, then you should have 1 RD, 2 ID, two receiver agreements and two receiver Idoc channels which points their respective clients.
We had similar kind of situation in my project and tested the interfaces using diffrent clients in QAS. here the KEY is you need to create configuration objects for BS ECC_QAS_210 for all your interfaces where BS ECC_QAS_200 exists.
If you are doing testing of Inbound interfaces with 200 clnt then the receiver system as ECC_QAS_200 in RD else testing to 210 clnt then receiver system as ECC_QAS_210. You need to change and activate RD as per your testing client of QAS.
Cheers
Veera

Similar Messages

Basic configuration settings need to be done in ABAP-WebDynpro.

Hello Friends,
Any Basic setings need to done in the configurator to run WebDynpro-ABAP smoothly, settings like http time out parameter.
Cheers,
Sam

Hi Sam,
The basic FQDN settings need to be done to run the Webdynpro Abap..
Here's the link regarding it,
http://help.sap.com/saphelp_erp2005/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

What settings need to be adjusted to send out Dolby digital ,DTS from inputs such as Netflix to the video output via an adaptor to HDMI?

Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?

The Audio Midi Setup utility may need to have its settings updated.
That's if you have the right adapter:
https://discussions.apple.com/docs/DOC-2821

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

My client Portals links are working only on intranet, what kind of settings needs to be done to work on internet

Hi Experts,
My client Portals links are working only on intranet, what kind of settings needs to be done to work on internet.
Thanks,

HI Sree,
I had the same problem in my client. The solution is you need to publish the URL to the internet and maintain the host name at the hosting server.
If possible talk with the IT Network guys and they can help you.
Something that i can help you.
regards,
S.Saravannan

Minimum settings needed in unattend.xml file

Hi,
I would like an answer file to handle the minimum settings required for an SCCM 2012 operating system deployment of Windows 8.1 Enterprise 64-bit. Many of the examples I have seen include disk partitioning, language settings, enable the local admin account
and set password, allowing the admin account to login a certain number of times and so on. Task sequences handle most of this so I don't think I need everything suggested in the default recommendation that I have seen in many places including TechNet.
I don't feel like I need the disk partitioning recommendations in the answer file because the task sequence is already handling that part. No need to have this in the answer file, right?
I only need to deploy the English version of the operating system. My understanding that is if you don't use any language settings, the installation defaults to English. Is it safe to leave this information out of the answer file?
Does SCCM need the answer file to specify the number of times an admin can login to accomplish the OSD?
I think it would be necessary to maybe accept the EULA. I want our support contact information to appear in System Properties. Set the registered owner/organization.
My initial answer file was causing problems so I haven't been using one at all until a new one is created that won't cause OSD problems. Here is what I have set so far but would like to trim this down as much as possible:
1 - Windows PE: Set language to en-US and accept EULA
3 - Generalize: DoNotCleanTaskBar = True (not even sure what this does)
4 - Specialize: Enable Admin account, Set IE home page, set language to en-US, set OEM support info, DisableSR=1 (not sure what this does).
7 - oobeSystem: set language to en-US, set AutoLogon and Admin password, HideEULAPage=True, HideLocalAccountScreen=True, HideOEMRegistrationScreen=True, HideOnlineAccountsScreen=True, HideWirelessSetupInOOBE=True, NetworkLocation=Work, ProtectYourPC=1.
Could someone tell me how much of this is unnecessary for SCCM 2012 OSD? I'm pretty sure I don't need everything that is here because the task sequence covers part of these settings. What are the minimum settings needed here?
Thanks,
Rob

We were deploying Win 8.1 for a couple of months without an answer file but that doesn't help when you want certain things configured that an answer file will handle. My first answer file had too much going on and Win 8.1 didn't like it much.
My new answer file now sets our support information and registered user/org. Works like a charm.
EULA is being accepted, local admin is enabled, partitioning is being done correctly; all without the answer file handling it.

Address Book on laptop is corrupt: which settings need to be reset?

