Settings NOT saved for the iPod, because- not found
I've a lot of regular changes to make when updating my music library on my iPod. But when I'm in the middle of doing so - that is using TAB "Music" (which "Sync Music" enabled) - and checking all relevant playlists, an error appears:
"The settings were not saved for the iPod “<my iPod name>” because it could not be found."
I don't know what to do because the only related articles all dates back to… 2007! That's 5 years ago!!!
Of course I tried all the solutions of 2007, and when I do other errors occur like:
"iPod sync failed" OR… my iPod simple disappears from the list (and even DEVICES doesn't shows up anymore in the left pane).
THANKS for helping me.
Can you post a link to the article you are referring to?
I assume you have tried using a nother USB sync cable to help rule out the possibility of a faulty one? What about plugging the iPod into a different USB port on your Mac?
It might help to remove any other USB devices you have connected to the Mac. Then reboot the Mac as well as your iPod by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. Then try to resync.
Could you provide the full text from the error messages you are referring to?
Make sure you are running the latest version of iTunes (10.6.3).
B-rock
Similar Messages
-
What should I do to connect to my iPod?
- Are you updating clicking on the update button in iTunes?
Try a reset. Nothing is lost.
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try deleting file and try again. It is located:
IPSW file location for Mac and Windows -
At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?
See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one. -
Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." However, when I follow these instructions, delete the backup and try again - I get the same message. Any ideas what is wrong?
Hi,
Try this thread. https://discussions.apple.com/message/12661408?messageID=12661408
Carolyn -
The app was not installed on the iPod because you are not authorized for it on this computer
Im trying to put a game onto my iPod touch but a message popped up saying "The app was not installed on the ipod because you are
not authorized for it on this computer. So i tried to look for an answer to this problem and i found one saying you have to go into store
at the top and authorize so i did and it says ive already authorized it cuz i did it last night please help ME
P.S. I restored it last night just saying to see if maybe it has something to do with that?You need to authorize the account on the computer:
Store>Authorize ths computer
Hope this helps -
I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!
See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account? -
i have been trying to figure what the problem with my ipod touch is, im downloading songs from a different source and not itunes store, recently i have had a msg being displayed at the end of synching 'some of the items in the iTunes library were not copied to the ipod because they cannot be played on this ipod'. however the songs play fine in itunes.
i have re-installed itunes several times, deleted all my music and iported it again. retored my ipod and still i have the same msg. its only stating 8 songs so far that cannot be copied onto my ipod. please can someone help as ive tried everything that i can possibly do. thanks.Hello mobyash,
Have you tried converting each of these 8 tracks to a different file format and seeing if they will then sync to your iPod. See this Apple support document for information and instructions on how to convert a song to a different format.
iTunes: How to convert a song to a different file format
B-rock -
it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help
Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
"Some of the items in the iTunes library were not copied to the iPod because they cannot be found....94 total problems"
I keep getting this everytime I plug in my iPod ....I really dont want to lose NINETY FOUR songs, as these are the most played ones! I don't know why it's doing this and its freakin annoying!
Can anybody PLEASE help me?????Thanks for the answer, but this is not a nano, it's a 5th gen 60GB wth video.
http://support.apple.com/kb/ht1353
Disk use is already enabled and I manually manage my music. -
I get a message when downloading video to the Ip[od: "I tunes could not back up the Ipod, because a session could not be started with the Ipod." What does this mean? What can I do? I cant put in any video. HELP!
I get these issues too, Even with a restore?
I work around it, (and would appreciate feedback on if this works for everyone) by :
Right clicking device in iTunes and selecting "backup", I then get the error; I quickly "ok" the error, then select "backup" again, then I often get the error a second time, but on the third attempt (in very quick succession) of selecting backup, the task initiates, and completes successfully!
Exactly the same for a restore!
Did this work for you? -
It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?
As the linked articl says, place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I get this message when syncing my Ipod touch "itunes can not back up the ipod because a session could not be started" any ideas?
Have you looked at the previous posts on the right side of this page under the heading "More Like This" with your same problem?
-
I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
How to resolve "movie was not copied to the iPod because it cannot be played on this iPod".
how to resolve "movie was not copied to the iPod because it cannot be played on this iPod".
See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: Sync purchased HD videos to iPod or iOS device
iTunes says my purchased video isn't...: Apple Support Communities -
Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!
Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406
Maybe you are looking for
-
I'm having a problem with the registry and iTunes.
Vista stopped seeing my DVD/CD drive the other day, so I went to the registry and deleted the high and low pass filters for the drive. This fixed that problem. Only problem now was that none of my programs would see the drive, so I had to reinstall a
-
Can someone look at this (repost for attention)
Jeff Dalgliesh ([email protected]) unregistered posted January 28, 2001 10:47 PM On the "Oracle Portal Navigator" page under the "Content Area" tab someone deleted the "Site" portlet. How do I add the "Site" portlet back to the page? I clicked on the
-
How can i create the master customer data
Hi friends, I have one requirement here, I have to create one master database(MDM) start from very scratch on wards. My question was 1. How can I do start with this. 2. What are all the software requirement 3. Are there any examples (video's are ther
-
This is odd, I changed the resolution of my MAC MINI. Then te TV says back: Display not supported but the MAC does not go back to the previous setting... What should I do to solve it?
-
Gradient fill angle snaps back to - And Undo and history are buggy.
Just installed Adobe Photoshop CC suite on new Mac Pro, Maverick OS, equiped with Waccom Tablet. Issues: Gradient Fill on Shape layer refuses to snap to entered angle. It simply returns to 0 Double click the layer type -90 Layer rotates in preview. C