Settings Portal eventing - WebDynpro for Abap iView communication

To connect two WD4A's using portal eventing; what work is to be done inside the portal environment.
All manuals on SDN provide information action to be done within WD4A, Do we need to configure/set values in the Portal environment at al...

Hi Marco,
Check the url:
[help.sap.com - Client-Side Eventing|http://help.sap.com/saphelp_nw70/helpdata/EN/ce/3e98408d953154e10000000a1550b0/frameset.htm]
Best regards,
G. Leurs

Similar Messages

Who can tell me how to find the leave request Webdynpro for ABAP iview

Hi,Expert,
As I know Portal only has Webdynpro for java iview for leave request iview in the past.
but someone tell me SAP portal has delivered some new standard WebDynpro for ABAP iview.
I have a requirement to create a employee role for new Leave Request service created by WD ABAP . Under Content Provided by SAP in Content Administration, I couldn't find the iView assocated to the leave request except the Java one. Is there have any Employee Self-Service Web Dynpro ABAP workset ?
thanks
Olivia

The business package for ESS based on Webdynpro for ABAP is available only for ECC 6.0 EHP5.
If you are on EHP5, you may choose to use this version of the BP.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/340b0507434193adbfe3f8fc8896c7/frameset.htm
Leave Request application:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/1f/a073be62744fcca7e1fae9942f0031/frameset.htm
Thanks,
Shanti

Portal using Webdynpro for ABAP

Hi Gurus!
    I am using one portal using 'Webdynpro For ABAP'. It contains Contextual Panel as well as ViewUIContainer. Contextual Panel contains all the reqd options available for user; while ViewUIContainer contains diff views as requested.
   Now, I'm trying to make a copy of that Webdynpro with some other name. What happens is --
Application is not there and when I try to make one - it says
"Interface View Does Not Exists."
Further, when I try to make an Interface View with the new name - it says
"Interface View Does Not Exists."
   Therefore, what I could conclude about the case is -- may be Interface View is default to certain Webdynpro components/interface. Hence, my question is how can I make use of same webdynpro application with some other name. This requirement arises due to the fact that we have to add some more functionalities to that and I dont want to play with the efforts made so far.
Kumar Saurav.

Issue Resolved.
Kumar Saurav.

WebDynpro for ABAP iview

Hi All,
In my client portal there is no iview template of type "SAP WebDynpro iview" .
I created one from the list of PAR templates of type com.sap.portal.appintegrator.sap.WebDynpro
and embedded it in a webdynpro proxy page
i have given the following parameters.
Application
Application Namespace
configuration name
platform 'webdynpro for ABAP'
WebDynpro client 'plain HTML'
system
But at runtime when i login with the end user it gives a blank page.
Please advise.
Thanks,
VV

What happens when you try to test the same application you put in the iView from SE80. Sounds like the developer of the application might have forgotten to embed their default view in the window. A very common mistake on older support packge levels before the workbench started embedding the default view automatically.

Webdynpro for ABAP iView personalization not sticking?

We are currently on EP7 and are having a very odd issue with ABAP Webdynpro iView personalization.
For our Java Webdynpro iViews, we have used iView personalization quite a lot to change field labels, add text, change button text, etcc. all via portal content administration (ctrl+rightclick to make changes from iView preview). These changes would show as custom iView parameters settings on the Java Webdynpro iViews. Then we could put these iViews into our own portal packages and move them to other portals (QA, Production, etc).
However, this is not working quite right with our ABAP Webdynpro iViews. We personalized an iView on our DEV portal. The personalization changes showed just fine for all users (ie. changes to input field labels). However, no new parameter settings show for the iView for the personalization. Also, after packaging, exporting and then importing the iView into the other portals (like moving from DEV to QA), the personalization is gone. We had to manually recreate this on the QA system. However, we do NOT want to do this on the production portal of course nor do we want this to be the method/solution going forward.
So has anyone seen this? Is this some issue/difference between the ABAP and Java webdynpro iView templates?

If it is WebDynPro ABAP iview, if you do the personalization, then your personalization is persisted in ABAP stack. You need to transport it in ABAP i.e R/3 development system to R/3 Quality system. Transporting only iview is not enough.
Note : If you do the personalization for the ABAP iview, it will not be saved in the portal, it will be stored in the ABAP stack.
Thanks
Manoj K

Back in a Webdynpro for ABAP Iview..

Hi.
I've a Iview type Web Dynpro for ABAP. I've a link to back previous menu links or previous Iview, but I don't Know how do it. Also, I've a link to employee self service page initial. How I cant put the code into my links for that the link go to that pages?
Thanks.

Hi,
If you have two views v1 and v2, you need an outbound plug in v1 and inbound plug in v2. In the window when you embed both views, you need to create a navigation link between the plugs. Now when you click on the link to go to v2, you should fire the out bound plug. You can do this using the code wizard.
Now to come back to v1, do the process in reverse. create an outbound plug in v2 and link it to an inbound plug of v1. On click of the back button, fire the plug. If you have links, create them as LinkToAction UI elements. In the onAction event of each link, write the code to fire the corresponding plugs.
Regards
Nithya

Saving ALV settings in a Webdynpro for ABAP.