The Address Book on each of my 2 laptops is corrupt (i.e. the AB when opened quits unexpectedly, without giving much options other than Report to Apple, and quit). But the Contacts data on MobileMe (and on the iPhone) is correct. I'd like to delete any and all of the sync settings on the laptops in order to start with a new and emtpy Address Book which then should be synced (and repopulated) with MobileMe. (I have saved the MobileMe data as V-cards by choosing all contacts and exporting and saving them in a vcf file format; I fear that I am loosing ALL group data this way!?).
Here my questions:
1. To get a "clean" slate for the address book and the syncing process, which databases and sync settings on the laptops do I need to delete and in what order? And much less importantly:
2. How can the group data on MobileMe be saved/retained?
Thanks for any advice. Cheers, Veit

I think that you are right with your diagnosis that not the AB is corrupt, but perhaps the data, because:
1. the problem occurred at the same time on my wife's laptop and on mine.
2. although I re-installed the AB from the OS X disk with the help of the Pacifist application (see the thread below), the problem has not disappeared.
I also was able to eliminate synching issues as the root problem: I used a previously saved backup AB (not entirely current, of course) and could sync with MobileMe (replacing the data there, which I had saved in a .vcf file). I now seem to have a working AB which also syncs, BUT, and here comes the puzzlement: all contacts seem to be there, even all groups, BUT when I want to resize/enlarge the window to cover the whole screen, then the AB freezes up, the window becomes white and empty and after a while AB quits entirely on my laptop with no further notice, and on my wife's laptop gives me a message that AB quit unexpectedly (with a Relaunch and an OK option, but the relaunch produces the same results). Is there any explanation for this, that resizing produces a freeze and inadvertent quit? Is there a preference or settings file burried out there that interferes???
Somehow I have a hunch that the real culprit could be the groups which I had created, since I had noticed some strange results in these groups earlier; some groups were created by me, some are logically determined so called "smart groups". I wonder if I were to delete these groups in MobileMe (which of course I'd hate to loose) and re-synced whether the problem would disappear.
Your suggestions, to add .vcf cards one by one is appreciated, but I don't have them one by one, only ALL contacts in one single .vcf file; (furthermore with some 1500 contacts that would take forever).
I am wondering if you or anyone who follows this thread has suggestions how best to proceed. I am willing to try out any approach.
Thanks in advance, Cheers, Veit

Use Mobile Data For: Settings - Why does Settings need a cellular data connection?

iPhone 5 iOS 8.1
Settings > Mobile > Use Mobile Data For: Settings
Just curious, why does the iPhone need this turned on? Why does the settings app need a cellular mobile data connection?
If you turn it off, you're pestered to turn it on every time you go into settings?

Because, that's the way Siri works...it needs an Internet connection...requests are sent to Apple's servers. No Internet, no Siri.

How do I create the highest quality pdfs with InDesign CS5 and Acrobat Pro 9? New settings needed?

I sent a lot of jobs to printing companies by sending them high-res proofs on very large, multiple page jobs with lots of photos and graphics. Many companies are requesting that I just send pdfs. I just upgraded to Windows 7 and CS5. I used to have some special settings in my older Acrobat Distiller and InDesign which have been lost. They gave a much better result that what I seem to be getting from the "Press Quality" setting for pdf's. Does anyone have an excellent list of settings that can used to improve the quality of pdf's? I don't know if this is a combination of settings in both InDesign itself, as well as in Acrobat Distiller, or if the settings in one program will solve this. I have a job pending that needs improvement in the pdf quality. Thank you.

Thanks Peter. My last post was specific to using the Print Booklet feature (which is now solved thanks to your help). But this is related to creating high-res pdfs in general that go to printing companies, and being used for sending high-res proofs to clients. In general I don't need to set up printer spreads for my jobs (just for the one I asked about in my other post), but I used to have some specific settings that a printing company supplied me with to give the highest res pdf output possible. Those settings did in fact give a better result than the Press Quality settings built into my Adobe programs. I have had printers over the years request that I create a postscript file, then use distiller (using the settings they supplied) and I got an excellent result. After getting a new computer, Windows 7 and new CS5 and Acrobat Pro 9 upgrade, all of these settings were lost. I have notes on the settings from a couple of years ago, but they don't seem to apply to the CS5 programs in every given area and I feel like there may be just a couple of boxes that either should or shouldn't be checked that I'm missing now.
I understand that this is very specific information, and I may just need to go with the Press Quality settings. The printing company that gave me that great info a while back is no longer in business and other printing companies I have checked with won't spend that kind of time with me (or maybe they don't know anything other than using the Print Quality setting). Maybe within the CS5 program now, the quality of this setting has been improved more than I realize yet. Again, I'm new to CS5 and am just trying to get everything back to the way I used to have things running, and trying to get the best results possible.
Thanks again!

Belkin Router Firewall Settings - Need Help Please

Hi
I'm new to Apple and love the machine, but I am having a problem with the firewall on my router. Let me explain the setup, then the problem...
I have the following in my home network:
1 hp desktop running Windows XP Media Center Edition, SP3 (Professional)
1 Belkin wired / wireless router
1 Canon Pixma MP500 Printer set for Sharing (Connected to hp desktop through USB)
1 iMac 20" running Leopard OS
The hp desktop and the iMac are both hardwired to the router. The router's security settings are as follows:
Will NOT broadcast the SSID
Mac Filtering is ENABLED (iMac MAC address is included in list of allowed connections)
WPA-PSK Security ENABLED
Wireless connectivity is ENABLED (For Wii, PSP, and Xbox 360)
Now the problem...
Everything on the network works beautifully, except the iMac. It will not allow iChat services, will not allow sharing of the desktop with other iChat members. It does, however, connect to the internet, but will not access the hp shared folders or printer. When I attempt to even add the printer, the printer does not even show up. I DO have Bonjour installed on the hp, but when I run Bonjour, I get a message that reads something like, "There are no Bonjour enabled printers available."
I know it is the firewall built into the Belkin router because I placed the iMac into the Demilitarized Zone, and everything started working as expected. For those of you not familiar with DMZ on the router, it basically allows you to pick an IP address to place outside of the firewall, so you can keep the router firewall enabled, but you can choose an IP address (i.e., a computer) that is not behind the firewall.
After placing the iMac in the DMZ, I went to add the shared printer on iMac. Not only did it show up immediately and give me the ability to add it and print to it, but I could also browse shared folders on my hp. I was also able to connect to a friend on iChat, and we were able to share each other's desktops.
Before placing the iMac in the DMZ, I opened a couple of ports (I don't recall which ones at the moment), and I was able to get iChat AV to work properly, but could not get the shared desktop feature to work. I believe if I had a comprehensive list of ports to enable, I could get this issue resolved, but I can't seem to find such a list anywhere on Apple's web site (or any other web site for that matter). Do any of you have such a list of ports??
I can provide more information if needed, but any help on this matter would be greatly appreciated.
Thanks a lot in advance for your help.

Thank you, Larry.
I found a soft copy of the Belkin router's setup instructions on-line. I am going to enable the UPnP feature, as the manual indicates that it is necessary to have this feature enabled to do the things I want to do. The manual also indicates that the router ships with this feature disabled by default. I have not had a need to enable the feature when I had two PCs, so hopefully this will solve the problem.
In either case, thanks for directing me to the common ports. If enabling the UPnP feature does not work, at least I can see which ports I need to enable.

What settings need to be set for the fastest roaming on my wlc 4404

Hi all
I notice that on my WLC 4404 when walking around with my laptop, I am dropping pings when it roams to another access point, Is there anything on the controller I need to check, and can I optimize these settings for roaming?
cheers
carl

Hello Carl,
to have romaing working fine you need to be sure of following:
1) RF designed correctly , and enough overlapping is availble between the AP's.
in addition for environment to be free from external noise..
this can be confirmed with spectrum expert site survey
2) what authentication and encryption used ( WEP , or WPA-PSK no need to check this point ->> skip :-) )
if you are using any authentication like 802.1x ->> then enable CCKM on the WLAN to make more seamless roaming.
3) if more than one WLC availble on site , configure mobility group between them,
so if client roam from one AP in WLC 1 to AP on WLC 2 ->> no disocnnection observed....
Kind regards
Talal
===========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily

BAsic settings needed in system crm-2007 in newely installed

HI all
I have small quesry here.i Have a system newley installed crm-2007
can you all please tell me what settings do i need to do to start working with..either marketing or service.
as per my knowledge what i know is...navigation bar profiles,business roles,organisations etc....
but i dont know how to do all those..is there any document for this..or else pls guide me for this..

Hi Ram
Refer to SAP Note 1229931, this is the main note for CRM 2007.
It would be very difficult to put down everything you are required to do in a response, work through the attached note with guidance from the SAP Best Practice Building Blocks as specified.
Regards
Arden

Copy control settings needed for order related billing

hi,
sap gurus,
please provide the copy control settings related order related billilng and order related proforma invoice.
thanks in advance
regards,
balaji.t

Dear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U

What settings need changing to keep tabs when firefox closes?

What settings do I need to change to keep my tabs when I exit Firefox as this has stopped now I have upgraded to Firefox 4?

If you didn't do that yourself and nobody else has used the computer then an extension may have made that change.
I see in your list that you have some Norton extensions (toolbars) installed that could cause it, but others may do this as well.
* [[Troubleshooting extensions and themes]]

Settings needed

Similar Messages

Maybe you are looking for