Hi there,
I would like to modify from code side the standard filter settings after user selection, i mean:
i) User adds the filter fields it wants using ALV standard filter settings.
ii) I add via code an additional field to the filter criteria selected by user.
I have done that using if_salv_wd_filter~create_filter_rule ( ) but this only affects to the current filter applied and, what i would like to do is adding my new entry to the saved filter rules (i do not want to add my new filter rule to the current ones, i want to add it to the saved ones).
The functionality i want to achieve is to display a filter header in the ALV (for a field that has not been specified by the user) when the WDA is opened with an initial saved setting profile.
Is this possible? any suggestion regarding modification of saved filter profiles?
Thanks in advance
Edited by: Vicente Ángel López Romero on May 27, 2008 4:02 PM
Edited by: Vicente Ángel López Romero on May 27, 2008 4:04 PM

Hi Durga,
I am afraid that these can not help me :(. The link you have provided refers to information regarding ALV Grid, and i think that there are many model design diferences between ALV Grid and the Abap Webdypro one.
Anyway i think that the filter settings that can be modified via source code are always related to "on air" filter criteria and i want to modify the "persistent" saved settings profiles.
All in all, it is a very interesting document in order to implement commons dynpros with ALVs, thanks for the info :).
Regards.

Eventing in Portal page between Team Viewer and Custom Webdynpro for ABAP

We are trying to implement a new Portal page that contains a Team Viewer Iview and a custom Webdynpro for ABAP iview.
The idea is that the when a manager select one of his direct report in the Team Viewer, the custom Webdynpro for ABAP would pick up the selection_changed event and retrieve the data for the selected employee.
We followed the instruction provided by SAP in note 1112733 and it worked in our development environment. When we moved the iviews to our testing environment it stopped working.
I also used the Diagnostic Iviews provided by SAP and I get the same result: Works in Dev, does not work in QA or in Prod.
We also followed the troubleshooting steps of note 945516 and it still did not help us. We can not find a difference in our system set up.
We are therefore looking for pointers as to what could be our problem.
Thanks!
Edited by: Benoit Fortin on Feb 20, 2009 2:28 PM

Problem was solved internally:
The reasons the eventing worked in Dev and not in QA or Prod, was that we had a different level of patch for ESS/MSS between instances, which I was not aware of.
Dev was on ESS/MSS version 600 SP14 and QA and Prod was on a different level. Once we implemented ESS/MSS SP 14 accross the board, everything was good.
Edited by: Benoit Fortin on Nov 13, 2009 11:57 AM

How to integrate WebDynpro for ABAP application with SAPEnterprisePortal7.0

Hi WebDynpro for ABAP Experts,
We developed an WebDynpro for ABAP application on R/3, and now we are planning to show this as an iview on SAP Portal EP7.0 (SAP j2EE Engine--Java stack). is it possible to integrate this application with portal?
If so can you proviode me the way how can we achieve this?
ADV Thanks
Regards
Phani

Hi Alex,
Thanks for your response.
I already created the system object R/3 Backend.
Actually some WebDynpro java applications/iViews are currently running on Portal. and the developers developed these in NWDS and deployed the .sca files on the Portal server and we created Webdynpro for java iViews.
but now the requirement is creation of webDynpro for ABAP views.
The developers developed WebDynpro for ABAP on the R/3 system. So what are the parameter values we need to give at teh time of creation of WebDynpro for ABAP iview like the Namespace, Application name etc which are mandatory values and how the Portal server detects the application, this means no need to deploy the application on the Portal server?
Shall we need to maintain any JCo Destinations or not?
Pl share your ideas.
ADV Thanks
Regards
Phani

Webdynpro for ABAP and Portal Integration

Hi Experts,
we created a WebDynpro for ABAP application for portal. The application will modify/update few fields in backend sap HR table PA0006 (infotype 6) . The end user (portal user) should be able to update his data in backend with the iview created on this application.
I have below two questions in my mind.
1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
Thanks
Ajay

1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
Answer: If you use, for exemple ITS to access this Webdympro, you will not need any action on portal for sure. Actually you will just need actions on portal, if you want to make some customization on portal side. If you want just show the Webdympro how it is, your action are all on backend..
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
If you access via ITS, te custome will acess the backend with the user you have set on the SSO or user-mapping. The portal there is nothing to do in this regards, you must just take care of this on backend.
Please evaluating the answer you are contributing for the SDN keep growing.
Edited by: Fabio Sarmento on Sep 19, 2011 2:41 PM

Standard iViews in WebDynpro for ABAP: where to find?

Dear Community,
does anybody know a source where to find information about SAP standard iViews shipped by SAP as WebDynpro for ABAP?
Thanx and regards,
Stefan
Edited by: Stefan Kaiser on Jun 25, 2008 2:28 PM

i guess a bug

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Portal Password Reset Application In webdynpro for ABAP

Hello Friends,
I am new to WDA . I want to create a Password Reset application in WDA like this
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0c09b9d-52e0-2d10-3981-86bfa8e19dc3?quicklink=index&overridelayout=true]
Can someone pls give the solution , how to start??
Thanks in advance
Himani

I am afraid that this is not going to be possible for you. From WebDynpro for ABAP, you do not have portal API's to do that.
May be an idea ,If you have SSO in place you could try to call some FM's in r3 side to change the password in r3 system and this would synchronize the UME in portal.

Portal integration of Webdynpro for ABAP application

Hi all,
Can anyone provide me with the steps for <b>integrating a Webdynpro for ABAP application with portal?</b>
Regards,
Bino

Hi Bino
Check out the following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/portal integration of web dynpro applications.pdf
Regards
Rajeev.
Do award points for helpful answers in SDN.

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Settings Portal eventing - WebDynpro for Abap iView communication

Similar Messages

Maybe you are looking for